Narrow By:

• Manufacturer: Abb Installation Products, Inc

• Product Type

  

  • 1 1/4 Non-Insul 45 Deg Liqtight CN (1)
  • 1 In BLK Beauty Cord Fit .660-.780 (1)
  • 1 In Cord Connector .500-.625 Range (1)
  • 1 Inch 90 Deg Bullet Connector (1)
  • 1.25 In 90 Deg Grounded LT Fitting (1)
  • 1/2 Conn, NM Cable/Flex Cord, NM (1)
  • 1/2 In Cord Connector .250-.375 RNG (1)
  • 1/2 Inch 90 Deg Bullet Connector (1)
  • 1/2 Inch Conn, Hittlock, Use W/ NMSC (1)
  • 1/2 Inch Straight Bullet Connector (1)
  • 1/2 Straight Liquidtight FTG Assem (1)
  • 1/2IN 90D LT Noninsul Conn Alum (1)
  • 1/2INCH D-T Dev BX W/MNT LGS 3 HL (1)
  • 1-1/2IN 90D LT Noninsul GRND Conn I (1)
  • 1-1/2IN STR LT Cordconn 1.39-1.6nyl (1)
  • 1-1/4IN 45D LT Conn Typea Cond Irn (1)
  • 1-1/4IN STR LT Conn Typea Cond Irn (1)
  • 14-.5 In-26-.5 In, Bar Hanger, W/Stud (1)
  • 1-G Carpet PLT LEN4-5/8 W6-1/8 BLK (1)
  • 1-G FLSH SVC FLR-BX 31CU Ko.5/.75/1 (1)
  • 1-G Flush SVC FLR-BX 47CU 1/2-3/4ko (1)
  • 1-Gang Flush SVC FLR-BX 60CU STL (1)
  • 1IN 45D LT GRND Conn W/Lug Iron (1)
  • 1IN 90D LT Cord Conn .77-.895 Nyl (1)
  • 1IN 90D LT Noninsul GRND Conn Irn (1)
  • 1IN LT Type B Cond PVC BLK (1)
  • 1IN Wire Mesh Grip Assy (1)
  • 1-Piece CBL/Pipe CLP 1-1/4IN STL (1)
  • 1-Piece CBL/Pipe CLP 1IN STL (1)
  • 2 1/2 In Noninsul 45DEG Liqtight CN (1)
  • 2G 32 Cu In Zip Box W/Nails (1)
  • 2-Gang Flush SVC FLR-BX 74CU Plastc (1)
  • 2GNG SQ Box Partn 2-1/8IN 1/2-1 CVR (1)
  • 2-Hole CLSD Angl FTG Eg STL (1)
  • 2IN 90D LT Noninsul GRND Conn Irn (1)
  • 3 Gang Deep Box, 1IN & 3/4IN Ko'S (1)
  • 3 In Insul Ground Liq Tight 90 Deg (1)
  • 3 X 2 SWBX -2 3/4 DP Gngble (1)
  • 3.5 In Otlt BX-Bar HNGR-Mold Fast (1)
  • 3/4 &1 4 In. Octogon Box (1)
  • 3/4 Black Beauty Cord Fit .250-.400 (1)
  • 3/4 Black Beauty Cord Fit .560-.690 (1)
  • 3/4 In Cord Conn .125-.250 Rang (1)
  • 3/4 In Cord Conn .625-.750 Rang (1)
  • 3/4 Inch 90 Deg Liquidtight FTG (1)
  • 3/4 Inch Straight Bullet Connector (1)
  • 3/4IN STR LT Noninsul Conn Alum (1)
  • 3/4IN Wire Mesh Grip Assy (1)
  • 3/4INCH 90 Deg Bullet Connector (1)
  • 3/8 Inch 90 Deg Liquidtight FTG (1)
  • 3/8 Inch Straight Liquidtight FTG (1)
  • 3-1/2 Oct BX, STL, 11.8CU, 1/2-Ko, Clam (1)
  • 3-1/2 Round BX Cover, STL, 1/2-Ko, FL (1)
  • 3-1/2, Ceiling BX, NM, 16CU, Clamp, GRD (1)
  • 3-Hole Splice PLT LEN5-3/8 Eg STL (1)
  • 3-Hole Splice PLT LEN5-3/8 STL (1)
  • 3IN 90D LT Noninsul GRND Conn Irn (1)
  • 3INCH Rigid LR Conduit Body (1)
  • 3X2X2-1/2, SWBX, STL, 12.5C, Gangable (1)
  • 3X2X2-1/4, SWBX, STL, 10.5C, Gngble, Cla (1)
  • 4 Gang Deep Box, 1IN & 3/4IN Ko'S (1)
  • 4 Oct BX Cover, STL, Flat, Duplex Rec. (1)
  • 4 SQ BX, STL, 21CU, 1/2&3/4E-Ko MS Arm (1)
  • 4 SQ BX, STL, 30CU, 1/23/4E-Ko MS Arm (1)
  • 4/0 20 Cu In Ceil BX W/Nails&GD Lu (1)
  • 4-11/16 SQ Surf CVR, 1 Duplex (1)
  • 4-11/16 SQ Surf CVR, Toggle (1)
  • 4-11/16 Square BX CVR, STL, 3CU, RSD (1)
  • 4-11/16 Square BX CVR, STL, 6.3CU, RSD (1)
  • 4-Gang BX, STL, 70CUIN, 1/23/4ko (1)
  • 4IN 90D LT Noninsul GRND Conn Irn (1)
  • 4IN-Octagon Box STL 22.5CU 3/4-Ko (1)
  • 4SQ CVR 1G, STL, 1/4IN RSD, 1cu (1)
  • 4SQ CVR 2-22/32 RND, 5.8CU, 1IN RSD (1)
  • 4SQ RNG 1-1/4IN RSD, RND 2-22/32 (1)
  • 4SQ RNG 1G, 1/4IN RSD, 1.5cu (1)
  • 4SQ RNG 2G, 1/4IN RSD, 2.3cu (1)
  • 4SQ Tile CVR 1G 3.5CU 1/2 RSD (1)
  • 4SQ Tile CVR 1G, 2IN RSD, 14.8cu (1)
  • 4SQ Tile CVR 2G 15.5CU 1-1/4 RSD (1)
  • 4SQ Tile CVR 2G, 1-1/2 RSD, 19cu (1)
  • 5/8IN Deep Two Device Support Cover (1)
  • 521711/23/4 W/Bow. Old Work Ear (1)
  • 5-Hole CRN PLT Len 5-3/8IN STL (1)
  • 6 Gang BX CVR, 13/16 RSD, 28.3 Cu-In (1)
  • 642P Tile Activation Kit BLK (1)
  • 68 FSC BRN Non-Met. Service Cover (1)
  • 68 SRC Bge Non-Metal Box Cover (1)
  • 68P Dual VLTG Kit 1DUP 4DATA Brass (1)
  • 90 Degree Fitting (2)
  • 90DEG FTG HT4.125 L1.625 Eg STL (1)
  • 90DEG FTG HT4-1/8IN LEN3-1/2IN SS (1)
  • Activation Kit 2, Rect. Floor Box (1)
  • Adapter Ring (1)
  • Adjustable Bar Hanger (2)
  • Adjustable Outlet Box (1)
  • Al JKTD XP FTG Hub 1/2 In .525-.650 (1)
  • Angle Plate Connector (1)
  • Angular Fitting (7)
  • Beam Clamp (5)
  • Bell Box (1)
  • Blank Device Plate Galv STL (1)
  • Box Cover (5)
  • Cable Gland (4)
  • Carpet Cover Plate, Brass, 1-Piece (1)
  • Carpet Plate and Cover (2)
  • Ceiling Box (4)
  • Ceiling Box Hvy Wall W/Bracket (1)
  • Ceiling Box Hvy Wall W/Ground Lug (1)
  • Ceiling Fan Box (1)
  • Ceiling Fan Outlet Box with Plastic Romex Connector (1)
  • CHNL 12GA 1-5/8X1-5/8 20FT PG STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT Eg STL (1)
  • CHNL 14GA 1-5/8X13/16 10FT HDG STL (1)
  • CHNL BK-BK 12GA 1-5/8X1-5/8 10FT Eg (1)
  • CHNL Nut 3/8-16IN STL (1)
  • CHNL-Beam CLP 3.5X3.5 B900/905/995 (1)
  • Clamp (1)
  • Concrete Box Cover (1)
  • Corner Plate (1)
  • Cover Assy. Double, Brass (1)
  • Cover Assy. Single Brown (1)
  • Cover Assy. Single, Brass (1)
  • Cushioned Clamp (1)
  • CVR PLT 3/4IN and 2IN NPS PLG Brass (1)
  • CVR PLT 3/4IN NPS PLG Brass (1)
  • Device Box (4)
  • Device Cover (4)
  • Diecast CV For 2 1/2-3INCH Body (1)
  • Duplex RCPT Dev PLT Galv STL (1)
  • End Cap (2)
  • Flat Fitting (1)
  • Flat Tee Plate Fitting (2)
  • Floor Box (2)
  • Floor Box Cover (5)
  • FLR Box CVR Duplex/Gfci-Brass (1)
  • FLR Box CVR, 1.25 Inch NPS-Brass (1)
  • Flush Service Floor Box (1)
  • GRND Clip Zincplt SPRNG STL Green (1)
  • Half-Slot Channel (17)
  • HD SLTD RT Ang CHNL 14GA 10FT STL (1)
  • Hex Head Cap SCR 3/8X1IN STN-STL (1)
  • HS CHNL 14GA 1-5/8X13/16 20FT Eg (1)
  • Insul.90 Deg Liquidtite GRD FTG 1/2 (1)
  • Liquid Tight 45° Connector (13)
  • Liquid Tight 45°Connector (13)
  • Liquid Tight 90° Connector (16)
  • Liquid Tight 90°Connector (16)
  • Liquid Tight Bullet (1)
  • Liquid Tight Flexible 90°Connector (1)
  • Liquid Tight Flexible Connector (6)
  • Liquid Tight Ground 45° Connector (1)
  • Liquid Tight Ground 45°Connector (1)
  • Liquid Tight Ground Connector (1)
  • Liquid Tight Straight Connector (19)
  • Masonry Box (3)
  • Mounting Bracket (1)
  • Multi-Gang DPLX CVR PLT 4.5X3IN BRS (1)
  • Nail On Ceiling Box (1)
  • Nail-On Zip Box (1)
  • New 1 Inch Straight Carflex Fitting (1)
  • Non-Metal Watertight Connector (1)
  • Non-Metallic Liquid Tight 90° Connector (3)
  • Non-Metallic Liquid Tight 90°Connector (3)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Fitting (2)
  • Octagon Box Cover (2)
  • Octagon Box Ext Ring 3-1/2IN STL (1)
  • Octagon Box Extension Ring (2)
  • Octagonal Box (11)
  • Old Work Box (7)
  • Old Work Box Support Clip (1)
  • Old Work Switch Box (1)
  • Outlet & Switch Box (3)
  • Outlet Box (27)
  • Outlet Box Cover (1)
  • Pan Box (1)
  • Phenolic SW. Box Res. (1)
  • Plate Cover Aluminum 60W Series (1)
  • Post Base (2)
  • RC Beam CLP Cond SZ 2IN Mall Iron (1)
  • RCS Beam OD1.050IN Nom SZ .75IN STL (1)
  • Reg SPR Stud Nut SZ 1/4X1IN STL (1)
  • Reg Spring Nut SZ 5/16IN STL (1)
  • RGD Cond CLP 1/2IN 14GA HDG Steel (1)
  • RGD Cond CLP 1/2IN 14GA STN-STL (1)
  • RGD Cond CLP 1-1/2IN 12GA STN-STL (1)
  • RGD Cond CLP 1-1/4IN 14GA HDG STL (1)
  • RGD Cond CLP 1-1/4IN 14GA STL (1)
  • RGD Cond CLP 1IN 14GA HDG STL (1)
  • RGD Cond CLP 2-1/2IN 12GA Aluminum (1)
  • RGD Cond CLP 2-1/2IN 12GA HDG STL (1)
  • RGD Cond CLP 2IN 12GA STN-STL (1)
  • RGD Cond CLP 3IN 12GA Aluminum (1)
  • RGD Cond CLP 3IN 12GA HDG Steel (1)
  • RGD Cond CLP 3IN 12GA STN-STL (1)
  • RGD Cond CLP 4IN 11GA HDG Steel (1)
  • RGD Cond CLP 6IN 11GA Eg Steel (1)
  • Ring, Sealing 1/2 Rubber W/STL (1)
  • Ring, Sealing 2 Inch Rubber W/STL (1)
  • Ring, Sealing -3/4 Rubber W/STL (1)
  • RND Recess CVR, BLK W/ Brass Flange (1)
  • Sealing Fitting (1)
  • Shallow Box (1)
  • Single Device 1/4 In Offset Raised (1)
  • SLTD CHNL 14GA 1-5/8X13/16 10FT Eg (1)
  • Spring Channel Nut (1)
  • Spring Nut (6)
  • SQ Box 30.3C 1/2 3/4E-Ko STL Armcbl (1)
  • SQ Box CVR 4X3/4IN RSD Pregalv STL (1)
  • SQ WSHR 1.5X1.5IN SZ 1/2IN STN-STL (1)
  • SQ WSHR 1.5X1.5IN SZ 3/8IN STN-STL (1)
  • Square Box (1)
  • Square Box Cover (3)
  • Square Box Extension Ring (4)
  • Square Device Cover (11)
  • Square Post Base (2)
  • Square Surface Cover (12)
  • Square Surface Cover -Steel (1)
  • Square Tile Cover (1)
  • Square Washer (4)
  • Standard Channel (23)
  • Steel Box Extension (1)
  • Steel Channel (2)
  • STL CVR 7.5CU-In 4-11/16, 1/2 Deep (1)
  • STL CVR 8.3CU-In 4-11/16X1-1/4raise (1)
  • STL Gangable Msnry Box 31.6 Cu-In (1)
  • STL Gangable Msnry Box 71.0 Cu-In (1)
  • Straight L.T. Conn. (1)
  • Strain Relief Connector (11)
  • Strain Relief Cord Connector (2)
  • Strut Strap (18)
  • SWBX, 12.5C, Gngble, SV-BRK NMCBL 3/4 (1)
  • Switch Box (14)
  • Swivel Hanger (1)
  • T Box (2)
  • Tee PLT HT 3-1/2IN Len 5-3/8IN HDG (1)
  • Thread Rod (3)
  • Three Hole Corner PLT STN STL (1)
  • Trapnut Strut Fastener 3/8 Silverga (1)
  • Univ CLP 14GA SZ 1-1/2IN OD1.738in (1)
  • Universal Clamp (6)
  • Universal Cone Nut (3)
  • Upright Fitting (4)
  • Utility Box (7)
  • Utility Box Cover (6)
  • Utility Box Extension Ring (1)
  • Weld 1.5 In DP BX C/W GRND Pigtail (1)
  • Wing Shape Fitting (1)
  • Zip Box (1)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (45)
  • Carlon (91)
  • Carlon / Nutek (1)
  • Carlon(R) (19)
  • Iberville (2)
  • Kindorf (19)
  • OCAL (7)
  • Red Dot (2)
  • Star Teck (2)
  • Steel City (239)
  • Superstrut (139)
  • T&B (1)
  • T&B Fittings (1)
  • T&B Ind Fitting (203)
  • T&B Liquidtight Fittings (5)
  • T&B Rigid Fittings (1)
  • Thomas & Betts (20)
  • Thomas&Betts-Abb Ins Prod (32)
  • Union Box/CVR (2)
  • Show More...

• Finish

  

  • Brass (2)
  • Electro Zinc Plated/Chromate Coating (34)
  • Electro Zinc Plated-Chromate Coated (1)
  • Electro-galvanized (18)
  • Electro-Plated (1)
  • Galvanized (10)
  • Galvanized-Krom (1)
  • Galvanized-Krom/Standard (7)
  • Galv-Krom/Standard (3)
  • Gold (6)
  • Gold Galvanized (12)
  • Gold Galvanized/Standard (5)
  • GoldGalv (4)
  • GoldGalv/Standard (13)
  • Green Urethane Powder (2)
  • Hot Dip Galvanized (5)
  • Hot-Dip Galvanized (4)
  • Hot-Dipped Galvanized (3)
  • Molded (3)
  • Molded;Electro Zinc (Locknut) (2)
  • Powder Coated (2)
  • Powder-coated (1)
  • Pre Galvanized (9)
  • Pre-Galvanized (152)
  • PVC Coated (2)
  • PVC Exterior Coating;Urethane Interior Coating (1)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Silver Galvanized (8)
  • Silver Galvanized/Electro-Galvanized (17)
  • SilverGalv (8)
  • SilverGalv/Electro-Galvanized (13)
  • Zinc Electroplated/Chromate Coating (53)
  • Zinc Plated (9)
  • Zinc Plating/Clear Chromate (8)
  • Show More...

• Material

  

  • 316 Stainless Steel (6)
  • Aluminum (19)
  • ALUMINUM ALLOY (3)
  • Aluminum Die Cast (1)
  • Brass (11)
  • Brass;Non-Metallic (1)
  • Carbon Steel (3)
  • Die Cast Zinc (1)
  • Die Cast Zinc/Galvanized Steel (1)
  • Die-Cast Aluminum (3)
  • IRON (1)
  • Low Carbon Steel (2)
  • Malleable Iron (78)
  • Metal (1)
  • Non-Metallic (45)
  • Nylon (4)
  • Plastic (1)
  • Plastic;Steel (Closure) (1)
  • Polyamide 6 (Body, cap);Neoprene (Sealing Ring) (1)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (9)
  • PVC (14)
  • Stainless Steel (27)
  • STAMPED STEEL (4)
  • Steel (336)
  • Steel (Closure);Vinyl (End Cover) (1)
  • Steel;Zinc plated Steel (Ground Cones);Thermoplastic Nylon (Seal Rings);Thermoplastic Nylon (Heat Curled Insulators);Malleable Iron (1)
  • Thermoplastic (26)
  • Zinc Die Cast (1)
  • Show More...

• Color

  

  • Aluminum (1)
  • Beige (2)
  • Black (15)
  • Black with Brass Flange (1)
  • Blue (51)
  • Brass (8)
  • Brown (7)
  • Caramel (1)
  • Dark Gray (2)
  • GB (1)
  • Gold (10)
  • Gray (16)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Green (1)
  • Ivory (1)
  • Metallic (9)
  • Red (1)
  • Red;Silver (1)
  • Silver (231)
  • Silver and red (1)
  • Slate (1)
  • Taupe (1)
  • White (2)
  • Yellow (8)
  • Show More...

• Capacity

  

  • 10.3 cu.in (1)
  • 10.5 cu.in (1)
  • 1000 lb (1)
  • 12 cu.in (1)
  • 12.5 cu.in (6)
  • 13 cu.in (2)
  • 13.5 cu.in (1)
  • 14 cu.in (4)
  • 14 ga (1)
  • 14.5 cu.in (3)
  • 15 cu.in (1)
  • 15.8 cu.in (9)
  • 16 cu.in (2)
  • 16.5 cu.in (1)
  • 1650 lb (3)
  • 17 cu.in (1)
  • 18 cu.in (8)
  • 19 cu.in (1)
  • 1900 lb (1)
  • 20 cu.in (5)
  • 20.5 cu.in (1)
  • 21 cu.in (7)
  • 2150 lb (1)
  • 22 cu.in (3)
  • 22.5 cu.in (4)
  • 2200 lb (1)
  • 25 cu.in (1)
  • 29.5 cu.in (1)
  • 30.3 cu.in (5)
  • 3000 lb (1)
  • 31.8 cu.in (1)
  • 32 cu.in (2)
  • 34 cu.in (1)
  • 35 cu.in (1)
  • 3500 lb (1)
  • 36 cu.in (1)
  • 4 cu.in (1)
  • 400 lb (1)
  • 42 cu.in (4)
  • 44 cu.in (1)
  • 47 cu.in (1)
  • 5 cu.in (13)
  • 52 cu.in (1)
  • 55 cu.in (1)
  • 550 lb (2)
  • 56.5 cu.in (1)
  • 58 cu.in (1)
  • 6 cu.in (2)
  • 60 cu.in (2)
  • 63.5 cu.in (1)
  • 7.5 cu.in (2)
  • 71 cu.in (1)
  • 750 lb (9)
  • 8 cu.in (2)
  • 800 lb (9)
  • 90 cu.in (1)
  • 900 lb (1)
  • 97.4 cu.in (1)
  • Show More...

• Number Of Gangs

  

  • 1 (45)
  • 2 (7)
  • 3 (6)
  • 4 (5)
  • Show More...

• Length

  

  • 0.59840 (1)
  • 1 in (1)
  • 1 in;25.4 mm (1)
  • 1.2008 (1)
  • 1.20080 (2)
  • 1.275 in;32.39 mm (1)
  • 1.338 in;33.99 mm (6)
  • 1.56 in (1)
  • 1.625 in (1)
  • 1.63 in (2)
  • 1.68 in (1)
  • 1.85 in (1)
  • 1.89 in (1)
  • 1.959 in (1)
  • 10 ft (27)
  • 101.6 mm (21)
  • 10-5/8 in (1)
  • 11.4 in (2)
  • 1-1/16 in;27 mm (1)
  • 1-1/2 in (1)
  • 1-15/16 in (2)
  • 119.063 mm (2)
  • 120 (12)
  • 1-21/32 in;42.1 mm (3)
  • 1-25/32 in (3)
  • 1-3/4 in (3)
  • 1-3/8 in (1)
  • 13/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (2)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/32 in;29.4 mm (1)
  • 1-5/8 in (4)
  • 16 in;406 mm (1)
  • 1-7/8 in (1)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (3)
  • 2 in (1)
  • 2.235 in;59.31 mm (1)
  • 2.3 in (1)
  • 2.3 in (Body) (1)
  • 2.6 in (1)
  • 2.92 in;74.2 mm (2)
  • 20 ft (3)
  • 2-1/2 in (1)
  • 2-1/8 in (2)
  • 2-23/32 in;69.1 mm (4)
  • 2-3/16 in (2)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-3/32 in;53.2 mm (2)
  • 2-3/8 in (3)
  • 240 (12)
  • 2-5/16 in (1)
  • 3 in (15)
  • 3.55 in;90.17 mm (1)
  • 3.65 (1)
  • 3.65 in;92.7 mm (1)
  • 3.69 in;93.6 mm (2)
  • 3.76 in;95.4 mm (1)
  • 3.8 in;96.5 mm (1)
  • 3-1/2 in (8)
  • 3-1/2 in;88.9 mm (1)
  • 3-1/4 in (1)
  • 3-1/4 in;82.6 mm (5)
  • 3-3/4 in (2)
  • 3-3/4 in;95.3 mm (3)
  • 3-3/8 in;85.7 mm (1)
  • 3-5/8 in (2)
  • 3-7/8 in (1)
  • 4 in (15)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (24)
  • 4.01 in;101.8 mm (1)
  • 4.3 in;109.2 m (1)
  • 4.30 in;109.22 mm (1)
  • 4.56 in (1)
  • 4.62 in;117.3 mm (1)
  • 4-1/16 in (1)
  • 4-1/2 in (3)
  • 4-1/2 in;114.3 mm (3)
  • 4-1/4 in (1)
  • 4-1/8 in (1)
  • 4-1/8 in;104.775 mm (1)
  • 4-11/16 in;119.063 mm (6)
  • 4-9/16 in (2)
  • 5.50 in (1)
  • 5.66 in;143.7 mm (1)
  • 5.78 in;146.9 mm (1)
  • 5-1/2 in;139.7 mm (2)
  • 5-13/16 in;147.6248 mm (1)
  • 5-3/8 in (7)
  • 5-5/8 in;142.875 mm (1)
  • 6 in (1)
  • 6 in (Base) (1)
  • 6.5 (1)
  • 6.625 in (1)
  • 7.31 (1)
  • 7.46 in;189.5 mm (1)
  • 7.57 in;192.278 mm (1)
  • 7.62 in;193.7 mm (1)
  • 7-1/4 in (2)
  • 7-3/8 in;193.675 mm (1)
  • 8-13/16 in (1)
  • 8-5/8 in;219.1 mm (1)
  • Show More...

• Shape

  

  • Octagon (15)
  • Rectangular (62)
  • Round (13)
  • Square (95)
  • Show More...

• Width

  

  • .94 in (1)
  • 0.785 in;19.9 mm (7)
  • 0.81 in (1)
  • 1 in (2)
  • 1.25 in (1)
  • 1.311 in (1)
  • 1.338 in (2)
  • 1.338 in;33.99 mm (3)
  • 1.5 in (5)
  • 1.625 in (5)
  • 1.75 (1)
  • 101.6 mm (21)
  • 1-1/2 (2)
  • 1-1/2 in (3)
  • 1-1/4 in (1)
  • 119.063 mm (2)
  • 12 in (1)
  • 1-3/4 in (1)
  • 1-5/8 (32)
  • 1-5/8 in (24)
  • 2 in (14)
  • 2.06 in;52.2 mm (2)
  • 2.11 in;53.594 mm (1)
  • 2.25 (1)
  • 2.25 in;57 mm (2)
  • 2.25 in;57.2 mm (1)
  • 2.26 in;57.3 mm (1)
  • 2.30 in;58.4 mm (1)
  • 2.8 in (1)
  • 2.9 in;73.7 mm (1)
  • 2.92 in;74 mm (1)
  • 2-1/2 in (2)
  • 2-1/2 in;63.5 mm (1)
  • 2-1/32 in (1)
  • 2-1/4 in (1)
  • 2-1/4 in;57.15 mm (1)
  • 2-1/8 in (13)
  • 2-11/16 in;68.2498 mm (1)
  • 2-13/16 in (1)
  • 2-3/8 in (1)
  • 3 in (3)
  • 3 in;7.62 cm (2)
  • 3.53 in;89.7 mm (2)
  • 3.56 in;90.424 mm (1)
  • 3.69 in;93.6 mm (2)
  • 3-1/2 in (4)
  • 3-1/8 in;79.375 mm (1)
  • 3-5/8 in;92.075 mm (1)
  • 3-7/16 in (1)
  • 3-7/16 in;87.2998 (1)
  • 4 (3)
  • 4 in (2)
  • 4 in;101.5 mm (2)
  • 4 in;101.6 mm (23)
  • 4.36 in;110.7 mm (1)
  • 4.5 in (1)
  • 4.62 in;117.3 mm (1)
  • 4-1/2 in;114.3 mm (1)
  • 4-11/16 in (2)
  • 4-11/16 in;119.063 mm (6)
  • 4-5/8 in (1)
  • 5.80 in (1)
  • 5-3/8 in (1)
  • 5-7/8 in (1)
  • 6 in (1)
  • 6 in (Base);3-5/16 (Post) in (1)
  • 7/16 in (1)
  • Show More...

• For Use With

  

  • 3/8 in Wall Board and Plaster;1/2 in Wall Board and Plaster;5/8 in Wall Board and Plaster (2)
  • 4 in Square Outlet Box;One 30 or 50 Amp Dryer;Range Receptacle (1)
  • 4 in Square Outlet Box;One 4-Wire Twist-Lock Single Receptacle (1)
  • 4 in Square Outlet Box;One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Duplex Receptacle (1)
  • 4 in Square Outlet Box;One Ground Fault Receptacle and One Toggle Switch (1)
  • 4 in Square Outlet Box;One Single Flush Receptacle (1)
  • 4 in Square Outlet Box;One Toggle Switch (1)
  • 4 in Square Outlet Box;One Toggle Switch and One Duplex Flush Receptacle (1)
  • 4 in Square Outlet Box;Two Duplex Flush Receptacles (1)
  • 4 in Square Outlet Box;Two Ground Fault Receptacles (1)
  • 4 in Square Outlet Box;Two Toggle Switches (1)
  • 4 in. Square and 4-11/16 in. Boxes;1-1/2 in. and 2-1/8 in. Deep (1)
  • 4-Wire Twist-Lock Single Flush Receptacle (1)
  • 68 and 600 Series Floor Boxes (1)
  • 68 P Floor Box (3)
  • A and C Series Channel and Inserts (5)
  • A-1200 & A-1400 Series Channel (1)
  • A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (1)
  • A-1200, B-1200, C-1200, A-1400, B-1400 and B-1402 Series Channels (1)
  • A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • All Kind or F Channels (1)
  • B 900;B 905;B 906 and B 907 Series Channel (1)
  • B Series Channel and Inserts (1)
  • B-1400 Series Channel (1)
  • Cable Tray (7)
  • Carflex Conduit and Carflex X-Flex Conduit (3)
  • Conduit (44)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components and Terminal Blocks in Dry, Damp and Wet Locations (2)
  • Drywall (1)
  • Electrical Non-Metallic Tubing (EMT) or Non-Metallic Sheathed Cable (1)
  • General Control and Power Cable Applications (2)
  • Jacketed Metal Clad Cable (1)
  • Kind or F Channels (2)
  • Liquid Tight Flexible Metal Conduit (20)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (3)
  • Liquid-Tight Flexible Metallic Conduit (33)
  • Liquidtight Flexible Non-Metallic Conduit Type A (5)
  • Non-Metallic Sheathed Cable (14)
  • Non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (1)
  • Non-Metallic Wiring System (3)
  • On Grade/Below Grade Application;Power;Data;Communications (2)
  • One 30 or 50 Amp Dryer;Range Receptacle (1)
  • One Gang Utility Box (5)
  • Plaster (2)
  • Power or Communications and Data (1)
  • Residential;Home Office (1)
  • Rigid Conduit and Pipe (1)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (17)
  • Round Floor Box Covers (1)
  • Seals Sections of Conduit Runs from Passage of Vapors;Flame and Gases (1)
  • Single Receptacle (1)
  • Square Boxes (27)
  • Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit;Armored Cable and Flexible Metal Conduit (1)
  • Tile and Carpet Applications (4)
  • Tile and Carpet Applications;Doors (1)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • Two Single Flush Receptacles (1)
  • Wall Only with Non-Metallic Wiring System (2)
  • Show More...

• Height

  

  • 0.238 in;6.1 mm (3)
  • 0.358 in (2)
  • 0.358 in;9.1 mm (4)
  • 0.55 in;13.97 mm (1)
  • 0.559 in;14.2 mm (1)
  • 0.673 in;17.1 mm (2)
  • 1.250 in (2)
  • 1.5 in (1)
  • 1.6 in;40.5 mm (1)
  • 1/2 in (3)
  • 1/2 in;12.7 mm (13)
  • 1-1/2 in (3)
  • 1-1/2 in;38.1 mm (15)
  • 1-1/2;38.1 mm (1)
  • 1-1/4 in (1)
  • 1-15/16 in (1)
  • 12.7 mm (1)
  • 13/16 in (5)
  • 1-5/8 in (18)
  • 1-5/8 in;41.3 mm (1)
  • 1-7/8 in (2)
  • 2 in (2)
  • 2 in;50.8 mm (1)
  • 2.30 in;58.4 mm (1)
  • 2.4 in;61 mm (1)
  • 2.55 in;64.9 mm (1)
  • 2.63 (1)
  • 2.7 in;68.6 mm (1)
  • 2.74 in;69.5 mm (1)
  • 2.74 in;69.7 mm (1)
  • 2.78 in;70.7 mm (1)
  • 2.81 (1)
  • 2.83 in;71.8 mm (1)
  • 2.89 in (1)
  • 2.98 in;75.6 mm (2)
  • 2-1/16 in (1)
  • 2-1/2 in (8)
  • 2-1/4 in (7)
  • 2-1/8 in (4)
  • 2-1/8 in;53.975 mm (6)
  • 2-1/8;53.975 mm (4)
  • 2-11/16 in;68.2498 (1)
  • 2-15/16 in (1)
  • 2-3/4 in (4)
  • 2-5/16 in;74.5998 mm (1)
  • 3 in (2)
  • 3.04 in;77.2 mm (1)
  • 3.18 in;80.6 mm (1)
  • 3.26 in;82.9 mm (1)
  • 3.32 in;84.3 mm (1)
  • 3.45 in;87.7 mm (1)
  • 3.5 in (3)
  • 3.5 in;88.9 mm (1)
  • 3.50 in;88.9 mm (1)
  • 3.59 in;91.2 mm (1)
  • 3.69 in;93.7 mm (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 3-1/2 in (10)
  • 3-1/2 in (Post) (1)
  • 3-1/4 in;8.25 cm (2)
  • 3-11/16 in;93.6498 mm (1)
  • 3-3/4 in (3)
  • 3-3/4 in;95.25 mm (1)
  • 3-5/8 in;92.075 mm (2)
  • 3-9/16 in (1)
  • 4 (3)
  • 4 in (1)
  • 4 in;101.6 mm (1)
  • 4-1/8 in (2)
  • 5.40 in (1)
  • 7/32 in (1)
  • Show More...

• Knockout Size

  

  • 0.755 in (1)
  • 1 in (Side);1 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1 in (Side);3/4 in (Side);1 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom);1 in (Bottom) (1)
  • 1/2 in (31)
  • 1/2 in (Side);1/2 in (End);3/4 in (Bottom);1/2 in (Bottom) (2)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom) (1)
  • 1/2 in (Side);1/2 in (End);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in (Side);3/4 to 33/64 in (Side);1/2 in (End);3/4 to 33/64 in (End);1/2 in (Bottom);3/4 in (Bottom) (1)
  • 1/2 in;3/4 in (10)
  • 1-1/2 in (Side);1-1/2 in (End);2-1/2 in (Bottom) (4)
  • 1-1/4 in (Side);1-1/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (1)
  • 3/4 in (5)
  • 3/4 in (Side);3/4 in (End);3/4 in (Bottom);1/2 in (Bottom) (4)
  • Show More...

• Thickness

  

  • 0.112 in (2)
  • 0.322 in;0.817 cm (2)
  • 0.38 in (1)
  • 0.8 in (1)
  • 1/4 in (19)
  • 11 ga (2)
  • 11 Gauge (2)
  • 11/64 in (1)
  • 12 AWG (17)
  • 12 ga (7)
  • 12 GAUGE (3)
  • 14 AWG (8)
  • 14 ga (14)
  • 14 GAUGE (2)
  • 15/64 in (2)
  • 16 ga (1)
  • 3/16 in (5)
  • 3/8 in (1)
  • 5/16 in (1)
  • 7/32 in (1)
  • Show More...

• Number Of Hubs

  

  • 3 (1)
  • 4 (1)
  • Show More...

• Number Of Knockouts

  

  • 1 (3)
  • 10 (3)
  • 11 (2)
  • 13 (5)
  • 16 (4)
  • 17 (4)
  • 2 (1)
  • 20 (1)
  • 22 (1)
  • 24 (1)
  • 3 (6)
  • 4 (11)
  • 5 (3)
  • 6 (5)
  • 7 (5)
  • 8 (2)
  • Show More...

• Number Of Outlets

  

  • 1 (127)
  • 3 (3)
  • 4 (2)
  • Show More...

• Angle

  

  • 120 ° (2)
  • 90 ° (7)
  • Show More...

• Size

  

  • 1 (1)
  • 1 in (6)
  • 1 INCH (30)
  • 1 X 3/4 (1)
  • 1/2 in (15)
  • 1/2 INCH (38)
  • 1/4 in (6)
  • 1/4 INCH (1)
  • 10-5/8 Inches Length x 4-11/16 Inches Width (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 1-5/8 Inches Depth (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • 1-1/2 (1)
  • 1-1/2 in (3)
  • 1-1/2 INCH (14)
  • 1-1/2 Inches (1)
  • 1-1/4 in (3)
  • 1-1/4 INCH (16)
  • 1-1/4 Inches (4)
  • 14-4/4 Inches Length x 4-11/16 Inches Width (1)
  • 2 (3)
  • 2 in (4)
  • 2 INCH (15)
  • 2 Inches (3)
  • 2 Inches Height x 3 Inches Width x 7/8 Inches Depth (1)
  • 2-1/2 (1)
  • 2-1/2 in (1)
  • 2-1/2 Inch (6)
  • 2-1/2 Inches (3)
  • 24 Inches (1)
  • 3 (1)
  • 3 in (2)
  • 3 INCH (8)
  • 3 Inches (4)
  • 3 Inches Height x 2 Inches Width x 1-1/2 inches depth (1)
  • 3 Inches Height x 2 Inches Width x 2-1/2 inches depth (8)
  • 3 Inches Height x 2 Inches Width x 2-1/4 inches depth (2)
  • 3 Inches Height x 2 Inches Width x 2-3/4 inches depth (6)
  • 3 Inches Height x 2 Inches Width x 3-1/2 inches depth (4)
  • 3/4 (1)
  • 3/4 in (10)
  • 3/4 INCH (29)
  • 3/8 in (9)
  • 3/8 INCH (9)
  • 3-1/2 in (1)
  • 3-1/2 Inches (3)
  • 3-1/2 Inches Diameter x 1-1/2 Inch depth (2)
  • 3-1/2 Inches Diameter x 1-1/2 Inches Depth (1)
  • 3-1/4 Inches Diameter x 1/2 Inch depth (1)
  • 3-3/4 Inches Length x 1-15/16 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 1-15/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 1-7/8 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 3-1/2 Inches Depth (2)
  • 3-3/4 Inches Length x 5-9/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 7-3/8 Inches Width x 3-1/2 Inches Depth (1)
  • 4 in (1)
  • 4 INCH (8)
  • 4 Inches (56)
  • 4 Inches Diameter x 1/2 Inch depth (11)
  • 4 Inches Diameter x 2-1/8 Inches depth (4)
  • 4 Inches Diameter x 3-1/2 Inches Depth (1)
  • 4 Inches Diameter x 4 Inches Depth (2)
  • 4 Inches Length x 2-1/8 Inches Width (7)
  • 4 Inches Length x 2-1/8 Inches Width x 1-1/2 Inches Depth (1)
  • 4 Inches Length x 2-1/8 Inches Width x 1-7/8 Inches Depth (3)
  • 4 Inches Length x 2-1/8 Inches Width x 2-1/8 Inches Depth (3)
  • 4 Inches Length x 4 Inches Width (2)
  • 4 Inches Length x 4 Inches Width x 1-1/2 Inches Depth (6)
  • 4 Inches Length x 4 Inches Width x 2-1/8 Inches Depth (1)
  • 4-1/8 Inches Length x 2-1/2 Inches Width x 1-15/16 Inches Depth (1)
  • 4-11/16 Inches (20)
  • 4-11/16 Inches Length x 4-11/16 Inches Width x 1-1/2 Inches Depth (1)
  • 4-11/16 Inches Length x 4-11/16 Inches Width x 2-1/8 Inches Depth (1)
  • 6 Inches (1)
  • 7 Inches Length x 4-11/16 Inches Width (1)
  • 8-13/16 Inches Length x 4-11/16 Inches Width (1)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 1-5/8 Inches Depth (1)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • Length from 10-1/2 Inches to 18-1/2 Inches (1)
  • Length from 14-1/2 Inches to 26-1/2 Inches (2)
  • Show More...

• Mounting Type

  

  • Adjustable Bar Hanger (2)
  • Angled Side Nails (2)
  • Bracket (1)
  • Bracket Mount (1)
  • Captive Nails (1)
  • Compound Angled Nails (1)
  • Ear Flush Mount (2)
  • Ear Mount (4)
  • Horizontal Mount (1)
  • L Bracket (1)
  • Lag Screw Mount (1)
  • Lug Mount (2)
  • Molded Ear #4 Swing Bracket (1)
  • Mounting Ear & Swing Clamp (1)
  • Mounting Ears & (2) Swing Clamps (2)
  • Mounting Ears And Captive Nails (1)
  • Nail and Bracket Support (1)
  • Nail Mount (7)
  • Nail-On (4)
  • Screw Mount (10)
  • Surface Mount (25)
  • Swing Clamps (1)
  • Vertical Mount (17)
  • Wall Mount (1)
  • Wall Mount;Ceiling Mount (42)
  • Show More...

• Center Spacing

  

  • 1-1/2 in (2)
  • 1-1/8 in (3)
  • 2 in (17)
  • Show More...

• Hole Size

  

  • 1 in (1)
  • 3/4 in (2)
  • 9/16 in (13)
  • Show More...

• Connection Type

  

  • 90° (1)
  • NPT (1)
  • Straight (22)
  • Threaded (63)
  • UNC (10)
  • Show More...

• Enclosure Type

  

  • Nema 4 (1)
  • NEMA 6 and 4X (4)
  • Type 4 / 4X (1)
  • Type 4X (3)
  • Show More...

• Connection Size

  

  • 1/2 in - 13 (3)
  • 1/4 in - 20 (2)
  • 3/8 in - 16 (5)
  • 3/8 in - 16 UNC (1)
  • Show More...

• Slot Size

  

  • 9/16 in (2)
  • 9/16 x 1-1/8 in (17)
  • Show More...

• Hub Size

  

  • 0.75 (1)
  • 1 (2)
  • 1/2 in (1)
  • 2-1/2 to 3 (1)
  • 3 (1)
  • 3/4 (1)
  • 3/4 in (1)
  • Show More...

• Sub Brand

  

  • ABB (60)
  • Carlon (3)
  • Carlon(R) (38)
  • Kindorf(R) (16)
  • Red Dot (1)
  • Shureseal(TM) (11)
  • Snap Guard(R) (1)
  • Steel City (38)
  • Steel City(R) (60)
  • Superstrut(R) (71)
  • Thomas & Betts (1)
  • Show More...

• Number Of Holes

  

  • 0 (12)
  • 1 (13)
  • 12 (1)
  • 2 (4)
  • 3 (7)
  • 4 (11)
  • 5 (2)
  • 9 (1)
  • Show More...

• Special Features

  

  • (2) Nails Included (1)
  • 3/4 in. and 1 in. knockouts provide application flexibility (1)
  • 7.5 cu.in Capacity (1)
  • A Rugged Polycarbonate Construction to Withstand Extreme Temperatures;(2) 6-20 x 1-1/2 in Pan Head Screw;Swing Clamp Included (1)
  • Accepts all standard device covers and tile rings and is available in all box sizes and conduit styles (3)
  • Accepts wire sizes: 12/14,11/12, 10/10 (1)
  • Accepts wire sizes: 23/14, 20/12, 18/10 (1)
  • Accommodates #12 and #14 copper and #12 aluminum solid conduction in non-metallic sheathed cable (1)
  • Activation kit includes components to accommodate all standard power, data and communications devices plus a divider to separate power from data and communications (1)
  • All Springs shall Mechanically Attached to Channel Nut (6)
  • Alloy A380 aluminum, certified zinc alloy and stainless steel springs provide increased corrosion resistance (4)
  • Assembly includes steel clamp with bolt/locknut and cushion (5)
  • Assembly Includes Steel Clamp With Bolt/Locknut and Cushion;To Secure Pipes, Tubes and Hoses For Fluid Conductors;Candle Temperature from -40 to +300°F (1)
  • Attaches 4 in and 4-11/16 Inch Electrical Boxes to Metal Stud;Support Leg Can Be Attached to Stud to Eliminate Movement of Box in Wall;Attaches to Metal or Wood Stud Using Self-Tapping Screws and Screw Gun or Nails (1)
  • Bolt head is combination slot and hex head for flexibility of attachment (44)
  • Cable clamps (1)
  • Can be mounted to any height to meet individual project requirements (1)
  • Can be used with both Steel and Wood Stud;Speeds Installation Time (12)
  • Capacity: 3/4 in. hub for power wiring and 1-1/4 in. hub for communications cabling, plugs are included (1)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (5)
  • Claws provide temporary support for proper positioning until permanently installed (3)
  • Clean cover edges help provide good gasket sealing (1)
  • Clips to plaster, drywall, concrete block, brick or concrete (1)
  • Color-Coded Thread Protectors for Easy Identification of Conduit Size (5)
  • Concrete tight, fully adjustable with electro galvanized body and hardware (2)
  • Continuous Thread (3)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (53)
  • Cover Screws Supplied with Box (1)
  • Designed for fan or fixture mounted directly onto the joist (1)
  • Designed so that the maximum number of support and framing applications can be constructed with a minimum amount of labor and pieces (24)
  • Die cast adjusting ring with unique snap-on feature which eliminates gluing (1)
  • Drawn Style Box (1)
  • Dual Voltage Capability;Accepts a Two Gang Faceplate;Backless Design Accommodates Large/Deep Low Voltage Devices;Eliminates Cutting the Backs off Electrical Boxes;Accommodates Bend Radius Requirements for Low Voltage Cabling;Provides Ample Space for Insta (1)
  • Easier Installation, Greater Performance and Lower Installation Cost (2)
  • Easier Installation;Greater Performance and Lower Installation Cost (16)
  • Easy to install (2)
  • Easy to install, quick connect (1)
  • Easy to Install;Quick Connect (3)
  • Easy to Install;Quick Connect with Bracket (1)
  • Eliminates extension cords running across the floor from wall outlets (1)
  • Excellent corrosion reisistance (12)
  • Excellent Corrosion Resistance (16)
  • Excellent Pullout Strength;Robust Metallic Construction (1)
  • Extended Range with Superior Strain Relief;Reduced Overall Size, Fits Into tighter Spaces;Gland Nut Designed to Restrict Cable Bending (2)
  • Factory Provided Raised Ground Screw Location (7)
  • Fewer parts, less installation time..results - Labor Savings! (1)
  • Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws (6)
  • Galv Krom finish which out performs other finishes (1)
  • Galv-Krom finish provides superior corrosion protection (1)
  • Gasketed for a watertight seal (3)
  • Hardened points bite into beam flange (1)
  • Hardware Included with Box;Made of Steel, Drawn Construction (1)
  • High clamps (2)
  • High clamps and #40 ground strap (1)
  • High Impact Resistant (4)
  • High impact resistant thermoplastic (2)
  • Holes between gangs are spaced on 1-3/16 inch centers (3)
  • Includes 1-1/4 Inches long screws for mounting (1)
  • Includes captivated Phillips head screws (7)
  • Integrated carpet plate and duplex floor plate in one unit (2)
  • Kindorf Self Aligning Channel Nuts are Designed to Provide Resistance to Pull Out and Resistance to Side Slip in Excess of the Full Strength of the Channels with Which They are Used (3)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (8)
  • Kit includes box, cover, duplex receptacle, new and old work brackets, green ground screw and mounting hardware (1)
  • Kit includes box, cover, duplex receptacle, new and old work brackets, sealant and mounting hardware (1)
  • Large Cable Clamping Range;Liquid Tight Mechanical Grip;Full Length Busing Seal Protects Cable;Extended Pull Out Performance;Corrosion Resistant (3)
  • Large knockout for #6 or #8 cable (1)
  • Largest Wire Fill Capacity in their Class (3)
  • Load ratings as shown have a safety factor of 3 in 3000 lb. hard rock concrete (1)
  • Long-Lasting Durability (1)
  • Made of Steel (21)
  • Made of Steel, Drawn Construction (1)
  • Made of Steel, Welded Construction (9)
  • Made of Steel. Drawn Construction (13)
  • Made of Steel;Includes CV Bracket (1)
  • Maximum Flexibility In Tight Applications (4)
  • Maximum Volume for Bends within a Compact Overall Size (1)
  • Minimum of Five Full Threads;Integral Bushing (1)
  • Molded fast clamps (1)
  • Molded V clamps with installed ground strap (1)
  • Mounts all types of wall material up to 1-1/2 inch maximum thickness (1)
  • NG boxes have 1/2 Inch offset wallboard flange and V-type cable entry. (1)
  • Non-Corrosive (1)
  • One size fits all strut depths (3)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (7)
  • One-step installation method, no glue required (2)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • Patented Design Allows for Adjustment from 0 in to 1-3/4 in After Installation (1)
  • Patented design allows for adjustment from 0 in. to 1-3/4 in. after installation (3)
  • Patent-pending design, rugged steel construction similar to standard mud ring but with greater flexibility (2)
  • Precision Cast and Machined Surfaces Permit Safer Wire Pulling. (1)
  • PVC construction for easier installation, greater performance and lower installation cost (5)
  • Redesigned to Custom Fit Both 1-1/2 In. and 1-5/8 In. Channels (6)
  • Red-painted version available for quick and easy identification of life safety electrical systems (1)
  • Residential floor box kit that includes a Steel City switch box, cover flange and receptacle (1)
  • Resists flexing and holds their shape even in the worst applications (3)
  • Retained Stainless Steel Cover Screws (1)
  • Safety Factor = 4 (2)
  • Screws concealed under doors (6)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • SilverGalv finish will not chip or peel (1)
  • Sturdy Cable Sealing Mechanism Which Results in Superior Strain Relief (1)
  • Superblue Boxes Combine the Features of the Hard Shell Thermoset Box and the Thermoplastic PVC Style Box to Create a New Rigid Non-Metallic Wiring Box (2)
  • Supports Threaded Rod;Threaded Brindle Rings and Electrical Boxes (1)
  • T-Box Uses 6-32 x 3/4 in Screw (1)
  • The Maximum Number of Support and Framing Applications can be Constructed with a Minimum Amount of Labor and Pieces (25)
  • The Smooth Inner Surface Ensures that Cables and Conductors Can Be Fed Through Very Easily (4)
  • Three way power, data, and communications plus easy double or triple ganging (1)
  • Three way versatility for power, data, and communications (1)
  • UL Listed Type 4X and NEMA 4X Rating for Excellent Protection In Wash Down Areas, As Well As Harsh Outdoor Environments Exposed to Moisture, Rain, Ice or Snow (2)
  • Unique cover provides aesthetic recessed service (3)
  • Show More...

• Diameter

  

  • 0.90 in (1)
  • 1 in;25.4 mm (1)
  • 1.27 in (1)
  • 1.40 in;35.6 mm (2)
  • 1.46 in (2)
  • 1.48 in (2)
  • 1.5 in;37.5 mm (1)
  • 1.57 in (1)
  • 1.71 in;43.4 mm (1)
  • 1.74 in (1)
  • 1.76 in (2)
  • 101.6 mm (2)
  • 11/16 in;27 mm (1)
  • 1-1/2 in (1)
  • 1-1/8 in (2)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-13/32 in (Hole) (1)
  • 1-19/35 in (Hole) (1)
  • 1-21/32 in;42.1 mm (4)
  • 1-3/8 in (4)
  • 1-3/8 in;34.9 mm (5)
  • 15/16 in;23.8 mm (1)
  • 15/16 in;33.3 mm (1)
  • 1-5/16 in;33.3 mm (1)
  • 15/32 in;29.4 mm (1)
  • 1-5/8 in (1)
  • 1-7/32 in (2)
  • 17/8 in;47.6 mm (1)
  • 1-7/8 in;47.6 mm (5)
  • 2.10 in (1)
  • 2.440 in;61.98 mm (1)
  • 2-23/32 in;69.1 mm (3)
  • 23/16 in;55.6 mm (1)
  • 2-3/16 in;55.6 mm (1)
  • 23/32 in;53.2 mm (1)
  • 2-5/16 in (1)
  • 25/32 in (Hole) (1)
  • 3 in;76.2 mm (1)
  • 3-1/4 in (1)
  • 31/4 in;82.6 mm (1)
  • 3-1/4 in;82.6 mm (5)
  • 31/8 in;79.4 mm (1)
  • 3-1/8 in;79.4 mm (1)
  • 3-15/16 in (1)
  • 3-3/8 in;85.7 mm (1)
  • 4 in (2)
  • 4 in;101.6 mm (18)
  • 4.38 in;111.2 mm (1)
  • 4.93 in (1)
  • 4-1/2 in;114.3 mm (1)
  • 5.11 in (1)
  • 5.50 in (1)
  • 5.69 in (4)
  • 5-1/2 in;139.7 mm (1)
  • Show More...

• Application

  

  • Act As Pull Outlets for Conductors Being Installed (2)
  • Act as Pull Outlets, Provide Access to Conductors for Maintenance and Future System Changes (1)
  • Approved for connecting bonding jumper from receptacle to grounded metal device box (1)
  • Approved for indoor and outdoor applications (1)
  • Armored Cable and Flexible Metal Conduit (1)
  • Armored/Metal Clad Cable (1)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (7)
  • Can Be Installed in The Same Stud Cavity of a Shared Two-Hour Wall (1)
  • Can be installed in the same stud cavity of a shared two-hour wall. (1)
  • Concrete Box Cover Plate (1)
  • Conduit (45)
  • Conduit;Non-Metallic Sheathed Cable (1)
  • Designed and listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code (28)
  • Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations (2)
  • Dry-Tite Boxes and Covers Protect Wiring Devices;Switches;Electronic Components;Terminal Blocks in Dry;Damp and Wet Locations (2)
  • For 4-wire twist-lock single flush receptacle (1)
  • For casting into concrete walls, floors or ceilings to provide for attachment anywhere along the continuous slot (2)
  • For conduits and cables (2)
  • For Connections and Strain Relief in Cramped Spaces (1)
  • For Hazardous Locations (1)
  • For Mounting Pipe or Conduit Parallel to the Beam (1)
  • For single receptacle (1)
  • For tile and carpet applications (10)
  • For use in fire alarm systems (1)
  • For use in metal framing applications (15)
  • For use with #3330-30A 250 V twist-lock receptacle (1)
  • For use with 3/8 inch, 1/2 inch & 5/8 inch wall board and plaster (3)
  • For use with 4 in. square and 4-11/16 in. boxes, 1-1/2 in. and 2-1/8 in. deep (1)
  • For use with 4 inch and 4-11/16 inch boxes (1)
  • For use with 4 inch square boxes (1)
  • For use with 61W, 62W, 640P, 640, 840 and 740 series floor boxes (3)
  • For use with 640 and 840 series floor boxes (1)
  • For use with 640 P and 740 series floor boxes (1)
  • For use with 664 SC and 664 CI floor boxes (2)
  • For use with 68 and 600 series floor boxes (5)
  • For use with 68 P floor box (6)
  • For use with 68 P round floor box (5)
  • For use with A and C series channel and inserts (7)
  • For use with A Series Channel (1)
  • For use with a two device square cut tile wall cover, 1/2 inch, 3/4 inch or 1 inch raised (1)
  • For use with A-1200, A-1400, B-1200, B-1400, C-1200 and B-1402 Series Channel (2)
  • For use with A-1202, A-1402, C-1202 and H-1200 Series Channel (1)
  • For use with all A and C series channels (1)
  • For use with all A Series Channel (1)
  • For use with all Kindorf channels (4)
  • For use with armored/metal clad cable (3)
  • For use with B series channel and inserts (1)
  • For use with Carflex conduit and Carflex X-Flex conduit (6)
  • For use with channel and channel fittings (2)
  • For use with conduit (21)
  • For use with conduit or pipe (5)
  • For use with drywall (3)
  • For use with E976RFB floor box (1)
  • For use with EMT conduit (1)
  • For use with Kindorf channels (1)
  • For use with non-metallic sheathed cable (6)
  • For use with non-metallic sheathed cable and flexible cord (1)
  • For use with non-metallic wiring systems only (1)
  • For use with one 30 or 50 Amp dryer or range receptacle (2)
  • For use with one 4-wire twist-lock single receptacle (2)
  • For use with one duplex flush receptacle (2)
  • For use with one ground fault receptacle (1)
  • For use with one ground fault receptacle and one duplex receptacle (1)
  • For use with one ground fault receptacle and one toggle switch (1)
  • For use with one single and one duplex flush receptacle (1)
  • For use with one single flush receptacle (1)
  • For use with one toggle switch (2)
  • For use with one toggle switch and one duplex flush receptacle (1)
  • For use with one toggle switch and one single receptacle (1)
  • For use with receptacle NBR 7112, 30 amp, 3 wire, and NBR 9430, 30 or 50 amp, 4 wire (1)
  • For use with Rigid Conduit and Pipe (7)
  • For use with rigid/IMC conduit (1)
  • For use with round and octagon boxes (3)
  • For use with round boxes (1)
  • For use with round floor box covers (1)
  • For Use with Series A & B Conduit Body (1)
  • For use with the conduits (3)
  • For use with two duplex flush receptacles (2)
  • For use with two ground fault receptacles (1)
  • For use with two single flush receptacles (1)
  • For use with two toggle switches (1)
  • Hanging Rod (1)
  • Hardened Points Bite Into Beam Flange;Fits All I-Beams Where Edge of Beam Flange Does Not Exceed 0.8 In. Thickness (1)
  • Hazardous Location (2)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (8)
  • Hospital construction where drywall depth often varies (2)
  • Ideal for great rooms and home offices (1)
  • Ideal for residential and home office applications (1)
  • Ideal for residential and home office applications (1)
  • Ideal for the modern office with workstations that have power, communications and data equipment (2)
  • Ideal for use in residential market in wood floor applications (1)
  • Indoor;Outdoor (3)
  • Industrial;Commercial;Used where liquid-tight flexible metallic raceway is installed in outdoor or indoor locations, and exposed to continuous or intermittent moisture;Used to positively bond flexible liquid-tight flexible metallic conduit to boxes or enclosures;Typical applications include raceway for general purpose industrial and commercial construction, Machine OEMs, panel builders, indoor and outdoor installations;Liquid-tight applications against water, oils, cutting fluids, mild acids;For use in ele (1)
  • Junction for Branch Conduits In Hazardous Locations (1)
  • Kindrof(R) Modular Metal Framing System (2)
  • Listed for Fan Support Up to 35 Lbs and Fixture Support Up to 50 Lbs (1)
  • Listed for fixture support up to 35 lbs (1)
  • Listed for masonry walls (5)
  • Listed for wall fixture support up to 10 lbs (1)
  • Machine Tools, Motor Hookups, Food Processing Equipment, Extensions from Wire Ways, and Sensor and Micro Switch Wiring Found In Control Consoles (4)
  • Metal Framing (20)
  • Non-metallic box feature a rugged polycarbonate construction to withstand extreme temperatures (1)
  • Non-metallic boxes feature a rugged polycarbonate construction to withstand extreme temperatures. (1)
  • Non-Metallic Sheathed Cable (9)
  • Non-Metallic Wiring Systems Only (1)
  • Octagon Boxes (3)
  • Old Work (1)
  • Old Work Application (1)
  • Prevents severe conduit bends and pullout (5)
  • Protection of Fiber Optic Cable, Installation of Instrumentation and Control Cable, Indoor and Outdoor Lighting, Packaging Equipment, Marine and Shipboard Wiring, and Flexing-Component Wiring Protection on Robots, Graphic Arts Equipments, Etc (4)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide flush service for power or communications and data (1)
  • Provide flush service for power, communications and data in wood floors (1)
  • Provides a Positive Seal Against Water, Oil And Dust (5)
  • Provides flush service for power, communications and data (1)
  • Provides high capacity for power wiring and communications cabling when feeding modular furniture (1)
  • Red Dot (1)
  • Residential-Holiday and Landscape Lighting;Wells and Sump Pumps;Sprinkler Systems;Plug-In Timers;Garages and Patios (1)
  • Suitable for any on grade/below grade application, concrete or wood sub-floor construction approved (2)
  • Suitable for any wiring application (5)
  • Suitable for Fixture Support Up to 50 Lbs (9)
  • Suitable for fixture support up to 50 lbs. (1)
  • Suitable for Fixture Support Up to 70 Lbs (1)
  • Suitable for Masonry Walls (5)
  • Superstruct(R) Metal Framing System (1)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (44)
  • Support and Framing (25)
  • Support and framing applications (19)
  • Surface Raceway and Lighting Systems (2)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (15)
  • The cover will fit the next smaller size box (3)
  • To Change Direction for Threaded, Rigid Conduit or When Terminating at a Box or Fitting (5)
  • To Connect Flexible Cord to a Box or Enclosure and Provide Adequate Strain Relief (3)
  • To positively bond conduit to box or enclosure (39)
  • To provide a liquidtight, dust tight connection between flexible, non-metallic conduit and a box or an enclosure (2)
  • To provide a liquidtight; dust tight connection between flexible, non-metallic conduit and a box or an enclosure. (1)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (5)
  • To secure pipes, tubes and hoses for fluid conductors (5)
  • Used to connect modular framing channels to accessories (3)
  • Used to mount, brace, support or connect structural loads in building construction such as pipe or electrical or data wire (5)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (52)
  • Wet Location (1)
  • Show More...

• Package Quantity

  

  • 1 ct (8)
  • 1 CT;10 PK (2)
  • 1 CT;25 PK (1)
  • 1 CT;5 PK (7)
  • 1 CT;50 Pk (2)
  • 10 CT (17)
  • 10 CT;100 PK (8)
  • 10 CT;50 PK (11)
  • 10 PK;100 CT (1)
  • 10 PK;250 CT (3)
  • 10 PK;500 CT (14)
  • 10 PK;600 CT (2)
  • 100 CT (29)
  • 100 CT;500 PK (4)
  • 18 CT (2)
  • 2 CT;10 PK (6)
  • 2 CT;20 PK (1)
  • 20 CT (12)
  • 20 CT;100 PK (1)
  • 20 PK;500 CT (2)
  • 24 CT (3)
  • 25 CA (1)
  • 25 CT (67)
  • 25 CT;100 PK (10)
  • 25 CT;50 PK (11)
  • 250 CT (1)
  • 250 PK;25 CT (1)
  • 3 CT (1)
  • 3 PK;1 CT (1)
  • 30 CT (3)
  • 4 PK;1 CT (3)
  • 48 CT (1)
  • 5 CT (8)
  • 5 CT;100 PK (1)
  • 5 CT;25 PK (10)
  • 5 PK;1 CT (1)
  • 50 CA (1)
  • 50 CT (76)
  • 50 CT;250 PK (1)
  • 50 PK (1)
  • 500 CT (5)
  • 500 PK;25 CT (1)
  • 6 CT (3)
  • 75 CT (3)
  • 8 CT (1)
  • 8 PK;1 CT (2)
  • Show More...

• Weight

  

  • 0.04 lb/EA (1)
  • 0.0419 lb (1)
  • 0.06 lb/EA (1)
  • 0.061 lb (1)
  • 0.07 lb/EA (1)
  • 0.08 lb/EA (2)
  • 0.09 lb (1)
  • 0.09 lb/EA (1)
  • 0.1 lb/EA (2)
  • 0.105 lb/EA (1)
  • 0.11 lb (1)
  • 0.11 lb/EA (1)
  • 0.125 lb/EA (2)
  • 0.13 lb/EA (1)
  • 0.14 lb (1)
  • 0.14 lb/EA (1)
  • 0.165 lb/EA (1)
  • 0.17 lb/EA (1)
  • 0.18 lb (1)
  • 0.19 lb/EA (1)
  • 0.22 lb/EA (4)
  • 0.23 lb/EA (2)
  • 0.25 lb/EA (7)
  • 0.26 lb/EA (1)
  • 0.27 lb/EA (1)
  • 0.28 lb/EA (1)
  • 0.29 lb/EA (3)
  • 0.32 lb/EA (1)
  • 0.34 lb/EA (2)
  • 0.35 lb/EA (2)
  • 0.36 lb/EA (2)
  • 0.37 lb/EA (1)
  • 0.375 lb/EA (1)
  • 0.38 lb/EA (7)
  • 0.4 lb/EA (1)
  • 0.41 lb/EA (1)
  • 0.44 lb/EA (3)
  • 0.45 lb/EA (1)
  • 0.47 lb/EA (1)
  • 0.4763 lb/EA (1)
  • 0.48 lb/EA (1)
  • 0.5 lb/EA (3)
  • 0.50 lb/EA (8)
  • 0.51 lb/EA (1)
  • 0.52 lb/EA (2)
  • 0.53 lb/EA (1)
  • 0.54 lb/EA (3)
  • 0.55 lb/EA (1)
  • 0.56 lb/EA (1)
  • 0.57 lb/EA (2)
  • 0.59 lb/EA (1)
  • 0.60 lb/EA (2)
  • 0.61 lb/EA (1)
  • 0.62 lb/EA (1)
  • 0.62.5 lb/EA (1)
  • 0.63 lb/EA (3)
  • 0.65 lb/EA (2)
  • 0.7150 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.75 lb/EA (1)
  • 0.76 lb (1)
  • 0.76 lb/EA (1)
  • 0.78 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.89 lb/EA (1)
  • 0.99 lb/EA (1)
  • 1 lb/EA (1)
  • 1.13 lb/EA (2)
  • 1.1599 lb/EA (1)
  • 1.18 lb/EA (1)
  • 1.19 lb/EA (1)
  • 1.31 lb/EA (1)
  • 1.35 lb/EA (1)
  • 1.55 lb/EA (1)
  • 1.69 lb/100 (1)
  • 1.75 lb/EA (1)
  • 1.88 lb/EA (1)
  • 1.9 lb (1)
  • 10 lb/100 (1)
  • 11.63 lb/100 (1)
  • 1100 lb/100 (1)
  • 112 lb/100 (1)
  • 112.5 lb/100 (2)
  • 115 lb/100 (1)
  • 12 lb/100 (1)
  • 12.38 lb/100 (1)
  • 12.5 lb/100 (7)
  • 124 lb/ft (1)
  • 125 lb/100 (1)
  • 129 lb/100 (1)
  • 13.38 lb/100 (1)
  • 13.5 lb/100 (1)
  • 13.6 kg/100 (1)
  • 13.81 lb/100 (1)
  • 136 lb/ft (1)
  • 137.5 lb/100 (2)
  • 14 lb/100 (2)
  • 14.5 lb/100 (1)
  • 15 lb/100 (2)
  • 15.38 lb/100 (1)
  • 15.5 lb/100 (1)
  • 152 lb/100 (2)
  • 155 lb/100 (2)
  • 16 lb/100 (2)
  • 16.63 lb/100 (1)
  • 16.75 lb/100 (1)
  • 160.5 lb/100 (1)
  • 17 lb/100 (1)
  • 17.5 lb/100 (1)
  • 179.5 lb/100 (1)
  • 18 lb/100 (2)
  • 185 lb/100 (5)
  • 19 lb/100 (2)
  • 19.63 lb/100 (1)
  • 190 lb/100 (4)
  • 2.13 lb/EA (1)
  • 2.56 lb/EA (1)
  • 20 lb/100 (1)
  • 20.5 lb/100 (2)
  • 21 lb/100 (3)
  • 21.5 lb/100 (1)
  • 212.5 lb/100 (1)
  • 219.5 lb/100 (1)
  • 22 lb/100 (1)
  • 22.5 lb/100 (2)
  • 23 lb/100 (1)
  • 23.19 lb/100 (1)
  • 23.5 lb/100 (1)
  • 25 lb/100 (8)
  • 25.5 lb/100 (1)
  • 26 lb/100 (1)
  • 27 lb/100 (1)
  • 27.5 lb/100 (3)
  • 271.5 lb/100 (1)
  • 277.5 lb/100 (1)
  • 28.5 lb/100 (2)
  • 29 lb/100 (2)
  • 3.25 lb/100 (1)
  • 3.25 lb/EA (1)
  • 3.5 lb/100 (1)
  • 3.53 lb (1)
  • 30.19 lb/100 (2)
  • 30.5 lb/100 (1)
  • 30.75 lb/100 (1)
  • 31.5 lb/100 (1)
  • 32 lb/100 (1)
  • 32.5 lb/100 (1)
  • 32.81 lb/100 (1)
  • 32.88 lb/100 (1)
  • 33.13 lb/100 (1)
  • 334.5 lb/100 (1)
  • 34.5 lb/100 (1)
  • 35.5 lb/100 (1)
  • 355 lb/100 (1)
  • 357 lb/100 (1)
  • 36 lb/100 (2)
  • 36.38 lb/100 (1)
  • 36.5 lb/100 (1)
  • 360 lb/100 (2)
  • 361.5 lb/100 (1)
  • 37.5 lb/100 (15)
  • 39.5 lb/100 (2)
  • 39.63 lb/100 (1)
  • 392 lb/100 (1)
  • 4.5 lb/100 (2)
  • 4.69 lb/100 (1)
  • 40.38 lb/100 (1)
  • 40.5 lb/100 (1)
  • 402 lb/100 (1)
  • 41 lb/100 (1)
  • 43 lb/100 (1)
  • 437.5 lb/100 (1)
  • 44 lb/100 (2)
  • 450 lb/100 (1)
  • 5 lb/100 (1)
  • 50 lb/100 (6)
  • 52.38 lb/100 (1)
  • 52.5 lb/100 (1)
  • 525 lb/100 (1)
  • 53 lb/100 (1)
  • 53.5 lb/100 (2)
  • 54 lb/100 (1)
  • 54.5 lb/100 (1)
  • 55 lb/100 (2)
  • 56 lb/100 (1)
  • 6 lb/100 (1)
  • 6.25 lb/100 (1)
  • 6.81 lb/100 (1)
  • 60 lb/100 (1)
  • 62.5 lb/100 (5)
  • 63.5 lb/100 (1)
  • 64.5 lb/100 (1)
  • 64.63 lb/100 (1)
  • 65 lb/100 (1)
  • 65.5 lb/100 (1)
  • 67.5 lb/100 (1)
  • 68 lb/100 (1)
  • 68.38 lb/100 (1)
  • 68.5 lb/100 (1)
  • 7.13 lb/100 (1)
  • 7.5 lb/100 (1)
  • 7.63 lb/100 (1)
  • 7.81 lb/100 (1)
  • 700 lb/100 (1)
  • 71 lb/100 (1)
  • 71.5 lb/100 (1)
  • 72 lb/100 (1)
  • 73 lb/100 (1)
  • 73.19 lb/100 (1)
  • 74 lb/100 (1)
  • 74.5 lb/100 (2)
  • 75 lb/100 (1)
  • 76.81 lb/100 (1)
  • 762.5 lb/100 (1)
  • 785.5 lb/100 (1)
  • 8 lb/100 (1)
  • 8.5 lb/100 (1)
  • 8.56 lb/100 (1)
  • 8.63 lb/100 (1)
  • 8.69 lb/100 (1)
  • 8.81 lb/100 (1)
  • 80.19 lb/100 (1)
  • 83.5 lb/100 (1)
  • 84.1 lb/ft (1)
  • 84.38 lb/ft (1)
  • 840 lb/100 (1)
  • 87 lb/ft (3)
  • 87.5 lb/100 (2)
  • 9 lb/100 (2)
  • 9.06 lb/100 (1)
  • 90 lb/100 (1)
  • 93 lb/100 (1)
  • 96.5 lb/100 (1)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (56)
  • ALL PLASTIBOND FITTINGS (4)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (8)
  • CONDUIT HANGERS/STAND OFF STRAPS (5)
  • CORD CONNECTORS & CORD GRIPS (56)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (3)
  • FLEX & MC FITTINGS (51)
  • FLOOR BOXES (42)
  • FORM 5 CONDULETS, COVERS, & GASKETS (13)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (4)
  • Form 9 condulets, covers & gaskets (1)
  • Fuses & Fuse Accessories (2)
  • HANDY BOXES (15)
  • HAZARDOUS LOCATION FITTINGS (2)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (1)
  • LAMPS (2)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (1)
  • METALLIC FITTINGS (93)
  • MISC FITTINGS (54)
  • NON-METALLIC FITTINGS (34)
  • NON-METALLIC SEALTITE AND FITTINGS (5)
  • OCTAGON BOXES (2)
  • Plastibond, Fiberglass Conduit & Fittings (1)
  • PLASTIC BOXES (78)
  • PVC & ENT (1)
  • PVC CONDULETS (1)
  • Residential plates (1)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (5)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • SPRING NUTS & TWIRL NUTS (12)
  • STEEL BOXES & COVERS (103)
  • STEEL EMT FITTINGS (10)
  • STRUT CHANNEL (51)
  • STRUT STRAPS (64)
  • SWITCH BOXES (11)
  • THREAD RODS (4)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (1)
  • WEATHERPROOF BOXES & COVERS (9)
  • WIRE NUTS (1)
  • Show More...

• Construction

  

  • Drawn (35)
  • Welded (6)
  • Show More...

• Minimum Qty

  

  • 10 (38)
  • 100 (4)
  • 20 (15)
  • 50 (2)
  • Show More...

• Knockouts

  

  • 0 (81)
  • 1 (5)
  • 10 (7)
  • 11 (6)
  • 12 (8)
  • 13 (6)
  • 16 (5)
  • 17 (4)
  • 20 (2)
  • 22 (2)
  • 24 (2)
  • 26 (2)
  • 3 (1)
  • 4 (5)
  • 5 (1)
  • 6 (2)
  • 7 (3)
  • 8 (6)
  • FALSE (47)
  • true (32)
  • Yes (1)
  • Show More...

• Type

  

  • 90 degree Angle Fittings (10)
  • Adjustable Covers (2)
  • Angular Fittings (2)
  • Bar Hangers (3)
  • Beam Clamps (3)
  • Beam Clamps & Hanger Rod Supports (1)
  • Beam Clamps (Series 500) (5)
  • Box Partitions (1)
  • Brackets (2)
  • Bullet-45 Degree (4)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • Cable Caps (2)
  • Ceiling Boxes (14)
  • Ceiling Pan Boxes (1)
  • Channels and Concrete Inserts (2)
  • Clamp, Beam (1)
  • Clamp, RC Beam (2)
  • Clips (2)
  • Conduit Body - Series A - Rigid/IMC (1)
  • Conduit Body Covers & Gaskets-Series A & B (1)
  • Conduit Elbow - Standard Radius (5)
  • Conduit, Cable & Pipe Supports (8)
  • Cone Nut (3)
  • Connectors-45 Degree (15)
  • Connectors-90 Degree (28)
  • Connectors-Straight (32)
  • Cord Connectors-Straight (1)
  • Device Boxes, Covers & Accessories (5)
  • Drop-In Floor Boxes (1)
  • eFab (3)
  • ENT Flexible Raceway (5)
  • Extension Rings (12)
  • Fittings & Hardware (7)
  • Fittings, Brackets & Hardware (19)
  • Flat Plate Fittings (1)
  • Flush Service (28)
  • Form 8 UL-4X Conduit Body (2)
  • Gang Boxes (5)
  • Grounding Connector-90&deg, (1)
  • Grounding Connectors-45 degree (11)
  • Grounding Connectors-90 degree (11)
  • Grounding Connectors-Straight (15)
  • Hangers (2)
  • Hazardous Location Conduit Fitting (1)
  • Hit Lock Connectors (1)
  • Liquidtight Fittings (12)
  • Liquidtight Flexible Metal Conduit Fittings (1)
  • Liquidtight Flexible Non-Metallic Conduit (4)
  • Liquidtight Sealing Gasket (6)
  • Masonry Boxes (8)
  • Metal Channels (49)
  • Multi-Gang Rectangular Floor Boxes & Covers (7)
  • Octogonal Boxes (18)
  • One-Gang Nail-On New Work Box (1)
  • Outlet Box Covers (90)
  • Outlet Boxes (53)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (57)
  • Pipe Straps, Pipe Clamps and Hangers (2)
  • Poke Through Systems (1)
  • Post Bases (2)
  • Recessed Service (2)
  • Residential, Wood Sub-Floors-Adjust-A-Box (2)
  • Rigid and Intermediate Metal Conduit Fittings (1)
  • Rigid Non-Metallic Conduit Fittings & Accessories (1)
  • Round Boxes (3)
  • Round Floor Boxes, Covers & Accessories (12)
  • Round Old Work Box (1)
  • Sealing Fitting - Vertical/Horizontal (1)
  • Set Screw Couplings & Connectors (1)
  • Square Boxes (1)
  • Squeeze Connectors (7)
  • Supports (1)
  • Surface Raceway & Lighting Systems (Series 800) (2)
  • Switch Boxes (21)
  • Teck Cable Fittings (2)
  • Threaded Products & Hardware (Series 100) (14)
  • Two-Gang Nail-On New Work Outlet Box (1)
  • Type B Liquidtight Tubing & Fittings (4)
  • Utility Boxes (7)
  • Weatherproof "T" Boxes & Covers (3)
  • While-In-Use-Weatherproof Covers (1)
  • Wiremesh Grips (5)
  • Show More...

• Trade Size

  

  • 1 in (10)
  • 1 in , 27 mm (1)
  • 1/2 in (16)
  • 1-1/2 in (8)
  • 1-1/2 in , 41 mm (1)
  • 1-1/2 in;35 mm (1)
  • 1-1/4 in (4)
  • 1-1/4 in , 35 mm (1)
  • 2 in (9)
  • 2 in , 53 mm (1)
  • 2-1/2 IN (3)
  • 3 in (4)
  • 3/4 in (16)
  • 3/8 in (3)
  • 4 in (3)
  • 4 in , 103 mm (1)
  • Show More...

• Depth

  

  • 0.955 in (1)
  • 1-1/2 (12)
  • 1-11/32 in (1)
  • 13.53 (1)
  • 13/16 (8)
  • 13/16 In (8)
  • 15.89 (1)
  • 1-5/8 (23)
  • 1-5/8 In (8)
  • 18.46 (1)
  • 21.92 (1)
  • 2-1/8 (13)
  • 2-3/8 in (1)
  • 3/4 (1)
  • 3-1/8 (1)
  • 36.63 (1)
  • Show More...

• Thread Size

  

  • 1 in (2)
  • 1 in NPT (7)
  • 1/2 - 13 (4)
  • 1/2 in (8)
  • 1/2 in NPT (9)
  • 1/4 - 20 (3)
  • 1-1/2 in NPT (7)
  • 1-1/4 in NPT (4)
  • 2 in NPT (8)
  • 2-1/2 in NPT (3)
  • 3 in NPT (4)
  • 3/4 in (7)
  • 3/4 in NPT (9)
  • 3/8 - 16 (3)
  • 3/8 in NPT (3)
  • 3/8-16 (2)
  • 4 in NPT (3)
  • 5/16 -18 (1)
  • Show More...