Used As In-Line Protection For Fluorescent Fixtures, The Littelfuse LGR and LMF Series Fuses and LHR Holder Offer Increased Safety and Reliability to Lighting Systems. On A 277 Volt System, A Fault Occurring In An Un-Fused Fixture Could Take Out The Entire Branch Circuit Affecting Up to 100 Fixtures. This Could Cause Safety Problems As Well As Shut Down Operations. By Individually Fusing Fixtures, These Problems Will Be Avoided. The Added Benefits Of This Is The Ability to Quickly Identify The Problem Fixt

Littelfuse® Fuse Reducers Allow Smaller Size Fuses to Be Installed Into Existing Fuse Clips to Prevent Overfusing.

Fuse Block 250VAC 250VDC Class R 30A Adder Box With Reinforced Clip

Fuse Block 250VAC 250VDC Class R 30A 3-Pole Box With Reinforced Clip

Fuse Block 250VAC 250VDC Class R 60A 1-Pole Box With Reinforced Clip

Mersen Fuse Reducers Allow The Use Of Lower Rated Fuses In Existing Equipment Having Clips With Higher Ampere Ratings. The Use Of Closer Rated Time-Delay Fuses Can Improve Circuit Protection. For Example, Renewable or One-Time Fuses Feeding A Motor Can Be Replaced With Fuses Sized Closer to The Motor Nameplate Current. Non-Rejection Reducers Will Allow Class H, K or R Fuses to Fit Class H or K Clips. Rejection-Type Reducers Will Allow Only Class R Fuses to Fit Class R Clips or Only Class J Fuses to Fit C

Fuse Block 300VAC 300VDC Class T 60A 3-Pole Box With Reinforced Clip

Fuse Block 600VAC 600VDC Class R 30A 1-Pole Box With Reinforced Clip

Fuse Block 600VAC 600VDC Class R 30A 3-Pole Box With Reinforced Clip

Fuse Block 600VAC 600VDC Class R 30A 3-Pole Screw With Reinforced Clip

Fuse Block 600VAC 600VDC Class J 60A 3-Pole Box With Reinforced Clip

Mersen Fuse Reducers Allow The Use Of Lower Rated Fuses In Existing Equipment Having Clips With Higher Ampere Ratings. The Use Of Closer Rated Time-Delay Fuses Can Improve Circuit Protection. For Example, Renewable or One-Time Fuses Feeding A Motor Can Be Replaced With Fuses Sized Closer to The Motor Nameplate Current. Non-Rejection Reducers Will Allow Class H, K or R Fuses to Fit Class H or K Clips. Rejection-Type Reducers Will Allow Only Class R Fuses to Fit Class R Clips or Only Class J Fuses to Fit C

Open-Style PDB Ul 1953 1000V 250A Tin-Plated Aluminum - 310A 3-Pole 1 - 4 Openings; 350-#6 --- #2-#14 Box to Box

Barrier Strip, 12 Circuits, 12 Poles, 35 A, 300/600 V, Plastic, +221 °F, 5.540 In Overall Length, 0.937 In Overall Width, 0.748 In Overall Height, 0.19 LB

Terminal Strip, 12 Circuits, 12 Poles, 30 A, 600 V Ac, Steel (Screw) Material, -40 to +260 °F, 7.75 In Overall Length, 1.33 In Overall Width, 0.81 In Overall Height, 0.37 LB

Din Rail, Aluminum, 39.4 In Overall Length, 0.38 LB

Square Box Cover, 15 A, 125 V Ac, 0.58 LB

Fuse Holder, Photovoltaic Application, Screw Connection Type, 30 A Current Rating, FNQ-R Fuse;KTK-R Fuse;LP-CC Fuse For Use With, 10 X 38 MM Fuse Size, Midget Fuse Type, Din Rail Mount Mounting Type, 1 - Poles, -20 to 120°C;-4 to +248°F Operating Temperature Range, 2.909 In;73.88 MM Overall Height, 2.756 In;70 MM Overall Length, 2.434 In;61.83 MM Overall Width, 1 CT;12 CT Package Quantity, Agency Ratings Up to 1000 VDC For Use With PV Fuses.;Available Remote PLC Indication Module;Enhanced Safety With Ip20

In-Line Fuse Holder, 15 A, 32 V, 2.19 In Overall Length, 0.69 In Overall Height, 0.05 LB

Fuse Block, Screw Connection Type, 30 A Current Rating, Supplementary 13/32" X 1-1/2" (10X38MM) Fuses For Use With, 1-1/2 X 13/32 In;10 X 38 MM Fuse Size, Midget Fuse Type, Cover Includes, Thermoplastic (Base);Thermoplastic (Cover);Tin Plated Bimetallic Copper (Clip);Tin Plated Bimetallic Copper (Terminal);Zinc Plated Steel (Screws and Pressure Plate) Material, Din Rail Mount;Panel Mount, 2 - Poles, -40 to +120 °C Operating Temperature Range, 3.7 In;95 MM Overall Height, 0.8 In;20 MM Overall Length, 1.3 In