Filter Your Results

Anchors, Connectors, & Fasteners

• Categories
• Anchors & Connectors

---

• Category Description

  

  • ADHESIVES (1)
  • ANCHORS & ANCHOR KITS (157)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (48)
  • BOX SUPPORT (37)
  • CABLE & PIPE TRANSITS (46)
  • CADDY (STRAPS ONLY) (31)
  • Commercial switches (1)
  • Comp & Mech Lugs and Butt Splices (739)
  • CONDUIT HANGERS/STAND OFF STRAPS (4)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (2)
  • Datacom Wiring Devices and Accessories (86)
  • DECORATIVE RESIDENTIAL (1)
  • Disconnect Accessories (3)
  • DISCONNECTS (9)
  • EXOTHERMIC GROUNDING PRODUCTS (6)
  • FASTENERS (71)
  • FLEX & MC FITTINGS (13)
  • Fluorescent Fixtures & Accessories (1)
  • Fuses & Fuse Accessories (34)
  • HAND TOOLS (47)
  • HEAT/COLD SHRINK (203)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (7)
  • MISC FITTINGS (9)
  • Miscellaneous residential devices (2)
  • MOLDED CASE BREAKERS (1)
  • POWER TOOL ACCESSORIES (3)
  • POWER TOOLS (1)
  • Powerdefense Breakers (11)
  • PULL LINE, ROPE, CARRIERS (1)
  • Residential cord connectors (2)
  • Residential Switches (1)
  • SAFETY PRODUCTS (9)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (883)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (93)
  • SPLICE KITS (48)
  • SPLIT BOLTS (251)
  • SPRING NUTS & TWIRL NUTS (10)
  • STEEL BOXES & COVERS (3)
  • T&B C TAP LUGS (41)
  • TAPE (201)
  • TERMINAL BLOCK ACESSORIES (45)
  • TERMINAL BLOCKS POWER DIST BLOCKS (82)
  • TERMINALS (333)
  • THREAD RODS (3)
  • TOOL BAG/POUCHES (1)
  • WIRE LUBE, MARKERS, & TIES (152)
  • WIRE NUTS (79)
  • Show More...

• Poles

  

  • 1 (213)
  • 2 (1)
  • 3 (2)
  • 3 in (2)
  • 600 V (1)
  • Three-pole (2)
  • Show More...

• Brand

  

  • 3M (167)
  • 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS (2)
  • 3M(TM) (1)
  • 3M[T] (1)
  • ABB (1)
  • AMERICAN INDUSTRIAL (1)
  • ARLINGTON (3)
  • Arlington Industries (2)
  • AUSTIN BOLT (2)
  • BERTREM PRODUCTS INC (1)
  • Blackburn Grounding (14)
  • Blackburn Mechanical (162)
  • Blueline (1)
  • Brady® (62)
  • Bridgeport (2)
  • BRISCON (2)
  • Buchanan (34)
  • BURNDY (289)
  • Burndy Canada (65)
  • Burndy LLC (9)
  • CADDY (1)
  • CALBRITE (8)
  • Catamount (32)
  • Color Keyed / Blackburn (2)
  • COLOR-KEYED (166)
  • Connector Bloks(TM) (16)
  • COOPER WIRING DEVICES (1)
  • CULLY (1)
  • Deltec (2)
  • Dottie (9)
  • DOTTIE L H COMPANY (1)
  • Dual Lock (1)
  • DYMO (1)
  • EASYHEAT (1)
  • Easy-Twist (2)
  • Eaton (153)
  • EATON B-LINE SERIES (1)
  • Eaton Corp (7)
  • EATON CROUSE-HINDS SERIES (2)
  • EATON CUTLER-HAMMER (45)
  • Engineered Products CO. (1)
  • Erico, Inc. Eritec-Caddy (11)
  • EZ-Code (11)
  • E-Z-Code Id (8)
  • FASTENERS, INC. (4)
  • Gardner Bender (32)
  • Hellermanntyton (4)
  • Highland (14)
  • Homac (6)
  • HYLUG[TM] (1)
  • Ideal (142)
  • Ilsco (21)
  • Ilsco Corporation (42)
  • Impact Staples (3)
  • Kindorf (1)
  • King (1)
  • Klein Tools (10)
  • L.H. Dottie CO. (33)
  • LEGRAND-PASS & SEYMOUR (1)
  • LH DOTTIE (429)
  • M18(TM) (1)
  • Metallics (1)
  • milwaukee (2)
  • Milwaukee Electric Tool (8)
  • Milwaukee® (8)
  • Minnesota Mining (3M) (78)
  • Newell (Dymo) (11)
  • NSi (266)
  • Nsi Industries (149)
  • nVent CADDY (73)
  • nVent ERICO (6)
  • PANDUIT (357)
  • Panduit Corporation (3)
  • Panduit® (2)
  • Pass & Seymour (1)
  • Pass and Seymour (1)
  • Peco Fasteners (208)
  • Peco Fasteners, Inc. (175)
  • Performance Plus (2)
  • Platinum Tools (7)
  • Polaris (49)
  • Rack-A-Tiers (5)
  • Rectorseal (1)
  • Satco (1)
  • Scotch (47)
  • Scotchcast (5)
  • ScotchCode (4)
  • Scotchfil (1)
  • Scotchlok (42)
  • Scotchlok[T] (1)
  • Scotchlok[TM] (1)
  • Scotchrap (1)
  • Scotch-Seal (2)
  • Selecta Products (20)
  • Shrink-Kon (3)
  • Southwire (6)
  • Sta-Kon (162)
  • Steel City (2)
  • Super 33+ (2)
  • T&B Elec Suppl (9)
  • T&B Ind Fitting (6)
  • Tartan (2)
  • TE CONNECTIVITY / ENERGY (3)
  • Temflex (13)
  • Thomas & Betts (24)
  • Thomas Lighting (1)
  • Thomas&Betts-Abb Ins Prod (18)
  • Tiffin Insulators CO. (2)
  • Tools & Accessories (1)
  • Tork(R) (1)
  • TRINITY ELECTRIC SUPPLY (1)
  • Ty-Fast (1)
  • Ty-Grip (1)
  • Ty-Rap (69)
  • UNISTRUT (1)
  • Unistrut Corp. (3)
  • W.W. Cross Inc. (7)
  • WAGO CORPORATION (2)
  • Weidmuller, Inc. (13)
  • XX-Marathon Special Products (4)
  • Show More...

• Voltage Rating

  

  • 1000 V (4)
  • 12 (1)
  • 120/277 (2)
  • 1k (5)
  • 1k/5k (4)
  • 2 (1)
  • 2000 (3)
  • 250 (1)
  • 300 (10)
  • 300 kV (1)
  • 300 V (9)
  • 300, 400 (2)
  • 300/600 V (1)
  • 35 (58)
  • 35 kV (13)
  • 35,000 (219)
  • 35000 V (1)
  • 35kV (2)
  • 600 (321)
  • 600 A (1)
  • 600 V (365)
  • 600 V (Building Wiring);1000 V (Signs/Fixture) (8)
  • 600 V ac (28)
  • 600 V ac/dc (1)
  • 600 V Max (1)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (5)
  • 600 V to 35 KV (2)
  • 600 V, 1000 V (LIGHTING FIXTURE/LUMINARIE/SIGN) (1)
  • 600 Volt (5)
  • 600/1000 (6)
  • 600V (3)
  • EN 550V, UL 600V, 800V connection (2)
  • IEC 500V, UL 150V (4)
  • IEC 800V, EN 550V, UL 600V (1)
  • IEC 800V, EN 700V, UL 600V (11)
  • IEC 800V, UL 300V (1)
  • NA (17)
  • UL 300,600V, 500V connection (1)
  • UL 300V (1)
  • Show More...

• Minimum Qty

  

  • 10 (11)
  • 100 (403)
  • 1000 (48)
  • 10000 (1)
  • 15 (3)
  • 150 (4)
  • 15000 (1)
  • 2 (2)
  • 20 (7)
  • 200 (8)
  • 20000 (1)
  • 225 (1)
  • 25 (43)
  • 250 (13)
  • 300 (4)
  • 3000 (1)
  • 30000 (1)
  • 350 (1)
  • 35000 (1)
  • 4000 (1)
  • 5 (2)
  • 50 (151)
  • 500 (69)
  • 5000 (8)
  • 6000 (3)
  • 75 (4)
  • 750 (2)
  • 7500 (1)
  • 8000 (1)
  • Show More...

• Number Of Conductors

  

  • 1 (93)
  • 1 to 5 (11)
  • 1 to 6 (26)
  • 10 (2)
  • 12 (2)
  • 2 (184)
  • 2 to 3 (Aluminum to Copper);1 to 6 (Copper to Copper) (3)
  • 2 to 3 Aluminum to Copper; 1 to 6 Copper to Copper (1)
  • 2 to 4 (4)
  • 2 to 5 (8)
  • 2 to 6 (11)
  • 3 (32)
  • 3 to 5 (2)
  • 4 (19)
  • 5 (7)
  • 6 (9)
  • 8 (5)
  • Show More...

• Color

  

  • Aluminum (18)
  • Black (297)
  • Black (BK) (1)
  • Black Lettering - Orange Background (1)
  • Black on Bright Red (1)
  • Black on Orange (1)
  • Black on Red (1)
  • Black on White (4)
  • Black Print on White (2)
  • Black, Blue, Red Printed on White (1)
  • Black, Red on White (1)
  • BLACK, YELLOW (1)
  • Blue (170)
  • Blue Light (1)
  • Blue/Gray (2)
  • Bronze (3)
  • Brown (85)
  • Brown, Orange, Yellow Print on White (1)
  • Chromated steel (2)
  • Clear (24)
  • Clear/White (1)
  • Colorless (7)
  • Colorless/White (1)
  • Copper (28)
  • Gold (2)
  • Gray (67)
  • Gray 0 (2)
  • Green (50)
  • Green/Black (1)
  • Green/black/red (1)
  • GREEN/YELLOW (3)
  • Grey (18)
  • Ivory (47)
  • Light Blue (1)
  • Light Grey (1)
  • Matte Black Finish (3)
  • Metallic (49)
  • Miscellaneous (2)
  • Multi Color (1)
  • Multiple Colors (1)
  • Natural (18)
  • OLIVE (5)
  • Orange (42)
  • Pink (37)
  • Purple (35)
  • Red (140)
  • Red (Main) - Red (Tap) (1)
  • Red and Black Header on White (1)
  • Red Safety (1)
  • Red Striped Background (2)
  • Red, Blue, Yellow (1)
  • Red/Silver/Black (1)
  • Red/Tan (3)
  • RUBY (4)
  • Silver (43)
  • Stainless (3)
  • Steel (2)
  • Tan (17)
  • Tan, Yellow, Red, & Blue (1)
  • Tin Plated Copper (12)
  • Ultraviolet Black (1)
  • UV BLACK (1)
  • Various (4)
  • Violet (3)
  • White (83)
  • WHITE GLOSS (2)
  • Yellow (126)
  • Yellow Handle (3)
  • ZINC PHOSPHATE (1)
  • Show More...

• Finish

  

  • Acrylic (3)
  • Aluminum (44)
  • Anodized (2)
  • Bare (4)
  • Black Annealed (2)
  • Black Oxide (15)
  • Black Phosphate (3)
  • blank (8)
  • Blue (3)
  • Bronze (9)
  • Caddy?® Armour (33)
  • CADDY® ARMOUR (5)
  • Ceramic Coated (3)
  • Ceramic Coated Blue (4)
  • CHROME (1)
  • COPPER (19)
  • COPPER PLATED (12)
  • DETENTE ASSEMBLY (1)
  • Dip Coat-Primed/Powder-Coated/Textured Paint (10)
  • Electro Galvanized (4)
  • Electro Plated (1)
  • Electro -Tin Plated (2)
  • Electro-galvanized (4)
  • ELECTROGALVANIZED (2)
  • Electrogalvanizing (1)
  • EPDM Rubber Insulated (8)
  • Galvanized (11)
  • Gloss (20)
  • Graphite Metallic (12)
  • Green (4)
  • Green Zinc Plated (1)
  • Matte (33)
  • Nickel (1)
  • Nickel-Plated (1)
  • NO FINISH (4)
  • nVent CADDY Armour (3)
  • Painted (4)
  • Plain (13)
  • PLAIN (NO FINISH) (1)
  • Plastisol (2)
  • Plastisol Insulated (85)
  • POLISHED (6)
  • Polycarbonate (3)
  • Polypropylene (2)
  • Pre-Galvanized (18)
  • Pre-galvanized; CADDY® ARMOUR (1)
  • Red (1)
  • Silicone (3)
  • Smooth (1)
  • STAINLESS STEEL (18)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (28)
  • Tin Plated (248)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tinned (6)
  • Tin-Plated (111)
  • Uncoated (2)
  • Unplated (6)
  • Weather Resistant Coated (1)
  • white (2)
  • YELLOW (1)
  • Yellow Zinc (8)
  • Yellow Zinc Plated (4)
  • Zinc (54)
  • Zinc electro-plate (1)
  • Zinc Phosphate (72)
  • Zinc Plated (382)
  • Zinc-Plated, Tin-Plated Steel Sleeves (2)
  • Show More...

• Head Style

  

  • Bugle (16)
  • Flat (24)
  • Hex (89)
  • Mushroom (4)
  • Open Eye (3)
  • Pan (3)
  • Round (32)
  • Slotted (4)
  • Slotted;Mushroom (1)
  • Square (5)
  • Wafer (17)
  • Show More...

• Material

  

  • 1 (1)
  • 18-8 STAINLESS STEEL (20)
  • 304 Stainless Steel (3)
  • 316 Stainless Steel (4)
  • ABS (4)
  • Acrylonitrile butadiene styrene (3)
  • Aluminium;Aluminum (1)
  • Aluminum (363)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum Alloy-Tin Plated (5)
  • Aluminum, Glass Filled Polyester Base (1)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • Aluminum/Glass/Polyester (7)
  • ASTM A36/A575/A576/A635/A1011 Grade 33 Low Carbon Steel (2)
  • Body - Modified Neoprene Elastomer, Straps - Nylon (1)
  • Brass (40)
  • Brass and Nickel Plated (1)
  • Brass with Copper Sleeve (9)
  • Brass-Alloy (2)
  • Bright Dipped Cast High Copper Alloy Body, Durium Silicon Bronze Hardware (1)
  • Bronze Alloy (17)
  • Bronze Alloy, Leaded (11)
  • Bronze, Leaded, Commercial (6)
  • Carbon Steel (19)
  • Carrying Case is Plastic (1)
  • CASE HARDENED ASTM A576, ASTM A570 1015, 45 MILD STEEL (2)
  • CAST STEEL (1)
  • Clear Acrylic (3)
  • Cold Rolled High Carbon Steel (50)
  • Cooper (2)
  • Copper (758)
  • COPPER ALLOY (40)
  • Copper Alloy, Cast (9)
  • Copper Sleeves (2)
  • Copper, Beryllium (1)
  • Copper;Copper alloy (1)
  • Cotton (1)
  • Cotton Cloth (1)
  • Cotton, Rubber (1)
  • Economy Vinyl (1)
  • ELECTROLYTIC TIN PLATED SEAMLESS COPPER (5)
  • Electro-Tin Plated Copper (1)
  • Engineered Plastic (1)
  • EPDM RUBBER (1)
  • EPR Rubber, Acrylic Adhesive (2)
  • Extruded Polymer (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Fiberglass (1)
  • Flame-retardant Polypropelene (27)
  • Flame-retardant polypropelene shell (5)
  • Flame-Retardant Polypropylene (30)
  • FLEXIBLE POLYOLEFIN (3)
  • Galvanized Steel (4)
  • Glass Filled Nylon (1)
  • Glass/Polyester (1)
  • GMV3 Self-Laminating Vinyl (1)
  • Grade 5 Steel (8)
  • Graphite Metallic Steel (8)
  • Heat-shrink Polyolefin (18)
  • High Conductivity Copper (12)
  • HIGH CONDUCTIVITY WROUGHT COPPER (1)
  • High copper content hard drawn rod (1)
  • Hot Dip Galv (2)
  • Hot Rolled, Pickled and Oiled Plate or Strip Steel (3)
  • Insulated Nylon (2)
  • Lead (2)
  • LEADED BRONZE ALLOY (10)
  • Linerless EPR (4)
  • Linerless;Rubber (1)
  • Low Carbon Cold Drawn Steel (3)
  • Low Carbon Steel (25)
  • Lumber (2)
  • Malleable Iron (2)
  • MASTIC (1)
  • Metal (1)
  • Metal/Polypropylene (1)
  • Metal;Polyethylene (Insulator) (1)
  • Natural Nylon 6/6 (1)
  • Nickel Alloy (1)
  • NICKEL PLATED STEEL (1)
  • Non-Adhesive Polyethylene (1)
  • Non-Metallic (1)
  • Nylon (37)
  • NYLON 6 (1)
  • Nylon 6.6 (14)
  • Nylon 6/6 (13)
  • Nylon 66 (2)
  • Nylon 6-6 (4)
  • Nylon Housing, Copper Alloy Contacts (3)
  • Nylon Zipper (1)
  • Nylon/Polyamide 12 (1)
  • Nylon/Polyamide 6.6 (74)
  • Nylon/Polyamide 6.6 Weather Resistant (4)
  • Permanent Polyester (1)
  • PET (4)
  • Plastic (25)
  • Plastic Housing (3)
  • Plastic/Foil (3)
  • Plastic-Impregnated Cloth (9)
  • Plasticized PVC (3)
  • Plastisol (1)
  • Poly coated Cloth, Rubber adhesive (2)
  • Polycarbonate (3)
  • Polyester (16)
  • Polyester with Polyester Overlaminate (1)
  • Polyethylene (17)
  • Polyethylene (PE);Polyamide 6 (PA6) (1)
  • Polyethylene Coated Cloth (1)
  • Polyethylene Film (2)
  • Polyethylene with Cotton Webbing (1)
  • Polymer, Butyl Rubber (1)
  • Polyolefin (40)
  • Polypropylene (14)
  • Polyvinyl Chloride (3)
  • Porcelain (1)
  • Pre-Galvanized Steel (5)
  • PVC (3)
  • Rubber (3)
  • Rubber (Adhesive);Polyethylene Over Cloth Scrim (Backing) (1)
  • Rubber Based Elastic Putty (1)
  • Self-Laminating Vinyl (1)
  • Sheet Metal (1)
  • Silcone Bronze (2)
  • SILICON (9)
  • Silicon Bronze (21)
  • Silicone Adhesive (1)
  • Silicone Bronze (1)
  • SILICONE RUBBER (1)
  • Silicone Rubber;Easy Strip Liner;Easy Tear Liner (1)
  • Smooth Plastic (8)
  • Solid Aluminum Foil Core (1)
  • Spring Steel (3)
  • Stainless Steel (51)
  • Stainless Steel Type 316 (1)
  • Steel (556)
  • Steel (Blade) (2)
  • Steel (Screw) (5)
  • Steel/Zinc (1)
  • Steel; Spring Steel (1)
  • Thermoplastic (31)
  • THERMOPLASTIC POLYESTER (1)
  • Thermoplastic Rubber (1)
  • TIN PLATED BRASS (1)
  • TIN PLATED COPPER (7)
  • Tin-Plated Aluminum (2)
  • Tin-Plated Copper (80)
  • UV-Rated Plastic (1)
  • Varnished Cambric (1)
  • Vinyl (80)
  • Vinyl Cloth (12)
  • Vinyl Coated White Cloth (4)
  • Vinyl Film (1)
  • Vinyl Impregnated Cloth Film (4)
  • Vinyl Impregnatted Cloth (2)
  • Vinyl Insulation (1)
  • Vinyl-Impregnated Cloth (7)
  • Weather Resistant Acetal (2)
  • Weatherable Polyethylene (1)
  • Weather-Resistant Nylon 6.6 (16)
  • Weather-Resistant Nylon 6-6 (2)
  • Zamac Alloy (10)
  • Zamac Metal (2)
  • Zinc (32)
  • Zinc-Plated Steel Screw (2)
  • Show More...

• Stud Size

  

  • #10 (2)
  • 0.19 (3)
  • 0.25 (25)
  • 0.3125 (13)
  • 0.375 (32)
  • 0.5 (44)
  • 0.625 (10)
  • 1/2 (61)
  • 1/2 in (9)
  • 1/2 INCH (1)
  • 1/4 (58)
  • 1/4 in (1)
  • 1/4 INCH (1)
  • 3/8 (58)
  • 3/8 in (2)
  • 42.826 (1)
  • 5/16 (7)
  • 5/16 in (2)
  • 5/16 INCH (1)
  • 5/8 (2)
  • 8 (1)
  • NA (1)
  • Show More...

• Wire Type

  

  • 2 Conductor With Ground (1)
  • 3 Conductor With Ground (1)
  • Al/Cu (4)
  • ALUMINUM/COPPER (4)
  • B,C,D,K,M,I (12)
  • Class A & B (33)
  • Class B & C (86)
  • COPPER (12)
  • CU Wire Only (22)
  • Cu/Cu (8)
  • SOLID (1)
  • Solid, Stranded, Stranded (Tin Bonded) (11)
  • SOLID/STRANDED (1)
  • STRANDED (2)
  • Show More...

• Temperature Rating

  

  • 105 C (41)
  • 105 DEG C (1)
  • 105 DEG C Shell Rated (11)
  • 105° C (3)
  • 122 (8)
  • 131 TO 275 DEG F (3)
  • 135 °C (2)
  • 150 (1)
  • 150 C (3)
  • 150 DEG C (4)
  • 170 (4)
  • 194 (30)
  • 194° F (6)
  • 221 DEG F (1)
  • 221 Degrees Fahrenheit (105 Degrees Celsius) (56)
  • 230 (1)
  • 257 (4)
  • 257 Deg F (4)
  • 302 Degrees Fahrenheit (150 Degrees Celsius) (5)
  • 32 TO 120 DEG F (1)
  • -40 °F - 158 °F (1)
  • -40 F to 250 F (2)
  • -40 To 180 (8)
  • -40 TO 221 DEG F (1)
  • -40 To 300 Deg F (1)
  • -40° C to 135 °C (1)
  • 75 C (9)
  • 90 (13)
  • 90 °C (3)
  • 90 C (222)
  • 90°C (1)
  • 900 DEG F (1)
  • 90c (1)
  • B7613 (1)
  • Max 90 C (4)
  • Over 105 C , Over 221 F (1)
  • THREADING MACHINE PIPE PLUG, 1/8 INCH NPT DESIGNATED SIZE; PIPE PLUG; 535, 535-A, 535-M USED ON MODEL/BRAND; PIPE AND BOLT THREADING MACHINE USED ON POWER TOOL; NUMBER OF QUANTITY 2; WARRANTY LIFETIME (1)
  • to 221 F , 105 C (1)
  • up to 90 C (10)
  • Show More...

• Insulation Material

  

  • Copper (1)
  • EPDM Rubber (4)
  • Flame Retardant Polycarbonate (3)
  • Nylon (8)
  • Plastisol (36)
  • Polypropylene (1)
  • PVC (2)
  • Silicon Bronze (1)
  • Silicone Bronze (4)
  • Thermoplastic (17)
  • Vinyl (48)
  • Wemid (10)
  • Show More...

• Color Code

  

  • BLACK (18)
  • BLUE (18)
  • BROWN (20)
  • GRAY (12)
  • GREEN (11)
  • OLIVE (1)
  • ORANGE (7)
  • PINK (13)
  • PURPLE (7)
  • RED (21)
  • RUBY (1)
  • TAN (2)
  • WHITE (9)
  • YELLOW (12)
  • Show More...

• Thread Size

  

  • #10 (27)
  • #10-12 (1)
  • #10-24 (7)
  • #10-32 (9)
  • #12 (14)
  • #12-24 (2)
  • #14 (5)
  • #6 (22)
  • #6-32 (32)
  • #8 (32)
  • #8-32 (16)
  • 0.138 (3)
  • 0.164 (3)
  • 0.1875 (1)
  • 0.19 (1)
  • 0.25 (1)
  • 1/2 (1)
  • 1/2 in - 13 (8)
  • 1/2-13 (13)
  • 1/4 (14)
  • 1/4 in - 20 (20)
  • 1/4-20 (27)
  • 13 (1)
  • 16 (1)
  • 20 (4)
  • 3/16 (2)
  • 3/4-10 (1)
  • 3/8 (8)
  • 3/8 in - 16 (16)
  • 3/8-16 (24)
  • 32 (17)
  • 5/16 (2)
  • 5/16-18 (2)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Adjoining Terminal (1)
  • Block Fork (1)
  • Butt Connector (2)
  • Butt Splice (3)
  • Compression (38)
  • Compression Lug (3)
  • Compression;Crimp (22)
  • Crimp (6)
  • Disconnect Terminal (7)
  • Distribution Terminal (1)
  • Feed-Through Terminal (6)
  • Female Disconnecter (3)
  • Fork Terminal (18)
  • Insulation Displacement Connector (3)
  • Male Tab (1)
  • Push-In (3)
  • Ring Terminal (9)
  • Ring Tongue (7)
  • Screw (69)
  • Spade Terminal (1)
  • Splice Connector (4)
  • Split (29)
  • Spring (2)
  • Tension (2)
  • Tongue (38)
  • TUBULAR WIRE CLAMP WITH SCREW (1)
  • Twist-On (12)
  • Winged (10)
  • Wire Joints (1)
  • Wire Terminal Disconnect (2)
  • Show More...

• Diameter

  

  • #10 (1)
  • #10 AWG (31)
  • #12 AWG (7)
  • #14 AWG (3)
  • #6 AWG (36)
  • #8 (1)
  • #8 AWG (35)
  • 0.105 (2)
  • 0.125 (1)
  • 0.125 in Diameter as Supplied (1)
  • 0.135 (1)
  • 0.16 - 0.44 (1)
  • 0.187 (2)
  • 0.187 in Diameter as Supplied (5)
  • 0.25 (1)
  • 0.25 - 0.75 (1)
  • 0.25 in (1)
  • 0.25 in Diameter as Supplied (3)
  • 0.375 (1)
  • 0.375 in (1)
  • 0.375 in Diameter as Supplied (3)
  • 0.38 (2)
  • 0.5 in (1)
  • 0.5 in Diameter as Supplied (1)
  • 0.63 - 1.0 (1)
  • 1.00 - 1.50 (1)
  • 1.27 (1)
  • 1/2 (20)
  • 1/2 in (16)
  • 1/2 in (ID) (7)
  • 1/2 in (ID);1-1/2 in (OD) (2)
  • 1/2 in (ID);1-1/4 in (OD) (1)
  • 1/2 in (ID);1-3/8 in (OD) (1)
  • 1/4 (42)
  • 1/4 in (43)
  • 1/4 in (ID) (6)
  • 1/4 in (ID);1 in (OD) (2)
  • 1/4 in (ID);1-1/2 in (OD) (2)
  • 1/4 in (ID);1-1/4 in (OD) (3)
  • 1/4 in (ID);3/4 in (OD) (1)
  • 1/4 in (ID);5/8 in (OD) (1)
  • 1/8 (2)
  • 19.1-19.1 (1)
  • 2.390 x 1.188 x 1.375 in (1)
  • 3/16 (4)
  • 3/16 in (6)
  • 3/16 in (ID);1-1/4 in (OD) (1)
  • 3/8 (35)
  • 3/8 in (18)
  • 3/8 in (ID) (9)
  • 3/8 in (ID);1 in (OD) (1)
  • 3/8 in (ID);1-1/2 in (OD) (2)
  • 3/8 in (ID);1-1/4 in (OD) (2)
  • 3/8 in (ID);7/8 in (OD) (1)
  • 5/16 (5)
  • 5/16 in (1)
  • 5/8 (1)
  • 6 mm (ID) (1)
  • Show More...

• Insulation Color

  

  • Black (44)
  • Black (Code) (3)
  • Black (Die Color) (6)
  • Blue (37)
  • Blue (Code) (13)
  • Blue (Die Color) (5)
  • Blue/Gray (2)
  • Brown (3)
  • Brown (Code) (6)
  • Brown (Die Color) (8)
  • Clear (2)
  • Copper (1)
  • Dark Beige (9)
  • Gray (22)
  • Gray (Code) (5)
  • Gray (Die Color) (5)
  • Green (10)
  • Green (Code) (1)
  • Green (Die Color) (3)
  • Green/Yellow (2)
  • Light Blue (1)
  • Metallic Silver (2)
  • Olive (Code) (1)
  • Orange (12)
  • Orange (Code) (2)
  • Orange (Die Color) (3)
  • Orange/Blue (2)
  • Orange;Red (1)
  • Pink (1)
  • Pink (Code) (3)
  • Pink (Die Color) (3)
  • Purple (6)
  • Purple (Code) (3)
  • Purple (Die Color) (3)
  • Red (30)
  • Red (Code) (2)
  • Red (Die Color) (7)
  • Red/Yellow (3)
  • Red;Blue;Yellow (1)
  • Silver (3)
  • Tan (5)
  • Tan/Red (2)
  • Tan/Yellow (2)
  • Tan;Yellow;Red;Blue (1)
  • White (1)
  • White (Code) (1)
  • Yellow (41)
  • Yellow (Code) (2)
  • Yellow (Die Color) (2)
  • Yellow (Handle) (1)
  • Yellow;Gray (1)
  • Show More...

• Type

  

  • 2- Nail (4)
  • 2-Wire Standard Version (3)
  • ADHESIVE (3)
  • Aluminum Double Lug (5)
  • Aluminum Lay-In Lug (4)
  • Aluminum Pin Adapters (4)
  • Aluminum Splice (15)
  • Aluminum Split Bolts (5)
  • AMS, Dual Rated (5)
  • Anchor (52)
  • Anchor Kit (10)
  • Anchor Setting Tool (5)
  • ATR nut (3)
  • Barricade Tape (7)
  • Beam fasteners (7)
  • BIBD, Multi-Port (5)
  • Bolt (20)
  • Bolted Lugs & Terminals (20)
  • Braided Expandable Sleeving (4)
  • Breatout Boot (4)
  • Bugle Head Drywall Screw (8)
  • Bugle Head Wood Rocket Drywall Screw (12)
  • Butt Splice (10)
  • Butted (4)
  • CABLE CLAMP (3)
  • Cable Staples (3)
  • Cable Tie (31)
  • Cable Tie Mount (12)
  • Cable/Conduit to Stud (4)
  • Cap Screw (22)
  • Cold Shrink End Cap (4)
  • Cold Shrink Splice (5)
  • Combo nut washer (3)
  • Compression Lug (101)
  • Compression Splice (12)
  • Compression Splice Service Entrance (50)
  • Compression Tap (14)
  • Conduit and Box Support Fastener (8)
  • Conduit fastener (4)
  • Conduit Locknut (4)
  • Conduit to beam fastener (27)
  • Conduit to conduit fastener (3)
  • Conduit to rod fastener (5)
  • Conduit to stud fastener (5)
  • Copper C Taps (3)
  • Copper Connectors (8)
  • Copper Split Bolts (11)
  • Corrugated Loom Tubing (5)
  • Covered Single Wire Ferrule (8)
  • Covers (3)
  • C-Tap (8)
  • C-Taps (5)
  • C-Type Compression Tap (4)
  • Deck Screw (5)
  • DETECTABLE (6)
  • Disconnect (16)
  • Disconnect Connectors (3)
  • Double Primary (6)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (5)
  • Drop in Anchor (5)
  • Dual-Rated (5)
  • Dual-Rated Mechanical Connector (24)
  • Eye Bolt (5)
  • FENDER WASHER (20)
  • Finished Hex Nut (13)
  • FLAT WASHER (15)
  • Fork Terminal (11)
  • Full Thread Wedge Anchor (12)
  • GAR (22)
  • GB (4)
  • GBM (3)
  • GC (5)
  • GC-CT (3)
  • GD (4)
  • GENERAL PURPOSE (18)
  • GRC, High Strength (3)
  • Ground Machine Screw (3)
  • Grounding Connector (4)
  • Hammer-On Flange Clips (5)
  • Hanger (13)
  • Hardware & Rough-In (8)
  • HEAT (7)
  • Heat Shrink Label (14)
  • Heat Shrink Tubing (25)
  • HEAVY DUTY (9)
  • Heavy Wall (17)
  • Hex Bolt (62)
  • Hex Head Concrete Anchor System (6)
  • Hex Head Lag Screw (27)
  • Hex Head Tap Bolt (21)
  • HEX NUT (7)
  • Hex Washer (3)
  • Hexagonal Nut Sleeve Anchor (4)
  • HIGH PERFORMANCE (39)
  • H-Type Compression Tap Connector (11)
  • Inline (7)
  • Inline Splice (10)
  • IN-Line Splicer/Reducer (8)
  • Installation Tool (3)
  • INSULATED (4)
  • Insulated Conductor Connectors (4)
  • Insulating Sleeve (13)
  • Insulation Displacement (10)
  • Insulation Piercing Connectors (3)
  • Integrated Mounting Hole (6)
  • INTERMEDIATE (10)
  • Jack Chain (5)
  • KC and K2C Series (22)
  • KC Series Mechanical Grounding Connector (8)
  • K-Lath Screw (6)
  • KS (6)
  • KS, Compact (7)
  • KSU, Universal (9)
  • Label Printers and Labels (4)
  • linerless Ethylene Propylene Rubber (3)
  • LOCK WASHER (12)
  • LOCKING (5)
  • Locking Fork Terminal (10)
  • Long Barrel (66)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (27)
  • Long Barrel - Two Hole (19)
  • Long Barrel Copper Splice (4)
  • Long Barrel, Tin Plated (41)
  • Low Voltage Mounting Plates (8)
  • MACHINE SCREW (102)
  • Machine Screw Hex Nut (4)
  • Machine Screw Kit (4)
  • Mechanical Grounding (14)
  • Mechanical Lug (10)
  • Mechanical Splicer/Reducer (3)
  • Mechanical Split Bolt Connector (15)
  • MINIATURE (4)
  • Molded case circuit breaker accessory (16)
  • Molds (3)
  • Motor Lead Pigtail Splice (7)
  • MOUNTING BASE (13)
  • Multi Cable (16)
  • Mushroom Head with Spring Wing (9)
  • Non-Insulated Ring Terminal (18)
  • Nut (15)
  • Nylon Fully Insulated Female Disconnect (6)
  • Nylon Fully Insulated Male Disconnect (3)
  • Nylon Insulated Butt Splice (4)
  • Nylon Insulated Female Disconnect (5)
  • Nylon Insulated Fork Terminal (8)
  • Nylon Insulated Locking Fork Terminal (3)
  • Nylon Insulated Ring Terminal (10)
  • Nylon Insulated Wire Joint (4)
  • Oval Head Wall Plate Screw (3)
  • Pan Head Self Drilling Screw (9)
  • Permanent Acrylic Adhesive (4)
  • PIGTAIL (7)
  • Pipe Wrap (3)
  • Polypropylene Insulated Ferrule (9)
  • Premium (11)
  • Premium Cable Tie (16)
  • Pre-printed Books (4)
  • Pre-Printed Wire Marker Book (4)
  • Printer Ribbon (6)
  • Pull Line Measuring Tape (5)
  • Purlin hanger (5)
  • Push-In (11)
  • QT-III (31)
  • Rejacketing Sleeve (7)
  • RING (12)
  • Ring Terminal (17)
  • Ring Tongue (10)
  • Rod and wire fastener (7)
  • Rod Coupling (10)
  • Rod/Wire (7)
  • ROOF FLASHING (5)
  • Rubber Insulating and Splicing (3)
  • SCREW (6)
  • Screw Gun Brackets and Accessories (5)
  • Secure Grip Wire Connectors (6)
  • Select Purpose (10)
  • Self Drill (24)
  • Self-Laminating Label (3)
  • Service (3)
  • Service Post Connectors (8)
  • Sheet Metal Screw (40)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (16)
  • Single (Thin) Wall (32)
  • Single cable hook (4)
  • Single Primary (5)
  • Single Sided Entry (22)
  • SLEEVE (18)
  • Solid Pin (10)
  • SP (3)
  • Spiral Wrap (8)
  • SPLICE (13)
  • Splice Connector (14)
  • Splicer/Reducer (7)
  • Split-Bolt (28)
  • Spring Nut (4)
  • Square washer (5)
  • Stable (8)
  • Stainless Steel (4)
  • STANDARD (4)
  • Standard Barrel (62)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Barrel, Tin Plated (49)
  • Standard Wire Connectors (9)
  • Strong Tack Adhesive (3)
  • Submersible Pedestal Connectors (9)
  • Tape Roll Dispenser with Tape (3)
  • Tape Roll Refill (10)
  • Tapping Screw (18)
  • Taps (19)
  • T-bar fastener and spacers (4)
  • Terminal Block (42)
  • Terminal block accessory (12)
  • Terminals (7)
  • T-Grid Box Hanger Accessories (4)
  • Thin-Wall Flexible Polyolefin (13)
  • Tin Plated Copper Split Bolt (9)
  • Toggle Bolt (4)
  • TP-F (5)
  • Twist-On (20)
  • Universal Terminal (7)
  • VINYL (25)
  • Vinyl Insulated Butt Splice (10)
  • Vinyl Insulated Female Disconnect (8)
  • Vinyl Insulated Fork Terminal (15)
  • Vinyl Insulated Locking Fork Terminal (20)
  • Vinyl Insulated Male Disconnect (8)
  • Vinyl Insulated Ring Terminal (37)
  • Voltage And Conduit, Large (3)
  • Voltage And Conduit, Medium (4)
  • Wafer Head Self Drilling Screw (6)
  • Wall Board Kit (6)
  • Wall Dog Kit (3)
  • WASHER (37)
  • Washer Head Self Drilling Screw (20)
  • Winged Wire Connectors (10)
  • WIRE (4)
  • Wire Marker Books (13)
  • Write-On Dispenser with Tape & Pen (3)
  • Y style toggle hook termination and kit (3)
  • YA-A (5)
  • YAEV, Heavy Duty (5)
  • YC-C Series (5)
  • YS, Long Barrel (18)
  • YS-L, Standard Barrel (10)
  • Zamac Anchor (9)
  • Show More...

• Application

  

  • "For Grounding CFS-1.00/2.20, Jacketed Cable, 1.00 in 2.20 in" (1)
  • "Moisture sealing and physical protection for cables, pipes or other cylindrical objects" (4)
  • (1) Clips on Sheet Metal Edges for Fast Mounting of Harness With Cable Ties(2) Allows Cable Tie Entry From All Four Sides for Easy Harness Orientation (1)
  • 2 Way Cable Tie Mount, used With Miniature, Intermediate, and Standard Cable Ties (1)
  • Acoustical, Ceiling and Partitioning; Electrical Fixing and Fastening (4)
  • All Wire and Cable Splices Rated Up to 600 Volts and 80°C (176°F);Harnessing of Wires and Cables (3)
  • Appliance and Fixture;Commercial Construction;Communication;Industrial Construction;Maintenance and Repair Operation;Mining;Solar;Utility;Wind Power;Applicable Stand;Motor Leads;Jacket Repairs;Bus Bar Insulation;Moisture-Sealing Electrical Connections (1)
  • Appliances;Fixtures;Automotive;Marine;Commercial Construction;Industrial Construction;Irrigation;Residential Construction (2)
  • Applications certified to 600 V and recommended up to 35 kV¥ (25)
  • Asset Tracking;Circuit Board Labeling;Component and Equipment Labeling;Data and Telecommunications Labeling;Electrical Labeling;General Identification;Laboratory Labeling;Wire and Cable Labeling;Facility Identification;Safety Identification (1)
  • Assets and Barcoding, Network Component, Labeling Panel, Face Plate and Shelves (1)
  • BALL-TYPE SWIVEL FIXTURE COVERS FOR PENDANT MOUNTED FIXTURES (2)
  • Basic, uninsulated Splices for Service Entrances. For Combinations of Aluminum-to-Aluminum or Aluminum-to-Copper Conductors (16)
  • Brick, Concrete (2)
  • Brick, Concrete, Mortar, Wood (27)
  • Bricks (5)
  • Bundling;Patching;Sealing (1)
  • Buried Pipes;Cables and Conduits (1)
  • Cable & Wire Marking;Panel Labeling (1)
  • Cable Bundling (6)
  • Caulks, Sealants, Adhesives (1)
  • Clear Insulated Multiple Tap Connectors (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (20)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (34)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (7)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (5)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (26)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (11)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (12)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsDatacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (6)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (6)
  • Commercial Construction;Communications;Industrial Construction;Irrigation;Maintenance and Repair Operations;Mining;Residential Construction;Solar;Utility;Wind Power (1)
  • Concrete Anchor (1)
  • Concrete, Block, Brick, Stone (4)
  • Concrete, Block, Brick, Stone, Light Duty Work (5)
  • Concrete, Brick or Block (1)
  • Concrete, Pipe Hanging, Conduit, Eye Rod, Cable Trays, Lighting Systems, Strut Channels, Overhead Utilities, Sprinkler Systems, Drop Ceilings, HVAC Duct, Electrical, Refrigeration (5)
  • Connection Between Roof Line and Service Entrance Conduit/Ventilation Pipe (2)
  • Construction;Industrial;Military (13)
  • Control Panel (1)
  • Corrosion Protection on Conduits;Fittings and Joints (2)
  • Covers wire and cable to protect from abrasion (5)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (26)
  • Datacom and Low Voltage; HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening (2)
  • Dead-End Self-supporting Drop Wire (3)
  • Decorative Lighting;Flood Light;Patio Lamp (1)
  • designed to seal the jacket end of power cables where elbows or other cable accessories are installed (1)
  • Developing Personal Identification Systems (1)
  • DIRECT BURIAL (1)
  • Direct Bury (2)
  • Drop Ceiling (2)
  • Drywall, Concrete, Brick, Block (3)
  • Drywall, Particle Board, Wood (12)
  • Drywall, Wood, Aluminum (8)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - OtherElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (1)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (28)
  • Electrical (17)
  • Electrical Fixing and Fastening (6)
  • Electrical Fixing and Fastening; Acoustical, Ceiling and Partitioning (5)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (19)
  • Electrical Fixing and Fastening; HVAC, Plumbing and Refrigeration; Datacom and Low Voltage (2)
  • Electrical Labeling;Wire and Cable Labeling (17)
  • Electrical Maintenance;Appliance and Fixture;Automotive and Marine;Commercial Construction;Industrial Construction;Irrigation;Maintenance and Repair Operations;Mining;Solar;Utility;Wind Power (1)
  • Electrical Maintenance;Appliance And Fixture;Commercial Construction;Industrial Construction;Irrigation;Maintenance (1)
  • Facility Identification;Safety Identification (1)
  • Fastens to surface with a hammer. (2)
  • Filled (1)
  • For 1/2 IN Drywall, Ceiling (1)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For All Combinations Of Copper, Aluminum, ACSR, AAAC, 5005, And Steel (9)
  • For Aluminum And Copper Conductors (17)
  • For Buchanan C24 Crimp Tool And Designed For Fast, Permanent, Pressure-Type Connections (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (10)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors (15)
  • For Combinations of Aluminum-to-Aluminum and Aluminum-to-Copper Conductors. Use as a low tension reducing sleeve for Insulated Conductor (6)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (6)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (7)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (13)
  • For Device Grounding Applications (2)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (6)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (3)
  • For Direct Burial Applications In Earth Or Concrete, Copper (7)
  • For Direct Burial Cables (13)
  • For Direct Burial In Earth And Concrete (11)
  • For Direct Burial In Earth Or Concrete (3)
  • For Direct Burial In Earth Or Concrete, Grounding Applications (7)
  • For Dry Locations (16)
  • For Dry Locations; Insulating and protecting wires and cables (8)
  • For Easy Positioning In Outlet Box - Reduces Stress On Device, Wires And Connection And Fast, Efficient Device Connection (3)
  • For flat applications (1)
  • For Grounding And Bonding Applications (5)
  • For hanging rod (2)
  • For high temperature applications over 105 degree C (1)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (5)
  • For Indoor And Outdoor Use (2)
  • For Indoor Use Only (2)
  • For Indoor Use Only, Copper Or Stranded Aluminum (5)
  • For Joining A Range Of Cable To Copper Clad, Galvanized Steel, And Stainless Steel Ground Rods, Direct Burial Applications In Earth And Concrete (3)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (20)
  • For Joining A Range Of Two Parallel Copper Cables To Rod Or Pipe And Burial In Ground Or Concrete (4)
  • For Joining A Wide Range Of Cable To Equipment Pads Or Bar (3)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (5)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (4)
  • For Joining Cable To Rod Or Pipe, Direct Burial Application (2)
  • For Joining Three Equal Copper Cables To Rod Or Tube, Direct Burial In Earth Or Concrete (2)
  • For MA5 Machine Screw Anchor (1)
  • For Making Tap Or Parallel Copper Connections (3)
  • For quickly connecting or disconnecting a terminal (3)
  • For Range Of Copper And Making Tap Or Parallel Copper Connections (2)
  • For Removing Metal And Can Be Used In Heavier Gauge Metals (33)
  • For Roof Line and Service Entrance Conduit or Ventilation Pipe (3)
  • For securing Contractor, DIY, Landscape Maintenance, recreational loads and more. (1)
  • For Service Entrance Cable And Conduit (5)
  • For Standard Conductor Splice (13)
  • For Suspending Fixtures (2)
  • For use in temporary connections to male disconnects and terminal blocks (2)
  • For use on aluminum conductors (8)
  • For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To Vibration Or Requiring Dependable Electrical Performance (8)
  • For use with applications ranging from standard distribution and control panels, to specialized applications in key industries such as traction, energy, maritime, explosive atmospheres, material handling, etc. (1)
  • For Use With Copper And Aluminum Conductors (5)
  • For use with inline compression connectors (1)
  • For use with non-metallic cable (8)
  • For Used To Couple Threaded Rod For Extended Lengths (3)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (24)
  • For Used To Hang Fixtures Suspended From Chain (2)
  • For Used To Write On Cardboard, Concrete, Lumber (Rough Or Smooth), Metal, Paper And Plastic (2)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • Framing, Electrical, Plumbing and Sheet Metal Applications (6)
  • General (6)
  • General Purpose (57)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • General Purpose;Indoor;Outdoor;Cable Harnessing;Wire Harnessing (5)
  • General Use (2)
  • Grounding and Bonding Applications (9)
  • Grounding Application (3)
  • Grounding Wire (8)
  • Hardware For Lugs (4)
  • Harness Multiple Cables Into a Single Manageable Bundle; Allows Breakouts of Single/Multiple Cables; Provides Abrasion Protection for Wire, Cables, Hoses, and Tubing (4)
  • Harsh Environment (4)
  • Hazardous Area (1)
  • Hazardous Area;Industrial Construction;Residential Construction;Maintenance and Repair Operations;Communications;Irrigation;Commercial Construction;Mining;Wind Power;Solar;Utility (2)
  • Heavy Duty (1)
  • Hollow Walls (9)
  • Home Use;Do-It-Yourself Home Improvements;Automotive;Plumbing;Sporting Equipment;Equipment Identification (1)
  • Ideal solution for bundling in harsh outdoor environments (2)
  • Ind Facilities & Factories - Industrial Facilities/Factories - OtherGeneration - Conventional Energy - Conventional EnergyInd Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketOther IT and Datacom - Other InfrastructuresCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherGeneration - Renewable Energ (1)
  • Ind Facilities & Factories - Mfg. Process Electrification and Control (1)
  • Indoor (23)
  • Indoor/Outdoor (3)
  • Indoor/Outdoor, Assets and Barcoding, Facilities and MRO, Wire and Cable, Networking Component (1)
  • Indoor;Outdoor (8)
  • Indoor;Outdoor;Industrial (3)
  • Industrial (4)
  • Industrial Construction;Residential Construction;Maintenance And Repair Operation;Communication;Automotive And Marine;Irrigation;Commercial Construction;Mining;Appliance And Fixture;Wind Power;Solar;Utility (1)
  • Industrial Spec Grade (2)
  • Industrial;Labeling Wire;Cable and Rounded Surface (2)
  • Insulate Connections Up to 600V. Smooth Bus Bar Irregularities. (1)
  • Insulate Moisture-Seal;Pad Connections Up to 600 V;Indoor;Outdoor (2)
  • Insulate motor stub splices quickly and dependably (1)
  • Insulating or Joining 1 or more aluminum to copper conductors (4)
  • Insulating or Joining 1 or more conductors (38)
  • Insulating or Joining 2 or more conductors (19)
  • insulating wire splices, split bolt connections, and motor leads up to 600V (1)
  • Label Wires and Household Electrical Panel (1)
  • Light Duty Aluminum and Steel Metal to Metal Applications (1)
  • Light Fixtures (2)
  • Low Voltage;Electrical Insulation;Harnessing of Wire/Cable (1)
  • MARINE (2)
  • Marking Wire and Cable (4)
  • Measuring Conduit (1)
  • Metal into Concrete (2)
  • Military Specification No. Mil-I-19166C;UL Recognized Component listing for 200°C (Guide OANZ2;File E17385);CSA Accepted Component 180°C;File LR93411 (1)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (1)
  • Mortar Joints, Poured Concrete, Brick, Concrete Blocks (2)
  • Multi-Purpose (1)
  • NA (2)
  • Non-Galvanized Metal;Steel;Masonry;Wood;Machinery;Motors;Tools;Cabinets;Toolboxes;Steel Bars;Pipelines;Drums;Conduit;Ducts;Furniture and Ideal for Marking Hazard Area (1)
  • Non-Indicating (1)
  • NSI (58)
  • one-piece self drilling anchor designed for use ni hollow gypsum wallboard for light to medium dury loads (2)
  • OSB;Cinder Block;Concrete (5)
  • Other (23)
  • OtherInd Facilities & Factories - Facility: Power Distribution and Control (1)
  • Outdoor (13)
  • Overhead Tension Connection (2)
  • PanTher(TM) LS8E;Cougar(TM) LS9 Hand-Held Thermal Transfer Printers (1)
  • Paper;Food And Beverage;Medical;General Industrial;Mro;Electronics;Print;371 Model (1)
  • Patching;Bundling;Reinforcing;Tabbing;Taping/Splicing Insulation;Capping Pipe;Securing Conduit End;Marking;Labeling;Temporary Repair;Heating;Ventilating and Air Conditioning (1)
  • Pipe Joint;Conduit;Coupling (2)
  • Pipe, Joints, Conduit and Couplings (1)
  • Poured Concrete, Prestressed Concrete, Cinder Block, Brick, Mortar (7)
  • Power Control;Fiber Optic;Electronic Telecommunications;Instrumentation;Automotive (1)
  • Premium (10)
  • Premium Grade (2)
  • Premium Grade;Phase Identification and Marking. (8)
  • Primary Electrical Insulation for Splicing all Solid Dielectric Cables Through 69 kV. (3)
  • Primary Insulation for Splices Up to 600v. Protective Jacketing (3)
  • Professional;Premium Grade (2)
  • Protect shielded phase legs after jacket has been removed in preparation for terminating (7)
  • Protective Jacketing and Harnessing;General Purpose;Indoor/Outdoor;Cable/Wire Harnessing (1)
  • provide strain relief and environmental/mechanical protection for breakouts in multiconductor armored or sheathed cables. (4)
  • Provides Continuous Abrasion Protection for Wires, Cables, Hoses, and Tubing; Highly Flexible Open Weave will not Trap Heat or Humidity; Allows for Use with Irregular Shapes (2)
  • Provides terminating point for a group of wires running in one direction (4)
  • Rail Connections; Grounding and Bonding (2)
  • Residential (1)
  • Residential and commercial wiring jobs (6)
  • Residential or Commercial (1)
  • Rhino 6000 Dynamometer;Industrial (1)
  • Screws, Bolts, General Use (12)
  • Sealing;Holding;Bundling (2)
  • Snaps into a Regular Bushing to make a UL Listed Insulated Bushing (12)
  • Soft Concrete (4)
  • Splicing Cable;Building Stress;Jacketing;Bus Bar;Sealing (1)
  • Splicing Wire (36)
  • Splicing, tapping or terminating conductors in power and grounding electrical connection (28)
  • Stranded Aluminum or Copper Code Conductor (9)
  • Switchboards;Panel Boards;Industrial Control Panels;Motor Control Centers (1)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (3)
  • Terminate "upsized" conductor and/or fine strand conductor into mechanical connectors found in molded case circuit breakers, panel board equipment, and other switchgear. (2)
  • Terminate, Splice, Tap Power Connectors (133)
  • Terminate-Splice-Tap (3)
  • The conical plastic anchor is a light-duty part that can be used in drywall, concrete, and hollow block or brick. (1)
  • They Are a Reliable and Cost Effective Solution for Securing Wire Harnesses in The Automotive, Marine, White Goods, Heavy Equipment and Mass Transit-Rail Markets (1)
  • To Protect and Prevent Wires and Cables from Chafing Against Sharp Edges of Panel Walls and Knockouts. (1)
  • type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire (1)
  • Use with MA7 (1)
  • Use with MA8 (1)
  • Used for Coaxial Cable, Bell Wire, Thermostat Wire, Telephone Wire and Romex(R) (6)
  • Used for hanging, connecting, clamping, and supporting various applications (3)
  • Used to Attach Non Metallic Cable or BX (Armored) Cable, RX Series is used for Romex(R) (1)
  • Used to bundle and secure wire and cable. (2)
  • Used to connect threaded conduit or connector to a threadless opening in a box (2)
  • Used to position the grounding plate on a threaded rod prior to placement of the concrete. (2)
  • Used to Strap or Support Pipe, Ducts & Other Fastening Applications (2)
  • Used with Miniature, Intermediate, and Standard Cables Ties (4)
  • Utility/Ground Grid (14)
  • Wall Plates (3)
  • Wallboard, Plywood, Concrete, Hollow or Grout Filled Block, Brick and Plaster (3)
  • Wire and Cable Labeling (1)
  • Wire Identification (2)
  • Wire Labeling (3)
  • Wire Marking (6)
  • Wire Splice (28)
  • Wire Termination (282)
  • Wire Termination and Insulation (1)
  • Wood (3)
  • Writing Instrument (1)
  • Show More...

• Mounting

  

  • # 10 Mounting Hole (1)
  • .114 Mounting Holes (1)
  • .142 Mounting Holes (1)
  • .225 Mounting Holes (1)
  • 0.28 (1)
  • 0.37 (1)
  • 0.38 (1)
  • 0.39 (1)
  • 0.47 (1)
  • 0.62 (2)
  • 0.63 (1)
  • 1 (5)
  • 1 1/16 (1)
  • 1 1/4 (3)
  • 1 1/8 (3)
  • 1 11/16 (1)
  • 1 7/16 (2)
  • 1 9/16 (1)
  • 1.1 cm Oval Mounting Hole (1)
  • 1.13 (8)
  • 1.25 (4)
  • 1.5 (1)
  • 1.56 (4)
  • 1.63 (1)
  • 1.69 (1)
  • 1/2 Mounting Hole (14)
  • 1/2 Mounting Holes (25)
  • 1/2 Mountng Holes (1)
  • 1/4 (1)
  • 1/4 Mounting Hole (8)
  • 1/4 Mounting Holes (4)
  • 1/4 Mountinng Hole (1)
  • 11/16 (2)
  • 1-1/16 (3)
  • 1-1/2 (1)
  • 1-1/4 (5)
  • 1-1/8 (7)
  • 1-11/16 (1)
  • 1-13/16 (1)
  • 1-3/16 (2)
  • 15/16 (7)
  • 15/32 (3)
  • 1-5/8 (5)
  • 1-7/16 (2)
  • 17/32 (1)
  • 1-9/16 (1)
  • 1932-09-01 (6)
  • 2 Mounting Holes (23)
  • 2-15/16 (1)
  • 2-3/4 (1)
  • 2-5/16 (1)
  • 2-5/8 (1)
  • 3/4 (2)
  • 3/8 (1)
  • 3/8 Mountign Hole (1)
  • 3/8 Mounting Hole (17)
  • 3/8 Mounting Holes (1)
  • 42,828 (1)
  • 5/16 (28)
  • 5/16 Mounting Hole (4)
  • 5/8 (6)
  • 5/8 Mounting Hole (2)
  • 7/16 (6)
  • 7/32 (5)
  • 7/8 (9)
  • 9/16 (4)
  • 9/32 (9)
  • Adhesive (4)
  • Adhesive Tape (9)
  • Adhesive/Screw (1)
  • Beam (3)
  • Bottom Mount (2)
  • Ceiling Grid (1)
  • CHANNEL (11)
  • Clamp (3)
  • DIN 3 (1)
  • DIN RAIL (1)
  • Edge Clip (1)
  • End-Section (Channel Mount) (1)
  • Fir Tree Mount (1)
  • Hammer-in (3)
  • Heavy Cross Section MLT Cable Ties (1)
  • None (60)
  • One screw (1)
  • SCREW (3)
  • Screw or Nail fastening (1)
  • Screw-on (4)
  • Self Adhesive (1)
  • Self Stick (1)
  • Self-Adhesive (7)
  • Side Mount (2)
  • Snap In Mount (2)
  • Snap Lock (2)
  • Stick (1)
  • SURFACE (1)
  • Switch (2)
  • Three screw (1)
  • Top Mount (1)
  • UL (Canada and US) (1)
  • Wooden Stud (8)
  • Yes (3)
  • Show More...

• Die Index

  

  • 10 (11)
  • 1011 (4)
  • 11 (7)
  • 12 (10)
  • 13 (11)
  • 14 (8)
  • 15 (8)
  • 16 (5)
  • 17 (4)
  • 18 (7)
  • 19 (3)
  • 19/470 (1)
  • 20 (9)
  • 22 (5)
  • 24 (6)
  • 27 (1)
  • 296 (2)
  • 297 (1)
  • 298 (2)
  • 299 (2)
  • 300 (2)
  • 348 (1)
  • 38 (1)
  • 39 (1)
  • 40 (2)
  • 41 (1)
  • 43 (1)
  • 435 (2)
  • 44 (1)
  • 45 (1)
  • 467 (1)
  • 472 (1)
  • 473 (1)
  • 49 (8)
  • 7 (11)
  • 8 (12)
  • 9 (2)
  • 936 (1)
  • 997 (9)
  • 997;998 (1)
  • 998 (3)
  • BG OR 5/8 (1)
  • C (3)
  • E or O (1)
  • F or D3 (1)
  • KR (1)
  • O (2)
  • Show More...

• Minimum Conductor Size

  

  • #1 AWG (Stranded) (1)
  • #1/0 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (3)
  • #10 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (Stranded and Solid) (1)
  • #10 AWG (Stranded) (1)
  • #10 AWG (Stranded);#10 AWG (Solid);6 sq.mm (Stranded) (1)
  • #12 AWG (25)
  • #12 AWG (Solid);#14 AWG (Stranded) (1)
  • #14 AWG (30)
  • #14 AWG (Copper Tap Range);#1 AWG (CopperWeld Solid Run Size);#6 AWG (Copper Stranded Run);#3 #7-5D (CopperWeld Stranded Tap Size);#14 AWG (Copper Solid Tap);#1 AWG (CopperWeld Solid Tap Size);#6 AWG (Copper Solid Run Size);#3 #7-5D (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap Range);2/0 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Stranded Run);#5D (CopperWeld Stranded Tap Size);#14 AWG (Copper Solid Tap);2/0 AWG (CopperWeld Solid Tap Size);#4 AWG (Copper Solid Run Size);#4 AWG (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap);#2 AWG (CopperWeld Solid Run Size);#6 AWG (Copper Stranded Run);#14 AWG (Copper Solid Tap);#2 AWG (CopperWeld Solid Tap Size);#6 AWG (Copper Solid Run Size);3#8 AWG (CopperWeld Stranded Run Size) (1)
  • #14 AWG (Copper Tap);#8 AWG (CopperWeld Solid Run Size);#8 AWG (Copper Stranded Run);#14 AWG (Copper Solid Tap);#8 AWG (Copper Solid Run Size) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#10 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#12 AWG (Stranded Equal Main and Tap) (1)
  • #14 AWG (Minimum Tap with Maximum Main);#8 AWG (Solid Equal Main and Tap) (1)
  • #14 AWG (Solid) (1)
  • #14 AWG (Stranded) (9)
  • #14 AWG (Stranded);#12 AWG (Solid) (2)
  • #16 AWG (12)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #18 AWG (6)
  • #2 AWG (3)
  • #2 AWG (Range for Equal Main and Tap-Solid) (2)
  • #2 AWG (Range of Equal Main and Tap-Solid) (1)
  • #2 AWG (Run and Tap-Stranded or Solid) (1)
  • #2 AWG (Stranded) (3)
  • #2 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (4)
  • #20 AWG (1)
  • #20 AWG (Stranded) (1)
  • #22 AWG (9)
  • #22 AWG;#18 AWG (1)
  • #22 AWG;0.34 mm2 (1)
  • #24 AWG (3)
  • #26 AWG (11)
  • #3 AWG (1)
  • #4 AWG (12)
  • #4 AWG (Range for Equal Main and Tap-Solid) (1)
  • #4 AWG (Stranded) (7)
  • #6 AWG (36)
  • #6 AWG (Range for Equal Main and Tap-Solid) (2)
  • #6 AWG (Range of Equal Main and Tap-Solid) (1)
  • #6 AWG (Run and Tap1);16 sq.mm (Run and Tap1);#14 AWG (Tap2 and Tap3);2.5 sq.mm (Tap2 and Tap3) (1)
  • #6 AWG (Stranded Main);#6 AWG (Stranded Tap);#8 AWG (Stranded Main) (1)
  • #6 AWG (Stranded) (18)
  • #8 AWG (6)
  • #8 AWG (Range for Equal Main and Tap);#12 AWG (Minimum Tap with Maximum Main) (1)
  • #8 AWG (Range for Equal Main and Tap-Solid) (1)
  • #8 AWG (Range of Equal Main and Tap-Solid) (2)
  • #8 AWG (Solid) (2)
  • #8 AWG (Stranded) (3)
  • #8 AWG (Stranded);#8 AWG (Solid);10 sq.mm (Stranded) (3)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #10 AWG;(1) #12 AWG (1)
  • (2) #12 AWG (1)
  • (2) #14 AWG (5)
  • (2) #16 AWG (2)
  • (2) #18 AWG (12)
  • (2) #20 AWG (2)
  • (2) #22 AWG (3)
  • (3) #12 AWG (1)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (3)
  • (4) #14 AWG (1)
  • 0.08 mm^2;28 AWG (2)
  • 14 AWG STRANDED (1)
  • 16 AWG (2)
  • 2/0 AWG (Run and Tap-Stranded) (1)
  • 2/0 AWG (Run-Stranded);#8 AWG (Tap-Stranded) (1)
  • 20 AWG (1)
  • 22 AWG (1)
  • 250 kcmil (Main);150 m2 (Main);70 m2 (Tap);1/0 AWG (Stranded-Tap) (1)
  • 250 kcmil (Range for Equal Main and Tap) (1)
  • 250 MCM (6)
  • 26 AWG (5)
  • 3/0 AWG (Run and Tap-Stranded or Solid) (1)
  • 4/0 AWG (1)
  • 4/0 AWG (Run-Stranded);#6 AWG (Tap-Stranded or Solid) (1)
  • 4/0 AWG (Run-Stranded);2/0 AWG (Tap-Stranded) (1)
  • 400 kcmil (Range for Equal Main and Tap) (1)
  • 6/1 AWG (ASCR);2/0 AWG (AAAC);2/0 AWG (AAC) (1)
  • Show More...

• Length

  

  • 0.46 (1)
  • 0.5 in (3)
  • 0.56 INCH (1)
  • 0.6 (1)
  • 0.6 in (2)
  • 0.75 (8)
  • 0.75 in (2)
  • 0.75 in;19.05 mm (1)
  • 0.8 (2)
  • 0.85 in , 21.59 mm (1)
  • 0.94 (1)
  • 0.99 in (1)
  • 0.99 in;25 mm (1)
  • 1 (72)
  • 1 in (25)
  • 1.06 (2)
  • 1.12 in;28.6 mm (1)
  • 1.125 in;28.58 mm (2)
  • 1.16 (1)
  • 1.25 (2)
  • 1.26 in (1)
  • 1.37 (1)
  • 1.37 in (4)
  • 1.375 in;34.9 mm (1)
  • 1.38 (3)
  • 1.38;34.9 mm (2)
  • 1.5 (2)
  • 1.5 m (3)
  • 1.5 Meter (1)
  • 1.6 in (1)
  • 1.75 in;44.45 mm (1)
  • 1.82 (1)
  • 1/2 (27)
  • 1/2 in (23)
  • 1/4 in (1)
  • 10 (5)
  • 10 ft (1)
  • 10 ft;3 m (1)
  • 10.900000000000000 (2)
  • 100 (18)
  • 100 ft (6)
  • 100 ft , 30.48 m (3)
  • 100 ft;30.5 m (1)
  • 100 m (1)
  • 1000 (1)
  • 1000 ft (2)
  • 1000 ft;304.8 m (4)
  • 1000 ft;305 m (1)
  • 102 mm (1)
  • 11.000000000000000 (3)
  • 11.08 in;284.4 mm (2)
  • 11.1 in (1)
  • 11.1 in , 282 mm (1)
  • 11.1 in;282 mm (2)
  • 11.3 (2)
  • 11.400000000000000 (1)
  • 11.5 (2)
  • 11.6 in , 295 mm (2)
  • 11.64 mm (1)
  • 11.75 (1)
  • 11.77 in;299 mm (2)
  • 11.8 (2)
  • 1-1/16 (1)
  • 11/16 in (1)
  • 1-1/16 INCH (2)
  • 1-1/2 (54)
  • 1-1/2 in (7)
  • 1-1/2 INCH (1)
  • 1-1/4 (53)
  • 1-1/4 in (17)
  • 1-1/8 (4)
  • 1-1/8 in (3)
  • 11-1/2 ft (2)
  • 12 (5)
  • 12 ft (2)
  • 12.0 in , 304.8 mm (1)
  • 12-1/2 in (3)
  • 13.4 in;340 mm (3)
  • 13.5 in , 343 mm (2)
  • 13.500000000000000 (2)
  • 1-3/4 (3)
  • 1-3/4 in (1)
  • 1-3/8 in (3)
  • 1300 ft (1)
  • 14 (1)
  • 14 in , 357 mm (1)
  • 14.2 in , 360 mm (1)
  • 14.2 in , 361 mm (1)
  • 14.2 in;360.5 mm (2)
  • 14.200000000000000 (3)
  • 14.284 in;362.81 mm (1)
  • 14.287 in;362.9 mm (2)
  • 14.3 (3)
  • 14.49 (1)
  • 14.570000000000000 (1)
  • 14.6 in;371 mm (2)
  • 14.655 in;372.24 mm (2)
  • 14.9 (2)
  • 14.900000000000000 (1)
  • 15 ft;4.6 m (1)
  • 15.1 (3)
  • 15.1 in;384 mm (1)
  • 1-5/16 INCH (1)
  • 1-5/8 (6)
  • 1-5/8 INCH (2)
  • 1500 ft (2)
  • 17.611 in;447.32 mm (1)
  • 1-7/16 in (1)
  • 1-7/8 in (2)
  • 18 Foot (1)
  • 18 ft (1)
  • 18 in;457 mm (2)
  • 18.000000000000000 (1)
  • 180 in (1)
  • 1-9/16 (1)
  • 2 (42)
  • 2 in (25)
  • 2.390 in (1)
  • 2.5 in (2)
  • 20.5 in , 520 mm (1)
  • 200 (7)
  • 2-1/2 (15)
  • 2-1/2 in (3)
  • 2-1/4 (4)
  • 2-1/4 in (2)
  • 22 ft;6.7056 m (1)
  • 22.2 (1)
  • 23.4 (1)
  • 23.611 in;599.72 mm (1)
  • 23.946 in;608.22 mm (1)
  • 2-3/4 (3)
  • 24 in , 610 mm (1)
  • 24 in;610 mm (1)
  • 24.3 in;617 mm (1)
  • 24.900000000000000 (1)
  • 25 (3)
  • 25 ft (Tape);3.5 in;88.9 mm (1)
  • 25 ft (Tape);6.5 in;165.1 mm (1)
  • 25.250000000000000 (1)
  • 27 (1)
  • 3 (14)
  • 3 in (13)
  • 3.5 (1)
  • 3.6 in , 92 mm (2)
  • 3.600000000000000 (2)
  • 3.62 in;91.95 mm (2)
  • 3.94 in;100.08 mm (2)
  • 3/32 in (1)
  • 3/4 (37)
  • 3/4 in (12)
  • 3/8 (4)
  • 3/8 in (5)
  • 30 (4)
  • 30 ft;9 m (1)
  • 30 ft;9.1 m (5)
  • 30.34 in;770.61 mm (1)
  • 30.7 (2)
  • 3000 ft (2)
  • 3-1/2 (3)
  • 3-1/4 (2)
  • 3-1/4 in (1)
  • 3-3/4 (2)
  • 36 yd;32.9184 m (2)
  • 36.376 in;923.37 mm (1)
  • 39.3 (1)
  • 4 (18)
  • 4 ft (15)
  • 4 ft;1.2 m (3)
  • 4 in (2)
  • 4,500 (1)
  • 4.1 in (1)
  • 4.1 in;104 mm (1)
  • 4.5 (4)
  • 400 (2)
  • 4-1/2 (3)
  • 4-1/2 in;0.1 m (1)
  • 44 ft;13.4112 m (1)
  • 4500 (1)
  • 48 in;121.9 mm (5)
  • 5 (9)
  • 5 in (2)
  • 5.4 in , 137 mm (2)
  • 5.400000000000000 (2)
  • 5.5 m (2)
  • 5.51 in;140 mm (2)
  • 5.6 in (1)
  • 5/16 (1)
  • 5/8 in (1)
  • 50 (1)
  • 50 ft , 15.24 m (1)
  • 50 yd (1)
  • 50 yd;45.7 m (1)
  • 5-1/2 in (5)
  • 55 m;60 yd (2)
  • 55 yd (1)
  • 6 (3)
  • 6 in , 152 mm (1)
  • 6 in;15.2 mm (1)
  • 6 INCH (1)
  • 6.1 (4)
  • 6.1 in (2)
  • 6.380000000000000 (1)
  • 6.5 (1)
  • 60 (22)
  • 60 ft (7)
  • 60 ft;18.288 m (1)
  • 60 ft;18.3 m (1)
  • 60 in (1)
  • 60 yd (2)
  • 609.9 m;2000 ft (1)
  • 66 (11)
  • 66 ft (7)
  • 66 ft;20.1 m (9)
  • 66 ft;20.1168 m (4)
  • 7 (2)
  • 7.2 in , 183 mm (2)
  • 7.200000000000000 (3)
  • 7.31 in;185.67 mm (2)
  • 7.31 in;186 mm (1)
  • 7.4 (7)
  • 7.435 in;188.85 mm (2)
  • 7.5 in (2)
  • 7.6 in;193 mm (3)
  • 7.8 in , 198 mm (4)
  • 7.9 (2)
  • 7.990000000000000 (1)
  • 7/16 (2)
  • 7/16 in (1)
  • 7/8 (3)
  • 7/8 in (1)
  • 72 (1)
  • 72513 (5)
  • 75 (2)
  • 8 (11)
  • 8 ft;2.4 m (1)
  • 8 in (2)
  • 8 in , 202 mm (1)
  • 8.000000000000000 (1)
  • 8.1 in;205.70 mm (2)
  • 8.2 in , 208 mm (2)
  • 8.350000000000000 (1)
  • 8.4 in (1)
  • 8.46 in;215 mm (2)
  • 80 in (1)
  • 82.5 ft (1)
  • 9 (3)
  • 9 in;22.9 mm (2)
  • 9/16 in (2)
  • 96 in;2.43 m (1)
  • NA (10)
  • Show More...

• Tensile Strength

  

  • 10 lb (1)
  • 11 lb/in (1)
  • 11 pounds , 50 newtons (1)
  • 11 pounds , 80 newtons (1)
  • 12 lb/in (1)
  • 120 (8)
  • 120 lb (1)
  • 120 lb/530 N (7)
  • 120 lb/534 N (4)
  • 120 pounds , 534 newtons (3)
  • 120;530 (1)
  • 120;534 (5)
  • 1250 (1)
  • 1250 lb (1)
  • 14 lb/in (1)
  • 140 (1)
  • 144 (2)
  • 1475 (1)
  • 15 (10)
  • 15 lb (1)
  • 1500 psi (2)
  • 17 (10)
  • 17 lb/in (17)
  • 175 (1)
  • 175 lb/778 N (2)
  • 175 lb;800 Nm;79.379 kg (1)
  • 18 (4)
  • 18 lb/80 N (4)
  • 18 lb;8.165 kg (3)
  • 18 lb;80 Nm;8.165 kg (1)
  • 18 pounds , 80 newtons (2)
  • 18;80 (4)
  • 180 lb/in (1)
  • 1800 (1)
  • 19.8 (10)
  • 20 (2)
  • 20 lb/in (4)
  • 200 (2)
  • 2200 psi;15.0 MPa (1)
  • 2400 psi (21)
  • 25 (1)
  • 25 lb/in (1)
  • 250 (4)
  • 250 pounds , 11112 newtons (1)
  • 250 pounds , 1112 newtons (2)
  • 250 psi;1.72 MPa (1)
  • 250;1112 (1)
  • 2500 lb (3)
  • 30 (1)
  • 30 lb (1)
  • 30 lb/135 N (5)
  • 30 pounds , 135 newtons (1)
  • 300 (1)
  • 333.6 (3)
  • 35 (1)
  • 35 lb/in;15000 psi (1)
  • 40 (8)
  • 40 lb (1)
  • 40 lb/178 N (8)
  • 40 pounds , 178 newtons (2)
  • 40 pounds , 180 newtons (1)
  • 40;178 (4)
  • 40;180 (2)
  • 400 (1)
  • 42 lb/in (4)
  • 4400 psi (4)
  • 450 (1)
  • 450 pounds , 2002 newtons (2)
  • 47.3 N/cm;432 oz/in (1)
  • 50 (24)
  • 50 lb (1)
  • 50 lb/220 N (8)
  • 50 lb/222 N (4)
  • 50 lb;220 Nm;22.68 kg (7)
  • 50 pounds , 222 newtons (9)
  • 50;222 (6)
  • 580 (1)
  • 7 (1)
  • 7.5 lb/in (3)
  • 74 (2)
  • 90;400 (1)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (4)
  • #1 AWG (Copper Tap Range);#1 AWG (Copper Stranded Run);#1 AWG (Copper Solid Tap);#1 AWG (Copper Solid Run Size) (1)
  • #1 AWG (Copper Tap Range);#1 AWG (Copper Stranded Run);#1 AWG (Copper Solid Tap);#1 AWG (Copper Solid Run Size);#2 A AWG (CopperWeld Stranded Tap Size);#2 A AWG (CopperWeld Stranded Run Size) (1)
  • #1 AWG (Solid);2/0 AWG (Stranded) (1)
  • #1 AWG (Solid);4/0 AWG (Stranded) (1)
  • #1 AWG (Stranded) (1)
  • #1 AWG (Stranded);#2 AWG (Solid);35 sq.mm (Stranded) (3)
  • #1/0 AWG (2)
  • #1/0 AWG (Stranded) (2)
  • #10 AWG (24)
  • #10 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #10 AWG (Solid Equal Main and Tap) (1)
  • #10 AWG (Solid);#2 AWG (Stranded) (2)
  • #10 AWG (Stranded);#10 AWG (Solid) (1)
  • #10 AWG/4 sq.mm (6)
  • #10 AWG;6.00 mm2 (1)
  • #12 AWG (5)
  • #12 AWG/2.5 sq.mm (3)
  • #14 AWG (18)
  • #14 AWG/1.5 sq.mm (1)
  • #16 AWG/1.5 sq.mm (2)
  • #18 AWG (4)
  • #19 AWG (1)
  • #2 AWG (17)
  • #2 AWG (ACSR);#1 and #2 AWG (Stranded) (2)
  • #2 AWG (ASCR );#1 and #2 AWG (Stranded );#1 AWG (Solid ) (1)
  • #2 AWG (Copper Tap);#2 AWG (Copper Stranded Run);#4 AWG (CopperWeld Stranded Tap Size);#2 AWG (Copper Solid Tap);#2 AWG (Copper Solid Run Size);#6D AWG (CopperWeld Stranded Run Size) (1)
  • #2 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #2 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #2 AWG (Run and Tap1);25 sq.mm (Run and Tap1);#8 AWG (Tap2 and Tap3);6 sq.mm (Tap2 and Tap3) (1)
  • #2 AWG (Run and Tap-Stranded or Solid) (1)
  • #2 AWG (Run);35 sq.mm (Run);#4-#2 AWG (Tap);25-35 sq.mm (Tap);#1 AWG (Run);35 sq.mm (Run);#4-#3 AWG (Tap);25 sq.mm (Tap);1/0 AWG (Run);50 sq.mm (Run);#12-#4 AWG (Tap);4-25 sq.mm (Tap) (1)
  • #2 AWG (Solid);#2/0 AWG (Stranded) (1)
  • #2 AWG (Stranded) (7)
  • #2/0 AWG (1)
  • #2/0 AWG (Stranded) (1)
  • #22 AWG (1)
  • #3 AWG (Range for Equal Main and Tap-Solid);#16 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #3 AWG (Stranded);#2 AWG (Solid) (3)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #4 AWG (13)
  • #4 AWG (ACSR);#4 AWG (Stranded);#2 AWG (Solid) (2)
  • #4 AWG (ASCR);#2 AWG (Solid ) (1)
  • #4 AWG (Copper Tap);#4 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Stranded Run);#4 AWG (Copper Solid Tap);#4 AWG (CopperWeld Solid Run Size);#4 AWG (Copper Solid Run Size);3#10-8D AWG (CopperWeld Stranded Run Size) (1)
  • #4 AWG (Range for Equal Main and Tap-Solid);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #4 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #4 AWG (Run and Tap);25 sq.mm (Run and Tap);#3 AWG (Run);25 sq.mm (Run);#5 AWG (Tap);16 sq.mm (Tap);#2 AWG (Run);35 sq.mm (Run);#12-#6 AWG (Tap);4-16 sq.mm (Tap) (1)
  • #4 AWG (Stranded Main);#4 AWG (Stranded Main) (1)
  • #4 AWG (Stranded) (4)
  • #4 AWG (Stranded);#14 AWG (Solid) (1)
  • #4/0 AWG (1)
  • #5 AWG (Stranded);#4 AWG (Solid);16 sq.mm (Stranded) (1)
  • #6 AWG (28)
  • #6 AWG (ASCR );#4 AWG (Solid ) (1)
  • #6 AWG (Range for Equal Main and Tap);#4 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • #6 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #6 AWG (Solid Equal Main and Tap) (1)
  • #6 AWG (Solid);#4 AWG (Stranded) (1)
  • #6 AWG (Stranded) (6)
  • #8 AWG (12)
  • #8 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #8 AWG (Solid Equal Main and Tap) (1)
  • #8 AWG (Stranded) (2)
  • #8 AWG/6 sq.mm (1)
  • #8 AWG;#10 AWG (1)
  • (1) #10 AWG;(2) #14 AWG;(1) #16 AWG (1)
  • (1) #8 AWG;(3) #10 AWG (1)
  • (2) #10 AWG;(1) #12 AWG (2)
  • (2) #12 AWG (1)
  • (2) #14 AWG (2)
  • (2) #16 AWG (1)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (7)
  • (3) #16 AWG (4)
  • (4) #10 AWG (1)
  • (4) #12 AWG (4)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (17)
  • 1/0 AWG (ACSR);1/0 AWG (Stranded) (1)
  • 1/0 AWG (ASCR );1/0 AWG (Stranded );#1 AWG (Solid ) (1)
  • 1/0 AWG (ASCR);1/0 AWG (Stranded);2/0 AWG (Compact Conductor-Stranded) (1)
  • 1/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 1/0 AWG (Run and Tap-Stranded) (1)
  • 1/0 AWG (Run-Stranded);#2 AWG (Tap-Stranded) (1)
  • 1/0 AWG (Stranded) (5)
  • 1/0 AWG (Stranded);#4 AWG (Solid) (1)
  • 1/0 AWG (Stranded);1/0 AWG (Solid);50 sq.mm (Stranded) (1)
  • 10 AWG (1)
  • 12 AWG (5)
  • 12 AWG STRANDED (1)
  • 14 AWG (2)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (16)
  • 2/0 AWG (ASCR);2/0 AWG (Stranded);3/0 AWG (Compact Conductor-Stranded) (1)
  • 2/0 AWG (Range for Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 2/0 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 2/0 AWG (Stranded ) (1)
  • 2/0 AWG (Stranded) (5)
  • 2/0 AWG (Stranded);2/0 AWG (Solid);50 sq.mm (Stranded) (3)
  • 2/0 to 4/0 AWG (Solid);1/0 AWG to 250 kcmil (Stranded) (1)
  • 250 kcmil (9)
  • 250 kcmil (Stranded) (2)
  • 250 kcmil to #1AWG (Range of Equal Main and Tap);#8 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 250 MCM (12)
  • 250 MCM (Range of Equal Main and Tap-Stranded);1/0 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 3/0 AWG (11)
  • 3/0 AWG (Run-Stranded);#2 AWG (Tap-Stranded or Solid) (1)
  • 3/0 AWG (Run-Stranded);1/0 AWG (Tap-Stranded) (1)
  • 3/0 AWG (Stranded) (1)
  • 300 kcmil (2)
  • 300 MCM (1)
  • 350 kcmil (8)
  • 350 kcmil (Range for Equal Main and Tap);1/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 350 kcmil (Stranded) (1)
  • 350 MCM (6)
  • 4/0 AWG (6)
  • 4/0 AWG (ASCR);4/0 AWG (Stranded) (1)
  • 4/0 AWG (Range for Equal Main and Tap-Stranded);#6 AWG (Minimum Tap with Maximum Main-Solid) (1)
  • 4/0 AWG (Run and Tap-Stranded or Solid) (1)
  • 500 kcmil (4)
  • 500 kcmil (Main);240 m2 (Main);120 m2 (Tap);250 kcmil (Tap) (1)
  • 500 kcmil (Range for Equal Main and Tap);2/0 AWG (Minimum Tap with Maximum Main-Stranded) (1)
  • 500 kcmil (Stranded) (1)
  • 500 MCM (9)
  • 600 kcmil (4)
  • 600 kcmil (Stranded) (1)
  • 600 MCM (3)
  • 750 MCM (2)
  • 8 AWG (2)
  • Standard Conductor-Main:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Standard Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), #2, #4, #6 AWG (Solid);Campact Conductor-Main:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:#3, #4, #6 AWG (ACSR), #2, #3, #4, #6 AWG (Stranded), #1, #2, #3, #4 AWG (Solid);Standard Conductor-Tap A:#8, #10, #12, #14 AWG (Stranded), #8, #10, #12, #14 AWG (Solid) (1)
  • Standard Conductor-Main:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded), 3/0, 2/0, 1/0, #1 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0, 1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:1/0, #1, #2, #3, #4 (ASCR), 2/0, 1/0, #1, #2, #3 (Stranded), #1, #2 (Solid);Standard Conductor-Tap A:#8, #10 (Stranded), #6, #8, #10 (Solid);Standard Conductor-Tap B:#12, #14 (Stranded), #12, #14 (Solid) (1)
  • Standard Conductor-Main:2/0, 1/0 AWG (ACSR), 3/0, 2/0 AWG (Stranded), 4/0, 3/0 AWG (Solid);Standard Conductor-Tap:#2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded), 1/0, #1, #2, #4, #6 AWG (Solid);Campact Conductor-Main:2/0, 1/0, #1, #2 AWG (ACSR), 2/0,1/0, #1, #2 AWG (Stranded);Campact Conductor-Tap:#1, #2, #4, #6 AWG (ACSR), #1, #2, #3, #4, #6 AWG (Stranded) (1)
  • Standard Conductor-Main:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Main:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded);Campact Conductor-Tap:3/0, 2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:2/0, 1/0, #1 AWG (ACSR), 2/0, 1/0 AWG (Stranded), 3/0, 2/0 AWG (Solid);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:2/0, 1/0 AWG (ACSR), 3/0, 2/0, 1/0 AWG (Stranded) (1)
  • Standard Conductor-Main:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Standard Conductor-Tap:4/0, 3/0 AWG (ACSR), 4/0, 3/0 AWG (Stranded);Campact Conductor-Main:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded);Campact Conductor-Tap:26618/1 kcmil, 4/0, 3/0 AWG (ACSR), 266 kcmil, 250 kcmil, 4/0 AWG (Stranded) (1)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (4)
  • # 2 AWG (STR) (7)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (6)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (4)
  • #12 AWG (1)
  • #12 to #6 AWG (2)
  • #16 to 10 AWG (1)
  • #2 to 4/0 AWG (2)
  • #3/0 AWG to 400 kcmil (1)
  • #4 AWG (1)
  • #6 to #2 AWG (ASCR);#6 to #2 AWG (AAAC);#6 STR to #1 Solid AWG (1)
  • #8 to 1/0 AWG (2)
  • (2) 14 AWG, (3) 14 AWG, (2) 12 AWG, (3) 12 AWG (1)
  • (2) 14 AWG/(2) 12 AWG (2)
  • (2) 14 To (3) 10 AWG (3)
  • (3) 2 AWG Service Entrance Utility Cable (1)
  • (3) 6 AWG SERVICE ENTRANCE UTILITY CABLE (1)
  • 0.0625 AWG (2)
  • 0.31 (1)
  • 0.375 To 0.706 In OD (1)
  • 0.38 (1)
  • 0.420 To 0.700 In OD (1)
  • 0.62 (1)
  • 1 AWG (9)
  • 1 in (1)
  • 1 In Conduit/Cable (1)
  • 1 INCH (1)
  • 1/0 AWG (11)
  • 1/0 AWG (STR) (6)
  • 1/0 AWG Stranded (2)
  • 1/0 AWG-250 MCM (2)
  • 1/0 to 4 AWG (ASCR);1/0 to 4 AWG (AAAC);2/0 STR to 2 Solid AWG (1)
  • 1/2 in (1)
  • 1/4 in (2)
  • 1/8 in (3)
  • 1-1/2 INCH (2)
  • 12 - 10 (1)
  • 12 AWG, 14 AWG (3)
  • 14 to 2, 12 to 2 (4)
  • 14 to 3, 12 to 3, 10 to 3 (2)
  • 14/2 AWG And 14/3 AWG Armored Cable, 14/2 AWG And 14/3 AWG Metal Clad Cable, 14/2 AWG Through 10/3 AWG Non-Metallic Sheathed Cable, 14/2 AWG And 12/2 AWG Underground Feeder Cable (1)
  • 14/2 AWG Through 10/3 AWG Armored Cable, 14/2 AWG Through 10/3 AWG Metal Clad Cable, 12/3 AWG Through 10/3 AWG Non-Metallic Sheathed Cable, 14/3 AWG And 12/3 AWG Underground Feeder Cable (1)
  • 14/2 AWG;10/3 AWG;12/2 AWG;14/3 AWG (1)
  • 14/2 to 8/3 With Ground (1)
  • 14/3 To 8/3 (1)
  • 14-10 AWG (1)
  • 14-2 AWG (1)
  • 14-2/0 AWG (1)
  • 14-3, 12-3, 10-3 (1)
  • 2 AWG (14)
  • 2 AWG SER Cable And 3/4 IN EMT Conduit (1)
  • 2 Conductor (#12 and #14) (1)
  • 2/0 AWG (11)
  • 2/0 AWG (STR) (5)
  • 2/0 AWG Stranded (1)
  • 2/3 BX, 1" EMT, 1" Greenfield, 2/3 SER (1)
  • 2-4/0 AWG (1)
  • 250 kcmil (7)
  • 250 KCMIL Stranded (1)
  • 250 MCM (STR) (5)
  • 250 to 750 kcmil (1)
  • 250-500 MCM (1)
  • 3/0 AWG (9)
  • 3/0 AWG (STR) (6)
  • 3/0-4 AWG (1)
  • 3/16 in (2)
  • 3/4 in (1)
  • 3/8 in (3)
  • 300 kcmil (1)
  • 300 MCM (STR) (2)
  • 35 (1)
  • 350 kcmil (7)
  • 350 KCMIL Stranded (1)
  • 350 MCM (STR) (5)
  • 4 AWG (9)
  • 4 AWG STRANDED (1)
  • 4/0 AWG (11)
  • 4/0 AWG (STR) (5)
  • 4/0 AWG SER Cable And 4/0 AWG SEU Cable (1)
  • 4/0 AWG Stranded (2)
  • 4/0 S.E. Greenfield, Large BX, NM Cable, Tubing (1)
  • 4/0 to 2/0 AWG (ASCR);4/0 to 2/0 AWG (AAAC);4/0 to 2/0 STR AWG (1)
  • 4/0-14 AWG (2)
  • 400 AWG (1)
  • 400 kcmil (2)
  • 400 MCM (STR) (2)
  • 500 kcmil (4)
  • 500 KCMIL Stranded (2)
  • 500 MCM (STR) (6)
  • 6 AWG (11)
  • 6 AWG And 8 AWG SEU Cable (1)
  • 6 AWG Stranded (1)
  • 600 kcmil (6)
  • 600 MCM (STR) (2)
  • 6-1/0 AWG (1)
  • 700 kcmil (2)
  • 750 kcmil (2)
  • 750 KCMIL Stranded (1)
  • 750 MCM (STR) (3)
  • 8 - 2 (1)
  • 8 AWG (7)
  • 8/3 AWG;6/3 AWG;14/2 AWG;8/2 AWG (1)
  • 8-1/0 AWG (1)
  • 8-2 AWG (2)
  • 8-2/0 AWG (1)
  • NA (12)
  • Show More...

• Wire Size

  

  • #10 (22)
  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #12 AWG - #20 AWG Solid, #12 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand) Stranded, #14 AWG - #18 AWG (19 Strand Or Less) Stranded (Tin Bonded) (6)
  • #12 AWG - #20 AWG Solid, #14 AWG - #16 AWG (19 Strand Or Less) #18 AWG (7 Strand Or Less) Stranded, #12 AWG - #14 AWG (19 Strand Or Less) #16 AWG (26 Strand Or Less) 318 AWG (16 Strand Or Less) Stranded (Tin Bonded) (3)
  • #14 (18)
  • #18 (4)
  • #20-6 AWG (1)
  • #24-16 AWG (1)
  • #24-8 AWG (2)
  • #26-10 AWG (11)
  • #26-12 AWG (1)
  • #26-8 AWG (1)
  • #4 to 4/0 AWG (Main);#14 to #4 AWG (Tap) (1)
  • (1) 1000-250 MCM(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(LINE) - (1) 2/0-14 AWG(LOAD) (1)
  • (1) 2/0-14 AWG(Line) - (4) 4-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 2-14 AWG(Line) - (1) 2-14 AWG(Load) (1)
  • (1) 250 MCM-6 AWGG(Line) - (1) 250 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (1) 350 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (1) 500 MCM-4 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (4) 4/0-6 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) #26-12 AWG (1)
  • (2) 2/0-14 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (2) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 2-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (2) 22 AWG - (2) 16 AWG (1)
  • (2) 350 MCM-6 AWG(Line) - (2) 350 MCM-6 AWG(Load) (1)
  • (2) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(Line) - (2) 500 MCM-4 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(LINE) - (4) 4/0-6 AWG(LOAD) (1)
  • (2) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (3) #26-12 AWG (4)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 0.125 in Dia x 2 in W (1)
  • 0.125 in Dia x 7 ft L (1)
  • 0.187 in Dia x 1 in W (4)
  • 0.187 in Dia x 1.75 in W (2)
  • 0.187 in Dia x 2 in W (1)
  • 0.25 in Dia x 1 in W (1)
  • 0.25 in Dia x 1.75 in W (2)
  • 0.25 in Dia x 2 in W (1)
  • 0.375 in Dia x 1 in W (1)
  • 0.375 in Dia x 1.75 in W (1)
  • 0.375 in Dia x 2 in W (1)
  • 0.375 in Dia x 7 ft L (1)
  • 0.38 (3)
  • 0.5 in Dia x 1 in W (1)
  • 1 SOL - 2/0 STR (1)
  • 1 SOL - 4/0 STR (1)
  • 1.27 (1)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (10)
  • 1/0-8 AWG (1)
  • 10 (1)
  • 10 AWG (1)
  • 10 SOL - 2 STR (1)
  • 10 SOL - 6 SOL (1)
  • 10 SOL-4 STR (1)
  • 10 STR - 6 STR (1)
  • 11 (1)
  • 12 (4)
  • 12 - 10 AWG (1)
  • 12 - 18 AWG Solid, 12 - 14 AWG Stranded, 12 - 14, 16, 18 AWG Stranded Tin-Bonded (3)
  • 12 AWG (2)
  • 12 TO 6 AWG (1)
  • 12-10 AWG (40)
  • 12-14 AWG (2)
  • 14 (1)
  • 14 AWG (1)
  • 14 STR - 8 STR (1)
  • 14-8 AWG (1)
  • 16 (2)
  • 16 - 14 AWG (1)
  • 16 AWG (2)
  • 16 STR - 8 STR (1)
  • 16-14 AWG (14)
  • 18 AWG (1)
  • 18 TO 6 AWG (CE), 18 TO 4 AWG (COPPER) (1)
  • 18-10 AWG (1)
  • 18-14 AWG (23)
  • 18-17 AWG (1)
  • 1mm2 (2)
  • 2 AWG (2)
  • 2 SOL - 2 STR (1)
  • 2 SOL - 2/0 STR (2)
  • 2 SOL - 3/0 STR (1)
  • 2/0 STR - 350 MCM (1)
  • 2/0-14 AWG (5)
  • 20 (1)
  • 20 AWG (1)
  • 22 - 10 (6)
  • 22 - 12 (2)
  • 22 - 18 (1)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 22-10 (1)
  • 22-10 AWG (30 Amp) - 18-14 AWG (20 Amp) (1)
  • 22-10, 22-18 (1)
  • 22-12 AWG (20 Amp) - 20-18 AWG (10 Amp) (1)
  • 22-14 AWG (1)
  • 22-16 AWG (22)
  • 22-18 AWG (1)
  • 22-18, 16-14, 12-10 AWG (1)
  • 24 (1)
  • 250 - 500 MCM (1)
  • 250 MCM-6 AWG (13)
  • 3/0 SOL - 4/0 STR (1)
  • 3/0 STR - 350 MCM (1)
  • 3/0 STR - 500 MCM (1)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 4 AWG (3)
  • 4 SOL - 1/0 STR (2)
  • 4 STR - 2 STR (1)
  • 4 STR - 3/0 STR (1)
  • 4 to 14 AWG (1)
  • 4/0 STR - 350 MCM (1)
  • 4-14 AWG (9)
  • 500 MCM-4 AWG (12)
  • 6 AWG (7)
  • 6 SOL - 1/0 STR (2)
  • 6 SOL - 2 SOL (1)
  • 6 SOL - 2 STR (1)
  • 6 STR - 2/0 SOL (1)
  • 6 STR - 4/0 SOL (1)
  • 600 MCM-6 AWG (5)
  • 7 (1)
  • 750-250 MCM (7)
  • 78181040872 (1)
  • 8 AWG (6)
  • 8 SOL - 1/0 STR (1)
  • 8 SOL - 2 STR (1)
  • 8 SOL - 4 SOL (1)
  • Main .204 to .162 in , Tap .128 to .204 in (1)
  • Main 2 ACSR 1-2 STR - Tap 2 ACSR 1-2 STR (1)
  • Main: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or #2 to #6 SOL AWG (1)
  • Main: #3 to #6 ACSR or #2 to #6 STR or #1 to #4 SOL AWG , Tap: #8 to #14 STR or #8 to #14 SOL AWGp: #8 to #14 STR AWG , #8 to #14 SOL AWG (1)
  • Main: 1/0 to #2 ACSR or 2/0 to #1 STR AWG , Tap: 1/0 to #2 ACSR or 2/0 to #2 STR AWG (1)
  • Main: 1/0 to #3 ACSR or 2/0 to #2 STR or 3/0 to #1 SOL AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 1/0 to #4 ACSR or 2/0 to #3 STR or 2/0 to #2 SOL AWG , Tap A: #8 to #10 STR or #6 to #10 SOL AWG , Tap B: #12 to #14 STR or #12 to #14 SOL AWG (1)
  • Main: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 4/0 to 2/0 SOL AWG , Tap: 2/0 to #1 ACSR or 3/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Main: 2/0 to 1/0 ACSR or 3/0 to 2/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (1)
  • Main: 4/0 to 3/0 ACSR or 4/0 STR AWG , Tap: #2 to #6 ACSR or #1 to #6 STR or 1/0 to #6 SOL AWG (2)
  • Main: 4/0 to 3/0 ACSR or 4/0 to 3/0 STR AWG , Tap: 2/0 to #1 ACSR or 2/0 to 1/0 STR or 3/0 to 2/0 SOL AWG (1)
  • Show More...

• Weight

  

  • 0.0001 lb (1)
  • 0.0003 lb (2)
  • 0.0004 lb (1)
  • 0.0006 lb (4)
  • 0.001 lb (2)
  • 0.0018 lb (1)
  • 0.002 lb (2)
  • 0.0025 lb (3)
  • 0.003 lb (8)
  • 0.0033 lb (1)
  • 0.0034 lb (1)
  • 0.0037 lb (3)
  • 0.004 lb (8)
  • 0.005 lb (12)
  • 0.0056 lb (2)
  • 0.006 lb (8)
  • 0.0062 lb (2)
  • 0.008 lb (1)
  • 0.01 lb (102)
  • 0.01 LB (Each) (2)
  • 0.01 lb/EA (14)
  • 0.011 lb (2)
  • 0.02 lb (36)
  • 0.02 lb/EA (22)
  • 0.022 lb/EA (1)
  • 0.03 lb (22)
  • 0.03 LB (Each) (1)
  • 0.03 lb/EA (17)
  • 0.033 lb/EA (1)
  • 0.0344 lb/EA (1)
  • 0.04 lb (11)
  • 0.04 lb/EA (14)
  • 0.05 lb (12)
  • 0.05 lb/EA (11)
  • 0.052 lb/EA (1)
  • 0.055 lb/EA (1)
  • 0.06 lb (7)
  • 0.06 lb/EA (14)
  • 0.07 lb (13)
  • 0.07 lb/EA (6)
  • 0.073 lb/EA (1)
  • 0.08 lb (7)
  • 0.08 lb/EA (16)
  • 0.085 lb/EA (1)
  • 0.09 lb (10)
  • 0.09 lb/EA (12)
  • 0.1 lb (6)
  • 0.1 lb/EA (8)
  • 0.10 lb/EA (2)
  • 0.11 lb (9)
  • 0.11 lb/EA (2)
  • 0.116 lb/EA (1)
  • 0.12 lb (4)
  • 0.12 lb/EA (8)
  • 0.123 lb (1)
  • 0.13 lb (6)
  • 0.13 lb/EA (16)
  • 0.14 lb (2)
  • 0.14 lb/EA (6)
  • 0.15 lb (7)
  • 0.15 lb/EA (4)
  • 0.16 lb (4)
  • 0.16 lb/EA (4)
  • 0.17 lb (3)
  • 0.17 lb/EA (5)
  • 0.18 lb (4)
  • 0.19 lb (5)
  • 0.19 lb/EA (9)
  • 0.2 lb (7)
  • 0.2 lb/EA (1)
  • 0.21 lb (6)
  • 0.21 lb/EA (2)
  • 0.22 lb (13)
  • 0.22 lb/EA (2)
  • 0.23 lb (2)
  • 0.24 lb (3)
  • 0.2400 lb/EA (1)
  • 0.25 lb (7)
  • 0.25 lb/EA (4)
  • 0.26 lb (5)
  • 0.26 lb/EA (4)
  • 0.27 lb (3)
  • 0.28 lb (2)
  • 0.28 lb/EA (4)
  • 0.29 lb (1)
  • 0.3 lb (3)
  • 0.3 lb/EA (3)
  • 0.30 lb/EA (1)
  • 0.31 lb (1)
  • 0.31 lb/EA (3)
  • 0.32 lb (3)
  • 0.325 lb/EA (1)
  • 0.34 lb (4)
  • 0.35 lb (3)
  • 0.35 lb/EA (3)
  • 0.36 lb (4)
  • 0.37 lb (4)
  • 0.37 lb/EA (2)
  • 0.38 lb (5)
  • 0.38 lb/EA (2)
  • 0.4 lb (3)
  • 0.41 lb (3)
  • 0.41 lb/EA (2)
  • 0.44 lb (4)
  • 0.45 lb (3)
  • 0.45 lb/EA (3)
  • 0.46 lb (4)
  • 0.46 lb/EA (1)
  • 0.47 lb (1)
  • 0.48 lb (2)
  • 0.49 lb (3)
  • 0.5 lb (5)
  • 0.50 lb;0.23 kg (1)
  • 0.51 lb (1)
  • 0.53 lb/EA (2)
  • 0.54 lb (1)
  • 0.55 lb (2)
  • 0.55 lb/EA (2)
  • 0.56 lb (3)
  • 0.58 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.6 lb (3)
  • 0.61 lb (2)
  • 0.62 lb (2)
  • 0.62 lb/EA (2)
  • 0.63 lb (2)
  • 0.64 lb (2)
  • 0.65 lb (3)
  • 0.66 lb (2)
  • 0.67 lb (4)
  • 0.7 lb (2)
  • 0.7 lb/EA (2)
  • 0.71 lb (1)
  • 0.72 lb (2)
  • 0.74 lb (1)
  • 0.7460 lb/EA (1)
  • 0.75 lb (2)
  • 0.75 lb/EA (1)
  • 0.77 lb/EA (1)
  • 0.78 lb (1)
  • 0.79 lb (1)
  • 0.79 lb/EA (2)
  • 0.81 lb (1)
  • 0.81 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.84 lb (2)
  • 0.86 lb (1)
  • 0.87 lb (1)
  • 0.87 lb/EA (1)
  • 0.89 lb (1)
  • 0.93 lb (2)
  • 0.93 lb/EA (1)
  • 0.94 lb (2)
  • 0.94 lb/EA (1)
  • 0.97 lb (2)
  • 0.99 lb (2)
  • 1 lb (9)
  • 1 lb/EA (29)
  • 1.01 lb (3)
  • 1.03 lb (4)
  • 1.04 lb (3)
  • 1.05 lb (2)
  • 1.08 lb (1)
  • 1.1 lb;0.5 kg (2)
  • 1.16 lb (1)
  • 1.17 lb (2)
  • 1.2 lb (2)
  • 1.21 lb (2)
  • 1.23 lb (1)
  • 1.26 lb (2)
  • 1.27 lb (3)
  • 1.3099 lb/EA (1)
  • 1.33 lb (3)
  • 1.34 lb (1)
  • 1.35 lb (1)
  • 1.36 lb (1)
  • 1.39 lb (2)
  • 1.4 lb (2)
  • 1.42 lb (1)
  • 1.48 lb (2)
  • 1.49 lb (3)
  • 1.5 lb (2)
  • 1.51 lb (1)
  • 1.56 lb (1)
  • 1.57 lb (1)
  • 1.57 lb/EA (1)
  • 1.6 lb (1)
  • 1.67 lb (3)
  • 1.67 lb/EA (1)
  • 1.75 lb (3)
  • 1.80 lb (1)
  • 1.83 lb (1)
  • 1.85 lb/EA (3)
  • 1.86 lb (2)
  • 1.87 lb/EA (2)
  • 1.9 lb (1)
  • 1.93 lb (3)
  • 1.95 lb (1)
  • 1.97 lb/EA (1)
  • 10 lb (7)
  • 11.4 oz (322 g) (1)
  • 11.59 g (1)
  • 11.66 g (1)
  • 11.88 g (1)
  • 12.75 g (Net Weight);12 g (1)
  • 13 lb (1)
  • 14.26 g (1)
  • 19 lb/EA (1)
  • 19.47 g (Net Weight);21.38 g (1)
  • 2 lb (2)
  • 2 lb/EA (2)
  • 2.02 lb (2)
  • 2.1 lb (1)
  • 2.1 oz (59 g) (3)
  • 2.1 oz (60 g) (1)
  • 2.11 lb (2)
  • 2.15 lb (1)
  • 2.15 lb/EA (1)
  • 2.2 lb (1)
  • 2.25 lb (1)
  • 2.5 lb (2)
  • 2.54 lb (1)
  • 2.59 lb (1)
  • 2.62 g (1)
  • 2.75 lb (1)
  • 2.76 lb/EA (1)
  • 2.7999 lb/EA (1)
  • 3.053 g (1)
  • 3.5 lb (4)
  • 3.52 (1)
  • 3.7 g (1)
  • 3.84 lb (1)
  • 312.5 g (1)
  • 35 lb (1)
  • 4 lb (1)
  • 4.05 lb (1)
  • 4.25 lb/EA (1)
  • 4.283 g (1)
  • 4.35 lb/EA (1)
  • 4.4 lb (1)
  • 4.5 lb (2)
  • 4.75 lb (2)
  • 5.54 lb (1)
  • 6.15 lb (1)
  • 6.681 g (1)
  • 6.724 g (1)
  • 7 lb (1)
  • 7.51 g (Net Weight);7 g (1)
  • 9.57 g (Net Weight);9 g (1)
  • Show More...

• Thickness

  

  • .007 (30)
  • .0085 (1)
  • 0.003 in;0.07 mm (1)
  • 0.006 (1)
  • 0.007 (1)
  • 0.007 in (2)
  • 0.01 in (1)
  • 0.01 in , 0.25 mm (2)
  • 0.010000000000000 (1)
  • 0.02 (6)
  • 0.02 in;0.51 mm (5)
  • 0.025 (11)
  • 0.025 in (2)
  • 0.025 in;0.64 mm (6)
  • 0.03 (3)
  • 0.03 in;0.75 mm (2)
  • 0.03 in;0.76 mm (1)
  • 0.035 (2)
  • 0.035 in (1)
  • 0.035 in , 0.9 mm (2)
  • 0.035 in;0.89 mm (1)
  • 0.035 in;1 mm (1)
  • 0.035 INCH (1)
  • 0.04 (8)
  • 0.04 in , 1 mm (7)
  • 0.04 in , 1.0 mm (2)
  • 0.04 in;1 mm (1)
  • 0.04 INCH (3)
  • 0.040000000000000 (6)
  • 0.043 in;1.09 mm (2)
  • 0.045 in;1.1 mm (2)
  • 0.045 in;1.13 mm (4)
  • 0.047 in (1)
  • 0.047 in , 1.2 mm (1)
  • 0.047000000000000 (1)
  • 0.048 in;1.22 mm (1)
  • 0.049 in;1.25 mm (1)
  • 0.049000000000000 (1)
  • 0.05 (12)
  • 0.05 in , 1.3 mm (4)
  • 0.05 in;1.2 mm (6)
  • 0.05 in;1.3 mm (9)
  • 0.05 in;1.31 mm (4)
  • 0.050000000000000 (7)
  • 0.052 (1)
  • 0.052000000000000 (3)
  • 0.053 (1)
  • 0.053 in;1.35 mm (8)
  • 0.055 in;1.4 mm (2)
  • 0.057 in (1)
  • 0.06 (11)
  • 0.06 in , 1.5 mm (2)
  • 0.06 in , 1.52 mm (1)
  • 0.06 in;1.52 mm (1)
  • 0.06 in;1.6 mm (2)
  • 0.06 in;1.65 mm (4)
  • 0.060000000000000 (4)
  • 0.062 in (2)
  • 0.0625 in , 1.588 mm (1)
  • 0.07 (5)
  • 0.07 in;1.7 mm (1)
  • 0.070 in (1)
  • 0.075 in;1.91 mm (4)
  • 0.075000000000000;1.9050 (1)
  • 0.076000000000000 (1)
  • 0.08 (2)
  • 0.08 in (6)
  • 0.08 in , 2 mm (1)
  • 0.080000000000000 (4)
  • 0.085 in;2.15 mm (2)
  • 0.09 in;2.3 mm (1)
  • 0.090000000000000 (1)
  • 0.094 in (2)
  • 0.104 in (1)
  • 0.12 (1)
  • 0.125 in (3)
  • 0.132 in (1)
  • 0.198 in;5.03 mm (1)
  • 0.205 in (1)
  • 0.229 in;5.817 mm (1)
  • 0.5 mil (3)
  • 0.5 Millimeter (1)
  • 0.508 in (1)
  • 0.89 in (1)
  • 022 (1)
  • 057 (2)
  • 1.125 in (1)
  • 1.13 in (2)
  • 1.26 in (1)
  • 1/16 (7)
  • 1/16 in (1)
  • 1/4 in (2)
  • 1/4 INCH (2)
  • 1/8 (1)
  • 1/8 in (1)
  • 10 (4)
  • 10 mil (3)
  • 10 mil;0.25 mm (5)
  • 11 ga (2)
  • 12 (2)
  • 12 ga (2)
  • 12 mil;0.3 mm (1)
  • 12 Millimeter (1)
  • 125 (1)
  • 125 mil (2)
  • 15 (1)
  • 178 mm (3)
  • 18 mm (1)
  • 2.25 in;57.2 mm (1)
  • 20 (3)
  • 22 (1)
  • 26 (1)
  • 3 mil (1)
  • 3 mil;0.08 mm (1)
  • 3.313 in;84.2 mm (1)
  • 3.5 mil (1)
  • 3/32 (3)
  • 3/64 (4)
  • 3/8 in (1)
  • 30 (3)
  • 30 mil (3)
  • 30 mil;0.76 mm (3)
  • 30 mil;0.762 mm (1)
  • 4 (1)
  • 4 mil (2)
  • 4 mil;0.004 in;0.102 mm (2)
  • 4.5 mil (1)
  • 5 (1)
  • 5 mil;0.005 in;0.127 mm (1)
  • 5.0 (1)
  • 5/64 in (2)
  • 6 mil (2)
  • 7 mil (15)
  • 7 mil;0.177 mm (10)
  • 7/32 in (2)
  • 7/64 in (1)
  • 8 mil (1)
  • 8.5 mil (3)
  • 9 mil (2)
  • 9/64 (1)
  • 90 mil (1)
  • NA (1)
  • Thin (2)
  • Show More...

• Size

  

  • #10 (14)
  • #10 – #12 (1)
  • #10 X 1 IN (11)
  • #10 X 1/2 IN (4)
  • #10 x 1-1/2 IN (5)
  • #10 x 1-1/4 IN (3)
  • #10 x 2 IN (4)
  • #10 x 2-1/2 IN (1)
  • #10 x 3 IN (1)
  • #10 x 3/4 IN (5)
  • #10-24 x 1 IN (1)
  • #10-32 x 1/2 IN (1)
  • #10-32 x 1-1/2 IN (1)
  • #10-32 x 2 IN (1)
  • #12 (1)
  • #12 x 1 IN (3)
  • #12 x 1-1/2 IN (6)
  • #12 x 1-1/4 IN (2)
  • #12 x 2 IN (2)
  • #12 x 3/4 IN (2)
  • #12;#14 (3)
  • #14 — #10 AWG Code STR, #12 — #10 AWG Code SOL (4)
  • #2 AWG Class B, C, G, H, I, K, M and DLO (4)
  • #2 AWG Class K and M and DLO (2)
  • #2 AWG Code (15)
  • #4 — #3 AWG Code STR, #2 AWG Code SOL (7)
  • #4 AWG Class B, C, G, H, I, K, M and #5, #4, #3 AWG DLO (3)
  • #6 (11)
  • #6 AWG Class B, C, G, H, I, K, M and DLO (9)
  • #6 AWG Code (10)
  • #6 x 1 IN (6)
  • #6 x 1-1/2 IN (2)
  • #6 x 1-1/4 IN (4)
  • #6 x 1-1/8 IN (3)
  • #6 x 1-5/8 IN (3)
  • #6 X 2 IN (4)
  • #6 x 7/16 IN (1)
  • #6-32 x 1 IN (3)
  • #6-32 x 1/2 IN (4)
  • #6-32 x 1-1/2 IN (3)
  • #6-32 x 1-1/4 IN (3)
  • #6-32 x 2 IN (4)
  • #6-32 x 2-1/2 IN (2)
  • #6-32 x 3 IN (2)
  • #6-32 x 3/4 IN (3)
  • #8 (11)
  • #8 AWG Class B, C, G, H, I, K, M and DLO (2)
  • #8 AWG Code (6)
  • #8 x 1 IN (6)
  • #8 X 1/2 IN (7)
  • #8 x 1-1/2 IN (4)
  • #8 x 1-1/4 IN (10)
  • #8 x 2 IN (2)
  • #8 x 2-1/2 IN (2)
  • #8 x 3 IN (1)
  • #8 X 3/4 IN (7)
  • #8-32 X 1 IN (2)
  • #8-32 x 1/2 IN (1)
  • #8-32 x 1-1/2 IN (1)
  • #8-32 x 1-1/4 IN (1)
  • #8-32 x 2 IN (2)
  • #8-32 x 3 IN (1)
  • #8-32 x 3/4 IN (1)
  • 0.22 x 1.56 es (3)
  • 0.335 in H x 1 in W (4)
  • 0.335 in H x 1.75 in W (2)
  • 0.645 in H x 1 in W (1)
  • 0.780 IN Length X 0.520 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.690 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 0.820 IN Width X 0.380 IN Height (2)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 in (3)
  • 1 In (EMT), 3/4 In (IMC/Rigid) (2)
  • 1 In Conduit (6)
  • 1.00 x 0.34 (2)
  • 1.00 x 0.44 (2)
  • 1/0 AWG Class B, C, G, H, I, K, M and DLO (2)
  • 1/0 AWG Code (3)
  • 1/2 (10)
  • 1/2 in (16)
  • 1/2 In (EMT) (2)
  • 1/2 In, 3/4 In (3)
  • 1/2 In, 3/4 In Conduit (8)
  • 1/2 Inch Width x 18 Foot (1)
  • 1/2 x 1 (2)
  • 1/2 x 1 in (4)
  • 1/2 x 1-1/2 (2)
  • 1/2 x 1-1/4 (3)
  • 1/2 x 2 (3)
  • 1/2 x 2-3/4 (1)
  • 1/2 x 3-3/4 (1)
  • 1/2 x 4 (2)
  • 1/2 X 4-1/2 (3)
  • 1/2 x 5 (1)
  • 1/2-13 x 2 (2)
  • 1/2X3-3/4 (2)
  • 1/4 (22)
  • 1/4 In-20 TPI (2)
  • 1/4 x 1 (7)
  • 1/4 x 1/2 (4)
  • 1/4 X 1-1/2 (8)
  • 1/4 X 1-1/2 IN Marker (12)
  • 1/4 x 1-1/4 (9)
  • 1/4 x 1-3/4 (2)
  • 1/4 x 1-3/8 (1)
  • 1/4 X 2 (10)
  • 1/4 x 2-1/2 (3)
  • 1/4 x 2-1/4 (3)
  • 1/4 x 2-3/4 (1)
  • 1/4 x 3 (5)
  • 1/4 x 3/4 (5)
  • 1/4 x 3-1/4 (2)
  • 1/4 x 4 (3)
  • 1/4 x 7/8 (1)
  • 1/4" (3)
  • 1/4-20 (1)
  • 1/4-20 x 1 (2)
  • 1/4-20 x 1-1/2 (2)
  • 1/4X2 (2)
  • 1/8 x 3 (1)
  • 10 (14)
  • 10.2 mm (1)
  • 10x1 (6)
  • 1-1/2 In Conduit (2)
  • 1-1/4 in (2)
  • 1-1/4 In Conduit (2)
  • 1-1/8 IN Width (4)
  • 12 (5)
  • 12 - 10 (2)
  • 16 - 14 (2)
  • 2 In Conduit (2)
  • 2 IN x 100 FT (2)
  • 2 INCH (16)
  • 2.00 x 0.44 (2)
  • 2.01 in x 1.12 in x 1.43 in (2)
  • 2.25 in H x 4.5 in W (1)
  • 2/0 AWG Code (6)
  • 2-1/4 IN Width (3)
  • 22 - 18 (3)
  • 2-25/32 inch (13)
  • 250 kcmil Code (2)
  • 3 in H x 1 in W (1)
  • 3/0 AWG Code (3)
  • 3/16 x 1-1/4 (4)
  • 3/16 x 3 (3)
  • 3/32 In Thickness Purlin (2)
  • 3/4 in (5)
  • 3/4 In (EMT), 1/2 In (IMC/Rigid) (6)
  • 3/4 IN x 10 FT (2)
  • 3/8 (17)
  • 3/8 in (3)
  • 3/8 In Conduit (4)
  • 3/8 x 1 (4)
  • 3/8 x 1/2 (2)
  • 3/8 x 1-1/2 (5)
  • 3/8 x 1-1/4 (4)
  • 3/8 x 1-7/8 (1)
  • 3/8 x 2 (4)
  • 3/8 x 2-1/4 (1)
  • 3/8 x 2-3/4 (1)
  • 3/8 x 3 (4)
  • 3/8 x 3/4 (4)
  • 3/8 x 3-3/4 (1)
  • 3/8 x 4 (3)
  • 3/8 x 5 (2)
  • 3/8" (2)
  • 3/8-16 x 1-9/16 (2)
  • 3/8x2 (2)
  • 3/8X3 (3)
  • 3-1/2 Inch (15)
  • 350 kcmil Code (2)
  • 4.33 in W x 200 ft L (5)
  • 4/0 AWG Class B, C, G, H, I, K, M and DLO (3)
  • 4/0 AWG Class K and M and DLO (2)
  • 4/0 AWG Code (6)
  • 5/16 (2)
  • 5/16 x 1 (2)
  • 500 kcmil Code (2)
  • 6 (21)
  • 6 In (2)
  • 6-32 (3)
  • 7/16 In Diameter (2)
  • 8 (20)
  • 8 IN Length (2)
  • 9/16 in (6)
  • 9/16 In Diameter (2)
  • 9/16 x 1-1/4 in (3)
  • Fine Point (2)
  • H=.697 - W=.390 - ID=.161 (2)
  • H=.866 - W=.500 - ID=.197 (2)
  • H=.969 - W=.551 - ID=.236 (2)
  • H=1.01 - W=.717 - ID=.252 (2)
  • H=1.04 - W=.642 - ID=.339 (2)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=6.00 - W=3.25 (2)
  • L(2.220) x W(2.520) x H(0.750) (1)
  • L(3.000) x W(3.023) x H(0.870) (1)
  • L(6.250) x W(6.250) x H(4.250) (1)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.120 - W=1.250 - H=1.348 (2)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.620 - W=1.750 - H=1.750 (2)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • Length 1-13/16 inch (3)
  • Length 12-1/2 in X Depth 2-3/8 in (2)
  • NA (8)
  • Premium (2)
  • Splice 4 inch, Sleeve 5-1/2 inch (6)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (20)
  • Thickness - 7mil - Length-66' - Width 3/4" (10)
  • Thickness=.030 - Width=.75 - Length=22 feet (3)
  • VARIOUS SIZ (2)
  • Show More...

• Bundle Diameter

  

  • 0.01 in , 0.25 mm (1)
  • 0.06 to 0.63 in , 1.5 to 16 mm (2)
  • 0.06 to 2.01 in , 1.5 to 51 mm (1)
  • 0.06 to 4.2 in , 1.5 to 102 mm (1)
  • 0.0625 in (Minimum);1.59 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);1.75 in (Maximum);44.45 mm (Maximum) (4)
  • 0.0625 in (Minimum);1.59 mm (Minimum);2.0 in (Maximum);50.8 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (2)
  • 0.0625 in (Minimum);1.59 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (4)
  • 0.0625 to 1.5 in , 1.59 to 38.1 mm (1)
  • 0.0625 to 2 in , 1.59 to 50.8 mm (1)
  • 0.0625 to 4 in , 1.59 to 101.6 mm (1)
  • 0.08 in (Minimum);2 mm (Maximum) to 2.99 in (Maximum);76 mm (Maximum) (1)
  • 0.08 in (Minimum);2 mm (Minimum);0.63 in (Maximum);16 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);1.14 in (Maximum);29 mm (Maximum) (2)
  • 0.08 in (Minimum);2 mm (Minimum);3.0 in (Maximum);76 mm (Maximum) (2)
  • 0.08 in (Minimum);2.0 mm (Minimum);2.99 in (Maximum);76 mm (Maximum) (1)
  • 0.08 to 0.63 in , 2 to 16 mm (2)
  • 0.08 to 1.14 in , 2 to 29 mm (1)
  • 0.08 to 1.38 in , 2 to 35 mm (2)
  • 0.08 to 2.01 in , 2 to 51 mm (2)
  • 0.08 to 2.72 in , 2 to 69 mm (1)
  • 0.08 to 2.99 in , 2 to 76 mm (2)
  • 0.08 to 4 in , 2 to 102 mm (1)
  • 0.12 to 1.77 in , 3 to 45mm (2)
  • 0.12 to 1.89 in , 3 to 48 mm (4)
  • 0.12 to 3.07 in , 3 to 78 mm (2)
  • 0.12 to 4.02 in , 3 to 102 mm (2)
  • 0.138 in (Minimum);3.5 mm (Minimum);1.77 in (Maximum);45 mm (Maximum) (3)
  • 0.138 in (Minimum);3.5 mm (Minimum);4.01 in (Maximum);102 mm (Maximum) (2)
  • 0.138 to 1.77 in , 3.5 to 45 mm (2)
  • 0.187 in (Minimum);4.76 mm (Minimum);3.0 in (Maximum);76.2 mm (Maximum) (1)
  • 0.187 in (Minimum);4.76 mm (Minimum);4.0 in (Maximum);101.6 mm (Maximum) (1)
  • 0.187 in (Minimum);4.76 mm (Minimum);4.875 in (Maximum);123.83 mm (Maximum) (1)
  • 0.187 in;4.76 mm (Minimum);7.0 in (Maximum);177.8 mm (Maximum) (1)
  • 0.19 to 4 in , 4.8 to 102 mm (1)
  • 0.236 in (Minimum);6 mm (Minimum);3.54 in (Maximum);90 mm (Maximum) (3)
  • 0.236 in (Minimum);6 mm (Minimum);5.0 in (Maximum);127 mm (Maximum) (2)
  • 0.236 in (Minimum);6 mm (Minimum);6.96 in (Maximum);177 mm (Maximum) (1)
  • 0.236 in (Minimum);6 mm (Minimum);9.01 in (Maximum);229 mm (Maximum) (1)
  • 0.236 to 3.54 in , 6 to 90 mm (1)
  • 0.236 to 9.01 in , 6 to 229 mm (1)
  • 0.28 to 1.97 in , 7 to 50 mm (1)
  • 0.28 to 2.8 in , 7 to 71 mm (1)
  • 0.28 to 5.12 in , 7 to 130 mm (1)
  • 0.28 to 6.89 in , 7 to 175 mm (1)
  • 0.38 to 4 in , 9.7 to 102 mm (1)
  • 0.41 to 1.77 in , 10.44 to 45 mm (1)
  • 0.48 to 4.01 in , 12.29 to 102 mm (1)
  • 0.50 to 3.74 in , 12.7 to 65 mm (1)
  • 0.75 in;19.1 mm (2)
  • 1.25 in (Maximum);31.75 mm (Maximum) (2)
  • 1.25 in;32 mm (2)
  • 1.87 in;47.5 mm (3)
  • 10.75 in (Maximum);273.05 mm (Maximum) (1)
  • 2.25 (1)
  • 3 in;76.2 mm (2)
  • 3.125 (3)
  • 3/16 in (Minimum);2 in (Maximum) (1)
  • 4 in;101.6 mm (2)
  • 4.375 (1)
  • 7.2 in (Maximum);182.88 mm (Maximum) (1)
  • 7.2 in;183 mm (1)
  • Max 3 in , Max 76.2 mm (1)
  • Max 3.9 in , Max 100 mm (1)
  • Max 4.02 in , Max 102 mm (2)
  • Max 6 in , Max 152 mm (1)
  • Show More...

• Product Type

  

  • "Z" Purl" Hanger, 1/4" Threaded Rod (2)
  • 1/2" Staples Plastic Insulated 2 Conductor Romex 14-2 (3)
  • 2 Position Bridge (3)
  • 3M™ Cold Shrink 3-Conductor Breakout Kits 3C-Bok Series (5)
  • 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (4)
  • 3M™ Cold Shrink End Caps Ec Series (4)
  • 3M™ Cold Shrink Inline Splice Kits 5730 Series (3)
  • 3M™ Cold Shrink Inline Splice Kits 5740 Series (2)
  • 3M™ Cold Shrink QS-Iii 3/C Armored or Non-Armored Cable Spli (3)
  • 3M™ Cold Shrink QS-Iii Inline Shielded Cable Splice Kits 551 (4)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3G Series For (3)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7600-T-3-RJS Series F (6)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-S, 7680-S & 7690 (11)
  • 3M™ Cold Shrink QT-Iii Termination Kit 7620-T & 7690-T Serie (9)
  • 3M™ Heat Shrink Cable Breakout Boot (4)
  • 3M™ Heat Shrink Heavy-Wall Cable Sleeves Itcsn (9)
  • 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 (25)
  • 3M™ Heat Shrink Tubing Bbi (2)
  • 3M™ Highland™ Nylon Fully Insulated Butted Seam Female Disco (2)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Block Forks (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Locking Forks (4)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects (3)
  • 3M™ Highland™ Vinyl Insulated Butted Seam Ring Tongues (8)
  • 3M™ Highland™ Wire Connectors (2)
  • 3M™ Motor Lead Pigtail Splice Kits 5316-5319 (3)
  • 3M™ Motor Lead Pigtail Splice Kits 5321-5324 (3)
  • 3M™ Motor Lead Pigtail Splice Kits, 1-Hole Lug Connections 5 (4)
  • 3M™ Multi-Purpose Duct Tape 3900 (2)
  • 3M™ Rejacketing Sleeves RJS Series (7)
  • 3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Seri (2)
  • 3M™ Scotchcast™ Inline Splice Kits 72-N Series (2)
  • 3M™ Scotchcast™ Multi-Mold Resin Splice Kits 85 Series (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (11)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Moisture Guard Connectors (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Standard Nylon Cable Ties (3)
  • 3M™ Thin-Wall Heat Shrink Tubing Eps-300 (5)
  • AMT Connector (2)
  • Anchor Kit (10)
  • Automatic Tension Splice Connector (2)
  • B33, B342, White, 0.313 X 2" Fit (2)
  • Barricade Tape (6)
  • Barrier Strip (3)
  • Beam Clamp (7)
  • Black Fine Point Marker (2)
  • Black Medium Point Marker (2)
  • Butt Connector (3)
  • Butt Splice (7)
  • Butt Splice Connector (13)
  • Cable Connector (2)
  • Cable Hook (2)
  • Cable Staple (12)
  • Cable Tie (59)
  • Cable Tie Mount (3)
  • Cable Tie Mounting Base (9)
  • Ceiling Wire (2)
  • Channel Nut (2)
  • Clip, Conduit, (4)
  • Component Label (2)
  • Compression (34)
  • Compression Connector (7)
  • Compression Lug (23)
  • Compression Splice (3)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Concrete Anchor System (3)
  • Conductor Lug (11)
  • Conduit to Beam Fastener (7)
  • Conduit to BM FS, 1 1/2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 1" Emt, 3/4" Imc, Rigid, 1/8" to 1/4" Flan (2)
  • Conduit to BM FS, 1/2" Emt, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 1/2", 3/4" Conduit, 5/16" to 1/2" Flange (2)
  • Conduit to BM FS, 2" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to BM FS, 3/4" Emt, 1/2" Imc, Rigid, 1/8" to 1/4" FL (2)
  • Conduit to BM FS, 3/8" Conduit, 1/8" to 1/4" Flange (2)
  • Conduit to Conduit Fastener (2)
  • Conduit to Rod FS, Guide-Rite, 1/2", 3/4" Conduit Size (2)
  • Copper Comp. Lug, 2 Hole, #2 Awg Flex, 1 (2)
  • Copper Compression Lug (5)
  • Copper Connector (3)
  • Coupling Nut (3)
  • Crimp On Wire Connector (2)
  • C-Type Copper Compression Tap (8)
  • Cu TP 2HL Lug Longbrl 4/0 3/8B Pur (2)
  • Disconnect Terminal (2)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Drop in Anchor (2)
  • Drop-In Anchor (2)
  • Drywall Screw (18)
  • Duct Tape (4)
  • Easy-Splice Roll On (2)
  • Electrical Tape (26)
  • End Bracket (2)
  • End Cover (6)
  • End Plate (2)
  • Eye Bolt (3)
  • Feed Through Terminal (6)
  • Female Disconnect (4)
  • Female Disconnecter Terminal (3)
  • Female Disconnector (5)
  • Fender Washer (14)
  • Filament Tape (2)
  • Fish Tape (2)
  • Flat Washer (15)
  • Flex Lug (2)
  • Fork Terminal (13)
  • Friction Tape (2)
  • Ground Connector (3)
  • Ground Screw (3)
  • Hammer Drive Anchor (3)
  • Hanger, Fixture, Florescentlight (2)
  • Heat Shrink Tube (6)
  • Heat Shrink Tubing (3)
  • Heavy Wall Heat Shrink Tube (8)
  • Heavy Wall Shrink Tube (8)
  • Hex Bolt (15)
  • Hex Head Masonry Screw (3)
  • Hex Nut (12)
  • H-Type Compression Connector (9)
  • Inline Resin Splicing Kits (2)
  • Insulated Aluminum Service Entrance Compression Splice (5)
  • Insulated Butt Splice (4)
  • Insulated Ferrule (4)
  • Insulated Staples (2)
  • Insulating Sleeve (12)
  • Insulation Displacement Connector (4)
  • Insulation-Tap Connector (9)
  • Jack Chain (3)
  • K-Lath Screw (5)
  • Kwikwire Accessory, Toggle Style Y Type (2)
  • Lag Screw (6)
  • Lay-In Connector (2)
  • Line Measuring Tape (5)
  • Linemeasuring Tape (5)
  • Linerless Rubber Tape (4)
  • Lock Washer (9)
  • Locking Fork (4)
  • Long Barrel Lug (11)
  • Lug (2)
  • Machine Screw (32)
  • Machine Screw Anchor (4)
  • Machine Screw Kit (2)
  • Mechanical (99)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (17)
  • Mechanical Grounding Connector (3)
  • Metal Piercing Screw (3)
  • Molds (2)
  • Multi-Cable Staple (2)
  • Multi-Conductor Terminal Block (2)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Non Detectable Warning Tape (2)
  • Non-Metallic Cable Connector (2)
  • Nylon Label (2)
  • P1™ Heat Shrink Label (4)
  • Panelboard Lug (3)
  • Partition Plate (2)
  • Pin Terminal (2)
  • Pipe Wrap (2)
  • Plastic Insulated Staple (4)
  • Plug-In Bridge (2)
  • Power Cable Splice Cover (4)
  • Power Cable Termination (4)
  • Power Distribution Block (15)
  • Power Terminal Block (2)
  • Pre-Printed Wire Marker Book (2)
  • Purlin Clip (3)
  • Push-In Connector (3)
  • Push-in Wire Connector (7)
  • Ring Terminal (10)
  • Ring Tongue Compression Terminal (5)
  • Rod & Wire FS (2)
  • Roof Flashing (2)
  • Roof Jack (2)
  • Round Head Machine Screw (6)
  • RUN/TAP (9)
  • Scotch® Multi-Colored Vinyl Electrical Tape 35 (11)
  • Scotch® Varnished Cambric Tape 2510 (3)
  • Scotch® Varnished Cambric Tape 2520 (2)
  • Screw Connection Single Level-Through-Feed (7)
  • Screw Gun Bracket (2)
  • Self Drill Screw (4)
  • Self Drilling Screw (23)
  • Service Entrance Compression Splice (5)
  • Service Post Connector (14)
  • Sharp Frame Screw (2)
  • Sheet Metal Screw (10)
  • S-Hook (2)
  • Single Barrel Lug (6)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Sleeve Anchor (7)
  • Spiral Wrap (2)
  • Splice (34)
  • Splice Cap (2)
  • Splice Connector (2)
  • Splice Kit (5)
  • SPLICE REDUCER (6)
  • Splicer Reducer (3)
  • Splicing Connector (2)
  • Split Bolt Connector (36)
  • Split Lock Washer (3)
  • Spring Nut (3)
  • SPST Support Box (2)
  • Square Washer (3)
  • Stable (2)
  • Standard Barrel Lug (17)
  • Standard Barrel Single Hole Compression Lug (18)
  • Staple (24)
  • Submersible Connector (2)
  • Tap Bolt (15)
  • Tek Screw (13)
  • Terminal (140)
  • Terminal Lug (3)
  • Terminal Ring Lug (2)
  • Terminal Strip (5)
  • Terminal, Ring, Vinyl Insulated, Blue, Butted Seam, 16-14 Aw (4)
  • Terminal, Spade, Vinyl Insulated, Blue, Butted Seam, 16-14 A (3)
  • Thin Wall Heat Shrink Tube (17)
  • Thin Wall Shrink Tube (17)
  • Tie Wire (4)
  • Toggle Bolt (10)
  • Twister Connector (6)
  • Twist-On Wingnut (7)
  • Twist-On Wire Connector (12)
  • Twist-On Wire Nut (5)
  • Two Barrel Lug (2)
  • Two-Way Splice Connector (9)
  • Universal End Stop (2)
  • Vinyl Electrical Tape (3)
  • Vinyl Label (3)
  • Vinyl Mastic Tape (2)
  • Wall Dog Kit (2)
  • Wall Driller Anchor Kit (3)
  • Wedge Anchor (13)
  • Wedge Clamp (3)
  • Wing Twist Connector (2)
  • Wing Wire Connector (6)
  • Winged Wire Connector (10)
  • Wire Clip (4)
  • Wire Connector (16)
  • Wire Connector, Ideal, P/T, SZ: 8.000 In Len, Wire SZ: 12 Awg, BR (2)
  • Wire Marker Book (10)
  • Wire Marker Booklet (4)
  • Wire Marker Booklet, Ideal, SZ: 1/4 X 1-1/2 In MRKR, Plastic-Im (6)
  • Wire Marker Kit (2)
  • Wire Twist Connector (6)
  • Zamac Anchor (4)
  • Show More...

• Overall Length

  

  • 0.201 in;5.1 mm (1)
  • 0.205 in (2)
  • 0.24 in (1)
  • 0.244 in (4)
  • 0.43 in (1)
  • 0.571 in;14.5 mm (3)
  • 0.60 in;15.2 mm (1)
  • 0.65 in (1)
  • 0.650 in;16.5 mm (1)
  • 0.69 in (1)
  • 0.75 in (1)
  • 0.780 in (5)
  • 0.787 in (1)
  • 0.80 in;20.3 mm (2)
  • 0.82 in (1)
  • 0.83 in (1)
  • 0.85 in;22 mm (1)
  • 0.854 in (1)
  • 0.86 in;21.8 mm (1)
  • 0.866 in (1)
  • 0.866 in;22 mm (1)
  • 0.87 in;22.098 mm (2)
  • 0.88 in (1)
  • 0.899 in (2)
  • 0.94 in;23.9 mm (1)
  • 0.95 in (1)
  • 0.95 in;24.1 mm (1)
  • 0.95 in;24.13 mm (1)
  • 0.96 in (1)
  • 0.965 in;24.5 mm (1)
  • 0.97 in (6)
  • 0.971 in (1)
  • 0.98 in;24.9 mm (1)
  • 0.984 in;25 mm (1)
  • 0.986 in (2)
  • 1 (1)
  • 1 in (4)
  • 1 in;25.4 mm (4)
  • 1.00 in (1)
  • 1.004 in;25.5 mm (1)
  • 1.02 in;25.908 mm (1)
  • 1.03 in (2)
  • 1.03 in;26.16 mm (1)
  • 1.03 in;26.162 mm (1)
  • 1.06 in (3)
  • 1.06 in;27 mm (2)
  • 1.07 in (1)
  • 1.087 in;27.6 mm (1)
  • 1.088 in (1)
  • 1.09 in (3)
  • 1.11 in;28 mm (1)
  • 1.12 in (2)
  • 1.13 in (4)
  • 1.14 in;29 mm (1)
  • 1.153 in (2)
  • 1.16 in (5)
  • 1.16 in;29.5 mm (2)
  • 1.161 in (1)
  • 1.201 in (1)
  • 1.23 in;31.2 mm (1)
  • 1.25 in (1)
  • 1.25 in;31.8 mm (1)
  • 1.252 in (1)
  • 1.26 in;32 mm (1)
  • 1.29 in (1)
  • 1.31 in (3)
  • 1.319 in;33.5 mm (1)
  • 1.350 in (1)
  • 1.37 in (1)
  • 1.378 in;35 mm (1)
  • 1.38 in (1)
  • 1.38 in;35.1 mm (2)
  • 1.45 in;36.8 mm (1)
  • 1.47 in (4)
  • 1.47 in;37 mm (2)
  • 1.47 in;37.3 mm (3)
  • 1.496 in (1)
  • 1.5 in (2)
  • 1.5 in;38 mm (1)
  • 1.50 in (4)
  • 1.516 in;38.5 mm (3)
  • 1.54 in (2)
  • 1.55 in (1)
  • 1.55 in;39.4 mm (2)
  • 1.574 in (1)
  • 1.575 in;40 mm (1)
  • 1.6 in (1)
  • 1.62 in (2)
  • 1.65 in (3)
  • 1.70 in (1)
  • 1.72 in;43.7 mm (1)
  • 1.75 in (3)
  • 1.752 in (2)
  • 1.772 in (1)
  • 1.78 in (1)
  • 1.81 in (2)
  • 1.82 in;46.2 mm (1)
  • 1.831 in;46.5 mm (4)
  • 1.84 in (2)
  • 1.85 in (1)
  • 1.875 in (1)
  • 1.88 in (2)
  • 1.88 in;47.8 mm (1)
  • 1.91 in (1)
  • 1.913 in (2)
  • 1.93 in (3)
  • 1.95 in (1)
  • 1.9688 in (1)
  • 1.97 in (1)
  • 100 ft (1)
  • 1000' (305 m) (1)
  • 1-1/16 in (2)
  • 1-1/2 (1)
  • 1-1/2 in (2)
  • 1-1/2 in (Stud) (1)
  • 1-1/4 in (1)
  • 1-1/4 in (Stud) (1)
  • 1-1/8 in (1)
  • 1-1/8 in (Stud) (1)
  • 1-11/15 in (1)
  • 1-11/32 in (1)
  • 1-13/15 in (1)
  • 1-13/16 in (2)
  • 1-15/32 in (4)
  • 1-19/32 in (1)
  • 13/16 in (1)
  • 1-3/64 in (1)
  • 1-5/32 in (1)
  • 1-61/64 in (1)
  • 17 in (1)
  • 1-7/18 in (1)
  • 1-7/8 in (1)
  • 1-9/32 in (1)
  • 2 in (8)
  • 2 in;51 mm (1)
  • 2.01 in;51.0 mm (1)
  • 2.03 in (3)
  • 2.06 in;52 mm (1)
  • 2.069 in;53.1 mm (1)
  • 2.071 in (1)
  • 2.08 in (1)
  • 2.10 in (2)
  • 2.106 in (1)
  • 2.12 in (1)
  • 2.18 in (2)
  • 2.209 in (1)
  • 2.23 in (1)
  • 2.25 in (4)
  • 2.252 in (1)
  • 2.26 in;57.4 mm (1)
  • 2.27 in (1)
  • 2.28 in (1)
  • 2.31 in;59 mm (1)
  • 2.32 in (1)
  • 2.362 in;60 mm (1)
  • 2.39 in (1)
  • 2.40 in (1)
  • 2.47 in (1)
  • 2.50 in (1)
  • 2.56 in (1)
  • 2.56 in;65 mm (1)
  • 2.58 in (1)
  • 2.60 in (2)
  • 2.61 in (1)
  • 2.63 in (2)
  • 2.677 in (2)
  • 2.68 in (2)
  • 2.70 in (1)
  • 2.75 in (1)
  • 2.77 in (1)
  • 2.795 in (1)
  • 2.81 in (1)
  • 2.81 in;71 mm (1)
  • 2.85 in;72.4 mm (1)
  • 2.88 in (1)
  • 2.88 in;73 mm (1)
  • 2.9 in (4)
  • 2.93 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (1)
  • 2-13/16 in (1)
  • 2-25/32 in (5)
  • 2-3/16 in (1)
  • 2-3/8 in (1)
  • 25 ft (1)
  • 2-5/12 in (2)
  • 25/32 in (2)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (2)
  • 3.02 in (1)
  • 3.03 in (1)
  • 3.06 in (1)
  • 3.09 in (1)
  • 3.14 in (1)
  • 3.15 in (1)
  • 3.17 in (1)
  • 3.18 in (2)
  • 3.2 in;81 mm (1)
  • 3.24 in (1)
  • 3.25 in (3)
  • 3.41 in (1)
  • 3.46 in (1)
  • 3.5 in (3)
  • 3.52 in (1)
  • 3.66 in (1)
  • 3.787 in;96.2 mm (1)
  • 3.8 in (1)
  • 3.880 in (1)
  • 3/4 in (1)
  • 31/32 in (1)
  • 3-1/32 in (1)
  • 3-3/16 in (2)
  • 4 in (7)
  • 4.01 in (1)
  • 4.20 in (1)
  • 4.37 in (1)
  • 4.48 in (1)
  • 4.5 in (1)
  • 4.57 in (1)
  • 4.626 in;117.0 mm (1)
  • 4.65 in (1)
  • 4.66 in (1)
  • 4.70 in (1)
  • 4-1/4 in (2)
  • 4-3/16 in (2)
  • 48 in (3)
  • 5.24 in (1)
  • 5.40 in (1)
  • 5.5 in (7)
  • 5.5" (14 cm) (3)
  • 5.50 in (1)
  • 5.52 in (1)
  • 5.540 in;140.7 mm (1)
  • 5.75 in (1)
  • 5.79 in (1)
  • 5.83 in (2)
  • 6.36 in (1)
  • 6.375" (16.2 cm) (1)
  • 6.38 in (2)
  • 6.5 in (1)
  • 6.62 in (1)
  • 7.25" (18.4 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.52 in (1)
  • 7.75 in (1)
  • 8 in (2)
  • 9.23 in (1)
  • 9/16 in (1)
  • Show More...