Narrow By:

• Product Type:Locking Device Turnlock Connector

• Product Type

  

  • 1 In Alum L-T CRD&CBL Conn (2)
  • 1 In Insul. Liq.Tight Conn Straigh (1)
  • 1 Inch 90 Deg Bullet Connector (1)
  • 1 Inch Conn, Sscrew, Emt, STL, Insul (1)
  • 1/2 In Cord Conn .450-.560 Rang (1)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1/2 Inch 90 Deg Bullet Connector (1)
  • 1/2 Inch Conn, 90 Deg. Ac/Flex, SQZ (1)
  • 1/2 Inch Straight Bullet Connector (1)
  • 1-1/2 In Alum L-T CRD&CBL Conn (2)
  • 1-1/2 In STR Strain RLF Conn (2)
  • 1-1/2 Thdless Connector (1)
  • 2 Inch Straight Bullet Connector (1)
  • 2.5 In Insul 90 Deg Liq Tight Conn (1)
  • 3 In Insul 90 Degree Liq Tight Con (1)
  • 3/4 Black Beauty Cord Fit .400-.560 (1)
  • 3/4 Black Beauty Cord Fit .560-.690 (1)
  • 3/4 Inch Conn, SQZ, Ac/Flex, (1)
  • 3/4 Inch Straight Bullet Connector (1)
  • 3/4IN Cord Connector .375-.500 Rang (1)
  • 3/4INCH 90 Deg Bullet Connector (1)
  • 3-1/2 Thdless Conn. (1)
  • 3M™ Highland™ Wire Connectors (3)
  • 3M™ Performance Plus™ Wire Connectors (8)
  • 3M™ Scotchlok™ Idc Connector 560 & 560B (2)
  • 3M™ Scotchlok™ Idc Connector 562 (2)
  • 3M™ Scotchlok™ Idc Connector 567 (2)
  • 3M™ Secure Grip Wire Connectors (6)
  • 3M™ Splice Kit Uf (3)
  • 4 Threadless Conn. (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • Aluminum to Copper Lug (1)
  • Angle Connector (1)
  • Blade Connector (1)
  • Box Connector (1)
  • Butt Connector (1)
  • Cable Connector (7)
  • Cable Grip Connector and Mesh (2)
  • CF4/10 Female Connector (1)
  • CF4/10 Male Connector (1)
  • Combination Connector (1)
  • Commercial Fittings (4)
  • Compression Connector (31)
  • Conduit Connector (1)
  • Conn 15A 125V 2P3W H/L BW (1)
  • Conn 15A 125V 2P3W STR Vinyl/Armored Yl (1)
  • Conn 15A 250V 2P3W H/L BW (1)
  • Conn 15A 250V 2P3W STR Autogrip BW (1)
  • Conn 15A 250V 2P3W STR Vinyl Yl (1)
  • Conn 20A 250V 2P3W STR BW (1)
  • Conn 20A 277/480V 3PH 4P4W H/L BW (1)
  • Conn 20A 480V 2P3W H/L BW (1)
  • Conn 30A 125/250V 3P3W H/L BW (1)
  • Conn 30A 125/250V 3P4W H/L BW (1)
  • Conn 30A 250V 3PH 3P3W H/L BW (1)
  • Conn 30A 480V 2P3W H/L BW (1)
  • Conn 50A 250V 2P3W H/L Nylon BK (1)
  • Conn 50A 250V 3PH 3P4W H/L Nylon BK (1)
  • Conn 50A 480V 3PH 3P4W H/L Armored (1)
  • Conn 50A 600VAC/250VDC 3P4W H/L Nylon BK (1)
  • Conn WT 15A 125V 2P3W H/L Yl (1)
  • Conn WT 30A 250V 2P3W H/L Yl (1)
  • Conn WT 30A 250V 3PH 3P4W H/L Yl (1)
  • Connector (60)
  • Connector Cable (1)
  • Copper Connector (2)
  • Cord Connector (19)
  • Cord Grip Connector (18)
  • Cord Grip Connector and Mesh (2)
  • Cordcon, STR ML, .75-.88", 3/4", Nyl, Gy (2)
  • CR 50A 250VDC/600VAC T/L Conn (2)
  • CR 50A 250VDC/600VAC T/L Plug (2)
  • Disc No Sub (6)
  • Duplex Connector (2)
  • Emt Compression Connector (38)
  • Emt Set Screw Connector (9)
  • Female Connector (3)
  • Female Twist On Connector (2)
  • Flexible Conduit (1)
  • Flexible Connector (6)
  • Ground Connector (5)
  • Grounding Bridge (1)
  • Halo Undercabinet Linear Conn. White (1)
  • H-Type Compression Connector (2)
  • Hub Connector (10)
  • Individual 24" Daisy Chain Connector - W (2)
  • Individual 3" Daisy Chain Connector - W (2)
  • Insulated Connector (7)
  • Insulation Displacement Connector (4)
  • Jack Wall Phone Box Mount 4 Cond Iv (1)
  • Keystone Connector (5)
  • Keystone Insert (2)
  • Liquid Tight Connector (3)
  • Liquid Tight Flexible Connector (5)
  • Liquid Tight Straight Connector (46)
  • Liquidtight Conduit Connector (1)
  • Locking Device Connector (16)
  • Locking Device Plug (14)
  • Locking Device Turnlock Plug (18)
  • Locking Plug (4)
  • MC Cable Connector (1)
  • Mechanical (3)
  • Mechanical Connector (15)
  • Mechanical Connector Lug (12)
  • Multi-Tap Connector (1)
  • Non Metallic Liquid Tight 90° Connector (3)
  • Non Metallic Liquid Tight Straight Connector (3)
  • Non-Metal Watertight Connector (1)
  • Non-Metallic 90° Connector (4)
  • Non-Metallic 90°Connector (4)
  • Non-Metallic Cable Connector (5)
  • Non-Metallic Liquid Tight 90°Connector (3)
  • Non-Metallic Liquid Tight Connector With O-Ring (3)
  • Non-Metallic Liquid Tight Straight Connector (3)
  • Non-Metallic Straight Connector (6)
  • Phone Jack SGL Flush MNT 4COND STD Ul Iv (1)
  • Phone Jack SGL Flush MNT 4COND STD Ul La (1)
  • Photoelectric Sensor (4)
  • Pin and Sleeve Connector (1)
  • Pin and Sleeve Plug (1)
  • Plug 20A 277/480V 3PH 4P4W H/L BW (1)
  • Plug 20A 480V 2P3W H/L BW (1)
  • Plug 20A 480V 3PH 3P3W H/L BW (1)
  • Plug 30A 250V 3PH 3P3W H/L BW (1)
  • Plug 30A 277/480V 3PH 4P4W H/L BW (1)
  • Plug 30A 277V 2P3W H/L BW (1)
  • Plug 30A 480V 2P3W H/L BW (1)
  • Plug Angle 30A 250V 3PH 3P4W STR Gy (1)
  • Plug Angle 50A 250V 3PH 3P4W STR Gy (1)
  • Plug Angle 60A 250V 3PH 3P4W STR Gy (1)
  • Plug Angle Univ 30/50A 125/250V 3P3W BK (1)
  • Plug Angle Univ 30/50A250V 2P3W Vinyl BK (1)
  • Plug WT 15A 125V 2P3W H/L Yl (1)
  • Plug WT 20A 125V 2P3W LKG Yl (1)
  • Plug WT 30A 125/250V 3P4W LKG Yl (1)
  • Plug WT 30A 125V 2P3W H/L Yl (1)
  • Plug WT 30A 250V 2P3W H/L Yl (1)
  • Plug WT 30A 250V 3PH 3P4W H/Lyl (1)
  • Power Terminal Block (2)
  • PRL3A 3P F-FRM Conn Kit, Horz SNGL MNT (2)
  • PRL4 Conn Kit SNGL MTD K-FRM BKR (2)
  • PRL4 Conn Kit Twin MTD 3P E/F-FRM BKR (2)
  • Pro Connector (3)
  • Push-In Connector (3)
  • Raintight Connector (2)
  • Receptacle (1)
  • Recp Duplex WT 20A 125V 2P3W STR Yl (1)
  • Rigid Conduit Compression Connector (3)
  • Romex Connector (5)
  • Saddle Grip Connector (2)
  • Service Post Connector (4)
  • Set Screw Connector (1)
  • Set Screw EMT Connector (6)
  • Sheathed Cable Connector (1)
  • single Receptacle (3)
  • Splice Connector (3)
  • Splicing Connector (2)
  • Split Bolt Connector (3)
  • Squeeze Connector (16)
  • STR BLD Conn 3W 15A 125V HG (2)
  • Straight Blade Connector (12)
  • Straight Blade Device Connector (2)
  • Straight Blade Plug (3)
  • Straight L.T. Conn. (1)
  • Strain Relief Connector (11)
  • Strain Relief Cord and Cable Connector (8)
  • Strain Relief Cord Connector (8)
  • Strap Connector (14)
  • Super-Safeway Plug (2)
  • Tap Connector (1)
  • Turnlock Single Receptacle (10)
  • Turnlok Conn 3W 15A 125V (2)
  • Turnlok Plug 3W 15A 125V (2)
  • Twisted Pair Connector (2)
  • Twist-On Wire Connector (6)
  • U-Connector (2)
  • Watertight Connector (1)
  • Watertight Plug (1)
  • Watertite Plug (2)
  • Wide Range Tap Connector (Al/Cu) ***** See Connectors Catalo (2)
  • Wing Shape Fitting (1)
  • Wing Twist Connector (2)
  • Wing Wire Connector (5)
  • Winged Wire Connector (9)
  • Wire Connector (15)
  • Wire Twist Connector (6)
  • Wireway Connector 10X10 (1)
  • Show More...

• Brand

  

  • 3M (15)
  • ABB (2)
  • American Fittings Corp (1)
  • American Lighting (2)
  • Amfico (21)
  • Appleton (66)
  • Appleton/Oz Gedney (2)
  • ARLINGTON (21)
  • Arlington Industries (46)
  • Arrow Hart (4)
  • Blackburn Grounding (6)
  • Blackburn Mechanical (18)
  • Bridgeport (156)
  • Bridgeport Fittings (83)
  • Buchanan (19)
  • BURNDY (12)
  • Cablofil (8)
  • CALBRITE (7)
  • COOPER WIRING DEVICES (70)
  • Diode Led (4)
  • Easy-Twist (11)
  • Eaton (69)
  • EATON CROUSE-HINDS SERIES (21)
  • EATON CUTLER-HAMMER (9)
  • Eaton Wiring Devices (14)
  • Erico, Inc. Eritec-Caddy (1)
  • FLUKE (1)
  • Galvan Industries (1)
  • GC-Waldom Electronics (2)
  • HALO (5)
  • Highland (5)
  • HUBBELL WIRING DEVICE/KELLEMS (2)
  • Hubbell Wiring Devices (28)
  • Hubbell--Killark (2)
  • Ideal (40)
  • JUNO (1)
  • KILLARK (23)
  • Kindorf (1)
  • Klein Tools (13)
  • KWIKON (1)
  • legrand (1)
  • Legrand On-Q (24)
  • LEGRAND-ON-Q (5)
  • LEGRAND-PASS & SEYMOUR (47)
  • Leviton (1)
  • LH DOTTIE (4)
  • Littelfuse (3)
  • MILBANK (3)
  • Minnesota Mining (3M) (6)
  • NSi (5)
  • Nsi Industries (45)
  • NTE ELECTRONICS (2)
  • nVent ERICO (2)
  • Nvent Hoffman (2)
  • ON-Q (3)
  • O-Z/GEDNEY (10)
  • PANDUIT (6)
  • Pass & Seymour (5)
  • Pass & Seymour/Legrand (4)
  • Pass and Seymour (89)
  • Performance Plus (2)
  • PLASTIBOND (28)
  • PLASTI-BOND (2)
  • Platinum Tools (11)
  • PLATINUM TOOLS INC (2)
  • Polaris (23)
  • Precision Multi Controls (1)
  • PVC & Accessories (1)
  • RACO (4)
  • Remke (2)
  • Remke Industries (3)
  • Scotchcast (1)
  • Scotchlok (17)
  • SNAP 2 IT (5)
  • SNAP2IT (1)
  • Southwire (2)
  • Steel City (25)
  • STEREN ELECTRONICS INTL (3)
  • Superstrut (1)
  • T&B Ind Fitting (117)
  • TERMINATOR (4)
  • Viton(R) (1)
  • WAGO CORPORATION (3)
  • Waldom Electronics CO. (1)
  • Weidmuller, Inc. (2)
  • Westgate MFG, Inc. (5)
  • WIREMOLD (7)
  • WIRING DEVICE-KELLEMS (100)
  • Woodhead (13)
  • Show More...

• Current Rating

  

  • 15 (9)
  • 15 A (20)
  • 15 AMPERE (1)
  • 20 (7)
  • 20 A (40)
  • 200 AMPERE (1)
  • 30 (5)
  • 30 A (35)
  • 50 (5)
  • 50 A (11)
  • Show More...

• Voltage Rating

  

  • 120 V (2)
  • 120/208 (9)
  • 125 (38)
  • 125 V (7)
  • 125 V ac (7)
  • 125 VAC (1)
  • 125/250 (18)
  • 125/250 V (2)
  • 125/250 V ac (16)
  • 125V (5)
  • 20 to 264 V ac;15 to 30 V dc (3)
  • 250 (22)
  • 250 V (6)
  • 250 V ac (22)
  • 250V (2)
  • 277 (11)
  • 277 VAC (2)
  • 277/480 (2)
  • 3 Phase 250 (6)
  • 3 Phase 480 (5)
  • 300 (4)
  • 300 V (3)
  • 3Ø 480V (3)
  • 3P 480 VAC (2)
  • 400 V (1)
  • 480 (21)
  • 480 V (5)
  • 480 V ac (4)
  • 480 VAC (1)
  • 600 (41)
  • 600 V (49)
  • 600 V ac (2)
  • 600 V Maximum Building Wire, 1000 V Maximum Signs And Lighting Fixtures (3)
  • 600 VAC AT 50 TO 400 HZ/250 VDC (1)
  • 600 VAC/VDC (6)
  • 600V (4)
  • N/A (5)
  • Show More...

• Number Of Poles

  

  • 2 (81)
  • 3 (34)
  • Show More...

• Number Of Wires

  

  • 2/3 (1)
  • 2-Wire (2)
  • 3 (97)
  • 3.0 (21)
  • 3-Wire (11)
  • 4 (53)
  • 4.0 (6)
  • 4-Wire (15)
  • 5 (5)
  • 5.0 (2)
  • 5-Wire (2)
  • Show More...

• Color

  

  • Aluminum (12)
  • Beige (3)
  • Black (49)
  • BLACK, WHITE (1)
  • Black/Red (2)
  • Black/White (32)
  • Black;White (20)
  • Blue (20)
  • Blue/Gray (2)
  • Brown (12)
  • Clear (4)
  • Clear/Transparent (2)
  • Copper (6)
  • Gray (72)
  • Gray (Exterior Coating);Red (Interior Coating) (3)
  • Gray 0 (2)
  • Gray/Red (2)
  • Gray;Grey (2)
  • Green (14)
  • Ivory (12)
  • Light Almond (6)
  • MALLEABLE IRON (10)
  • Metallic (38)
  • Orange (5)
  • Orchid (2)
  • Pink (5)
  • Polished Silver (6)
  • Purple (11)
  • Red (18)
  • RED/YELLOW (1)
  • Silver (46)
  • Tan (3)
  • White (30)
  • WHITE GLOSS (1)
  • Yellow (51)
  • Yellow (Handle) (6)
  • Yellow;Black (4)
  • Zinc (3)
  • Show More...

• Material

  

  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (10)
  • 2 MIL Red Urethane Ferrous Metal (Interior), 40 MIL Gray PVC Ferrous Metal (Exterior) (13)
  • ABS (1)
  • Aluminum (38)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Brass (10)
  • Bronze (2)
  • Bronze Alloy (2)
  • COMPOSITE (2)
  • Copper (10)
  • COPPER ALLOY (1)
  • Copperfree Aluminum (2)
  • Die Cast Zinc (14)
  • Die-Cast Zinc (48)
  • Die-Cast Zinc and Steel;Non-Metallic (Insulator) (3)
  • Elastomer/Composite (9)
  • Elastomeric/Composite (6)
  • Electrogalvanized Steel (Body/Nut);Natural/Neoprene (Bushing) (12)
  • ELECTROSTATICALLY APPLIED EPOXY/POLYESTER COATED COPPER FREE ALUMINUM (1)
  • FERROUS (5)
  • Flame-retardant Polypropelene (26)
  • G90 Galvanized Steel (2)
  • Glass-Filled Nylon (1)
  • Gray Nylon (6)
  • High Copper Alloy Body;Silicon Bronze (Nut;Lockwasher) (2)
  • Impact Modified Nylon (1)
  • Machined Aluminum (3)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (66)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (10)
  • Malleable Iron And Steel (2)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Mild Steel;Steel (2)
  • N/A (4)
  • NICKEL PLATED STEEL (1)
  • Nickel-plated Brass (Plug Blades and Connector Contacts);NEoTEX(R) Paracril OZO rubber (Outer Housing and Grommet);Stainless Steel (Face Screws);Nylon (Face Insert);Brass (Wire Saddle Clamp) (4)
  • Nylon (137)
  • Nylon (Body) Santoprene® (Grommet) Polyethylene (Sealing Ring) Zinc (Locknut) (6)
  • Nylon (Housing);Polyester (Blade Holder, Cord Grip);Brass (Blades);Stainless Steel (Shell);Stainless Steel (Terminal Screws ) (3)
  • Nylon (Housing/Cord Clamp);Clear Polycarbonate (Terminal Retainer);Brass (Blades, Terminal Screws);Cold Rolled Steel - Nickel Plated (Terminal Clamp);Steel - Nickel Plated (Assembly Screws) (10)
  • Nylon (Housing/Cord Clamp, Blade Holder);Clear Polycarbonate (Terminal Retainer);Brass (Contact, Terminal Screws);Nickel Plated Steel (Terminal Clamp, Assembly Screws) (3)
  • Nylon (Outer Shell);Glass-Filled Nylon (Terminal Retainer/Interior Body) (2)
  • Nylon (Outer Shell/Interior Body);Polycarbonate (Terminal Retainer) (9)
  • Plastic (21)
  • Polyamide/Nylon 6.6 (4)
  • Polycarbonate (5)
  • Polyurethane (4)
  • PVC (3)
  • Rubber (24)
  • Rubber (Super-Safeway Outer Housing);Stainless Steel (Face Screw);Nylon (Face Insert);Brass (Wire Saddle Clamp);Steel (Cord Clamp Screws) (2)
  • Santoprene thermoplastic elastomeric (2)
  • Santoprene[T] Thermoplastic Elastomeric Over Polypropylene (Outer Shell);Nylon (Interior Body) (5)
  • Screw Machined Zinc Plated Steel (3)
  • Silicone (4)
  • Solid Brass (2)
  • Stainless Steel (2)
  • Stainless Steel - 316 (5)
  • Steel (87)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Thermoplastic (52)
  • Thermoplastic Elastomer (Body);Holder White Nylon (Blade );Clear polycarbonate (Terminal Retainer);Nickel plated brass (Blades, Terminal Screws );White Nylon (Core );Black Elastomer (Bushing & Cone Seal);Nylon (Gotcha Ring );PBT (Strain Relief Nut) (2)
  • Tin-Plated Copper (2)
  • UL94V-0 Flame Retardant Plastic (2)
  • UV-Rated Plastic (24)
  • Vinyl (4)
  • Zinc (25)
  • Zinc (Body) Santoprene® (Grommet) Nylon (Gripper) Polyethylene (Sealing Ring) (3)
  • Zinc Cast (11)
  • Zinc Die Cast (41)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • Zinc Electroplated Steel (3)
  • Show More...

• Hub Size

  

  • 3/4 in (2)
  • 3/8 in (2)
  • Show More...

• Finish

  

  • #4 Polished Finish (6)
  • Aluminum (11)
  • ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER WASH AND PHOSPHATE UNDERCOAT (1)
  • Ball burnish (48)
  • Ball Burnished;Mirror Smooth (42)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Bare/Untreated (2)
  • Black (4)
  • Chromate, Epoxy Powder Coat/Zinc Electroplated (10)
  • COPPER (7)
  • Electro Zinc Plated/Chromate Coating (8)
  • ELECTROGALVANIZED (12)
  • Galvanized (2)
  • Gray (4)
  • Matte (12)
  • Molded (2)
  • Natural (2)
  • Nickel (2)
  • Nickel Plated (7)
  • Nickel Plated (Blade, Terminal Screw) (2)
  • Nickel Plated (Plug Blades and Connector Contacts) (4)
  • Nickel Plated (Plug Blades and Connector Contacts);Zinc-plated (Cord Clamp Screw) (2)
  • Nickel Plated (Terminal Clamp, Assembly Screw) (13)
  • Nickel-Plated (3)
  • NO FINISH (13)
  • NYLON (2)
  • Other;Zinc Plated (7)
  • Painted;Powder Coat (2)
  • PLAIN (NO FINISH) (1)
  • Plastic (1)
  • Plastisol Insulated (3)
  • POLISHED (1)
  • Polycarbonate (3)
  • PVC Exterior Coating;Urethane Interior Coating;Electro Zinc Plated/Chromate Coating (2)
  • Silver (9)
  • Thermoplastic (27)
  • Tin Plated (3)
  • Tinned (13)
  • Untreated (10)
  • white (2)
  • WHITE GLOSS (5)
  • Zinc Electro Plated (11)
  • Zinc Electroplate (2)
  • Zinc Electroplated (131)
  • Zinc Electroplated/Chromate Coating (22)
  • Zinc Plated (44)
  • Zinc Plating/Clear Chromate (7)
  • Show More...

• Terminal Type

  

  • 2-Conductor Terminal (2)
  • Compression (6)
  • Compression;Crimp (2)
  • Insulation Displacement Connector (3)
  • Push-In (3)
  • Screw (70)
  • Screw;Clamp (14)
  • Spring (2)
  • Twist-On (8)
  • Winged (9)
  • Show More...

• Diameter

  

  • 0.33 to 0.66 in (Cord) (3)
  • 0.94 in;23.9 mm (2)
  • 0.975 in (9)
  • 1 in (4)
  • 1.19 in (2)
  • 1.220 in (7)
  • 1.25 in (3)
  • 1.25 in;31.8 mm (4)
  • 1.46 in (2)
  • 1.5 in (2)
  • 1.516;0.230 to 0.690 in (Cord) (2)
  • 1.527 in;38.78 mm (4)
  • 1.58 in (2)
  • 1.605 in (2)
  • 1.75 in (2)
  • 1.75 in;44.5 mm (2)
  • 1.78 in (Width) (4)
  • 1.813 in (2)
  • 1.85 in;47.1 mm (2)
  • 1.97 in (Width) (6)
  • 1.97 in;50.04 mm (4)
  • 1-1/16 in (2)
  • 1-1/2 in (4)
  • 1-1/32 in (3)
  • 1-1/8 in (6)
  • 1-11/16 in (2)
  • 1-11/16 in;42.9 mm (2)
  • 1-13/32 in (2)
  • 1-15/16 in (3)
  • 1-17/32 in (4)
  • 1-3/4 in (3)
  • 1-3/8 in (8)
  • 1-5/16 in (3)
  • 15/16 in;23.8 mm (3)
  • 1-7/16 in (4)
  • 1-7/32 in (2)
  • 1-7/8 in;47.6 mm (2)
  • 2 in (5)
  • 2.20 in (3)
  • 2.20 in;0.225 to 1.150 in (Cord) (16)
  • 2.20 in;0.750 to 1.150 in (Cord) (4)
  • 2.21 in;56.13 mm (5)
  • 2.26 in (2)
  • 2.29 in (4)
  • 2.38 in (2)
  • 2.49 in;0.36 to 0.84 in (Cord) (2)
  • 2.49 in;0.43 to 1.15 in (Cord) (2)
  • 2.563 in;65.1 mm (3)
  • 2-11/16 in (2)
  • 2-3/8 in (3)
  • 2-5/32 in (3)
  • 2-5/8 in (4)
  • 3 in (2)
  • 3.25 in;0.38 to 1.00 in (Cord) (3)
  • 3.929 INCH (1)
  • 3-1/4 in (2)
  • 3-1/4 in;82.6 mm (2)
  • 3-11/16 in (2)
  • 3-3/16 in (2)
  • 3-3/8 in (2)
  • 3-7/16 in (2)
  • 4 in (2)
  • 4.65 INCH (1)
  • 4-1/32 in (2)
  • 4-13/16 in (2)
  • 5.75 INCH (1)
  • 5-1/8 in (2)
  • Show More...

• Nema Rating

  

  • 0.63 x 0.87 x 1.26 (2)
  • 1 Indoor, electrical protection (2)
  • 12;13;4;4X (46)
  • 3R (17)
  • 4 (3)
  • 5-15 (1)
  • 5-15P (4)
  • 5-15R (6)
  • 5-20R (4)
  • 6-15R (2)
  • 6-20P (2)
  • 6-20R (3)
  • FB-1 (12)
  • L10-20P (1)
  • L10-30R (1)
  • L14-20P (2)
  • l14-20R (2)
  • L14-30P (3)
  • L14-30R (4)
  • L15-20P (2)
  • L15-20P;L15-20R (2)
  • L15-20R (4)
  • L15-30P (2)
  • L15-30R (5)
  • L16-20P (3)
  • L16-20P;L16-20R (2)
  • L16-20R (5)
  • L16-30 (2)
  • L16-30P (4)
  • L16-30R (3)
  • L17-30P (2)
  • L17-30R (2)
  • L18-20R (1)
  • L21-20P (2)
  • L21-20R (2)
  • L21-30R (2)
  • L5-15P (5)
  • L5-15R (6)
  • L5-20R (3)
  • L5-30P (1)
  • L5-30R (2)
  • L6-15P (2)
  • L6-15R (3)
  • L6-20P;L6-20R (2)
  • L6-20R (2)
  • L6-30P (1)
  • L7-15 (1)
  • L7-15P (1)
  • L7-15R (5)
  • L7-20R (2)
  • L8-20R (3)
  • L8-30R (2)
  • NEMA 4X, NEMA 6P (10)
  • NEMA 5-15R (3)
  • NEMA L16-30R (2)
  • NEMA Wd1;NEMA Wd5 (3)
  • Non-NEMA (22)
  • Type 1 (2)
  • Show More...

• Mounting Type

  

  • Box (2)
  • Cord Mounted (19)
  • Plug Mount (13)
  • Push-In (2)
  • Push-On (6)
  • Receptacle (10)
  • Screw Mount (17)
  • Show More...

• Length

  

  • 0.81 in;20.6 mm (4)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 0.978 (6)
  • 1 in (7)
  • 1.03 in (2)
  • 1.13 in (2)
  • 1.23 (4)
  • 1.25 (2)
  • 1.25 in (3)
  • 1.250 in (2)
  • 1.28 in (4)
  • 1.34 in (2)
  • 1.41 in (4)
  • 1.563 in (2)
  • 1.61 in (2)
  • 1.63 in (3)
  • 1.69 in (2)
  • 1.772 in (2)
  • 1-1/16 in (3)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-11/32 in;34.1 mm (2)
  • 1-25/32 in (3)
  • 1-27/32 in (3)
  • 1-3/4 in (9)
  • 1-3/8 in (2)
  • 1-5/16 in (15)
  • 1-5/8 in (4)
  • 1-7/8 in (3)
  • 1-7/8 in;47.6 mm (2)
  • 1-9/16 in (2)
  • 2 in (10)
  • 2.2 (2)
  • 2.638 in (2)
  • 2.75 in;69.85 mm (7)
  • 2.78 in;70.64 mm (3)
  • 2-1/2 in (3)
  • 2-1/4 in (2)
  • 2-1/8 in (3)
  • 2-11/16 in (5)
  • 2-15/16 in (3)
  • 2-23/32 in;69.1 mm (2)
  • 2-3/16 in (2)
  • 2-7/8 in (2)
  • 3 (1)
  • 3.25 in (3)
  • 3.28 in (3)
  • 3.3 in (14)
  • 3.5 (1)
  • 3.61 in (5)
  • 3.75 in (14)
  • 3.84 in (6)
  • 3.86 in;98.04 mm (2)
  • 3.875 INCH (1)
  • 3.90 in (3)
  • 3/4 in (2)
  • 3-1/2 in (2)
  • 3-1/4 in;82.6 mm (3)
  • 3-3/4 in (2)
  • 3-3/4 in;95.3 mm (2)
  • 3-7/32 in (3)
  • 4 INCH (1)
  • 4.00 in (2)
  • 4.38 in (3)
  • 4.5 INCH (1)
  • 4-1/2 in;114.3 mm (2)
  • 4-1/4 in (3)
  • 4-23/32 in (2)
  • 4-3/32 in (2)
  • 4-3/4 in (2)
  • 5.42 in (4)
  • 5/8 in (3)
  • 6.25 (3)
  • 6.375 in;161.9 mm (3)
  • 7/8 in (3)
  • Show More...

• Wire Size

  

  • #10 AWG - #14 AWG Solid, #10 AWG - #12 AWG (19 Strand Or Less) Stranded, #10 AWG - #14 AWG (19 Strand Or Less) Stranded (Tin Bonded) (2)
  • #10 to #6 AWG (2)
  • #14 to #0 AWG (3)
  • #14 to #12 (2)
  • #14 to #8 AWG (8)
  • #16 AWG to #8 AWG (4)
  • #16 to #12 AWG (3)
  • #16 to #8 (7)
  • #16 to #8 AWG (3)
  • #16 to #8 AWG (Stranded Copper) (10)
  • #18 to #10 (2)
  • #18 to #10 AWG (11)
  • #18 to #12 AWG (5)
  • #18 to #6 AWG (4)
  • #18 to #8 AWG (19)
  • #18 to #8 AWG (Copper Conductor) (3)
  • #8 to #4 AWG (Stranded Copper) (3)
  • 0 to #14 AWG (3)
  • 0 to #18 AWG (6)
  • 12 (3)
  • 12 - 6 AWG (4)
  • 12-6 (6)
  • 14 - 0 AWG (3)
  • 14 - 10 (24)
  • 14 - 10 AWG (4)
  • 14 - 12 AWG (2)
  • 14-10 (4)
  • 18 - 0 AWG (3)
  • 18 - 10 (2)
  • 18 - 10 AWG (4)
  • 18-0 (3)
  • 18-10 (5)
  • 2 To 4/0 AWG (5)
  • 22 TO 16 AWG SOLID/STRANDED (1)
  • 250 MCM-6 AWG (3)
  • 3/0-6 AWG (2)
  • 4 (19)
  • Consult the Factory (3)
  • Max Cord: 8/3 S, 8/4 S, 10/5 S;Min Cords: 12/3 SJ, 16/3 S, 14/4 SJ, 18/4 S, 18/5 S (2)
  • Max. Cord: 10/3 S, 10/4 S, 10/5 S;Min. Cord: 16/3 SJ, 18/3 S, 18/4 SJ, 18/4 S, 18/5 S (3)
  • Show More...

• Package Quantity

  

  • 1 ct (41)
  • 1 CT;10 PK (59)
  • 1 CT;100 PK (2)
  • 1 CT;15 PK (2)
  • 1 CT;2 Pk (2)
  • 1 CT;25 PK (16)
  • 1 CT;30 PK (12)
  • 1 CT;5 PK (12)
  • 1 CT;50 Pk (16)
  • 1 PK (7)
  • 10 (3)
  • 10 CT (11)
  • 10 CT;100 PK (11)
  • 10 CT;1000 PK (3)
  • 10 CT;50 PK (11)
  • 10 PK (13)
  • 10 PK;1 CT (8)
  • 10 PK;2 CT (8)
  • 10 PK;50 PK (7)
  • 100 BX (8)
  • 100 CT (7)
  • 100 CT;1000 PK (4)
  • 100 JR (4)
  • 100 PK (8)
  • 100 PK;10 CT (3)
  • 100 PK;25 CT (8)
  • 100 Pouch;1 CT;1000 PK (2)
  • 1000 BX (2)
  • 1000 CA (6)
  • 12 CT (2)
  • 12 CT;120 PK (3)
  • 2 CT;10 PK (4)
  • 2 PK (4)
  • 2 PK;10 PK (2)
  • 20 CT (4)
  • 20 CT;1 PK (2)
  • 20 CT;100 PK (2)
  • 20 CT;200 PK (2)
  • 24 CT (2)
  • 25 (2)
  • 25 CT (17)
  • 25 CT;1 PK (2)
  • 25 CT;100 PK (13)
  • 25 CT;250 PK (14)
  • 25 CT;50 PK (4)
  • 25 PK (11)
  • 25 PK (Inner);100 PK (Outer) (3)
  • 25 PK;1 CT (6)
  • 25 PK;100 PK (6)
  • 25 PK;250 PK (2)
  • 250 PK (2)
  • 250 PK;25 CT (10)
  • 250 PK;50 CT (2)
  • 5 CT (9)
  • 5 CT;1 PK (4)
  • 5 CT;25 PK (9)
  • 5 CT;50 PK (2)
  • 5 PK (10)
  • 5 PK (Inner);25 PK (Outer) (3)
  • 5 PK;25 PK (7)
  • 50 CT (10)
  • 50 CT;200 PK (8)
  • 50 CT;500 PK (9)
  • 50 JR (2)
  • 50 PK (7)
  • 50 PK;500 PK (6)
  • 500 BG (8)
  • 500 PK (3)
  • 500 PK;50 CT (4)
  • 6 CT (4)
  • 6 CT;60 PK (2)
  • 6 PK (3)
  • 6 PK;1 CT (3)
  • Show More...

• Special Features

  

  • 1,000V Maximum In Fixtures And Signs;Deep, Wide-Throated Skirt Protects Against Flash-Over And Turned-Back Strands For Maximum Dielectric Protection;Features: Five Color-Coded Models Cover Common Construction Wire Ranges;Fixed, Square-Wire Spring Threads Itself Creating Secure Pressure Grip;Green Model Designed For Ground Connections;Model Number: WT41;UL 486C Listed (WGR UL 467 Listed) And CSA C22.2 #188 Certified;Unique Contoured Wing Design Acts As Built-In Wrench Providing Maximum Torque With Minimum E (3)
  • 1/2" Knockout Saddle-Type Connector with Spring Set Screw;Concrete Tight when Taped (2)
  • 3 selectable color temperatures: 2700K, 3000K and 4000K, 90 CRI (4)
  • 4Q fittings have plain throat (non-insulated);Bonding wedge locknuts are recommended in hazardous locations;Compact, slim diameter with small turning radius;Furnished with locknut and knockout sealing ring;Hot dip or mechanically galvanized finish optionally available;Inspection windows in ferrule to ensure full en;Intrinsically safe;Liquidtight/raintight/oiltight/concretetight;Long ferrule prevents pullout and tight bend conduit pop-out;O-Z/Gedney fittings are used with liquidtight flexible metal conduit (3)
  • 5/8 to 3/4 in Rod - 3/8 in Pipe Size (2)
  • 50 Micron Gold Plated Contacts (2)
  • Aluminum construction resists corrosion. Neoprene grommet seals out oil and moisture. Nylon retention ring ensures superior holding power. (9)
  • Aluminum Cord Connector Provides Durable Performance (2)
  • Aluminum Cord Connector Provides Durable Performance;Knurled Finish Makes Them Easy to Handle and Maintain UL Listing by Hand Tighteningul Listing by Hand Tightening;Lightweight Design (10)
  • Auto Grip Straight Body;Wiring Type Back Wire (3)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (2)
  • Chemical Resistant;For Corrosive Environment;Non-Burning;Non-Dipping Thermoplastic Material (3)
  • Chemical-impact resistant, color coded terminal screws (2)
  • Clamp Type Connector (4)
  • Classic Fin Design Provides Secure Grip For Extra Leverage On Maximum Wire Combinations (7)
  • Clean, flush mount appearance, snap-on end caps hide mounting screws, metal swing bracket (2)
  • Cold Forged from Pure Electrolytic Copper with 99 Percent Conductivity (2)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;Copper free (4/10 of 1 PCT or less) aluminum cap;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension (4)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Machined steel cap;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord;Steel or Tefl (5)
  • Commercial Grade (3)
  • Comml grade plugs & conns (6)
  • Compact Design (3)
  • Compact design with small turning radius;Copperfree (4/10 of 1 PCT of copper or less) aluminum;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;Full, machined tapered threads (NPT);High corrosion resistance;Machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and other applications that require flexibility and protection against entry of liquids, vapors or solids;Seals out (2)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Steel compression nut;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (3)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (8)
  • Concrete Tight (20)
  • Concrete Tight;Threadless (7)
  • Concretetight (17)
  • Concrete-Tight (25)
  • Concrete-tight when taped (4)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (21)
  • Connector provides a smooth, gradual radius bend (2)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (4)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (5)
  • Coordinated Performance with T&B Liquidtight Systems Flexible Metallic Conduits;Ingress Protection Ratings Aligned with Industrial Enclosures;Safe Edge(R) Ground Cones Provide Superior Bonding;Double Bevel Sealing Ring Eases Assembly and Insures Seal Tight Performance;Heat Curled Insulators Protect Wire Sheathing from Damage (22)
  • Copper connectors, mounting brackets, covers, hardware and instructions (6)
  • Corrosion resistant turnlock locking device (11)
  • Corrosion Resistant;One-Piece Design with Machined Threads;Tapered Interior Seats the Bushing Evenly for a Liquidtight Seal (2)
  • Double Dovetail Design Provides Superior Protection Against Cord Pull-Out Forces;New-Design External Cord Grips Provide Visible Assurance Of Safe and Proper Cord Retention (2)
  • Double Dovetail Design Provides Superior Protection Against Cord Pull-Out Forces;New-Design External Cord Grips Provide Visible Assurance Of Safe and Proper Cord Retention;3 Phase (2)
  • Ease of assembly and disassembly of STNM connectors permits make-up of harnesses in advance for fast, simple connections during production line assemblies;Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals;It cannot bend or twist the conduit and thereby protects wiring;The nut rides only on the sleeve and not on the conduit;The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wal (10)
  • Easy installation - No tools needed;Save time and money;Removable with a screwdriver (3)
  • Easy Installation;No Special Tools Required (12)
  • Easy Installation;Removal, Reusable (2)
  • Easy, Push-In Installation (2)
  • EdgeConnect™ Technology, Screwless Termination (12)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Excellent Conductivity;Double Dovetail Design (12)
  • Excellent Conductivity;Double Dovetail Design;Raised Ribs Provide Non-Slip Gripping Profile For Turning to Lock and Unlock (9)
  • Extended Range with Superior Strain Relief;Reduced Overall Size, Fits Into tighter Spaces;Gland Nut Designed to Restrict Cable Bending (2)
  • External Cord Clamp Provides Maximum Strain Relief;Box Terminal With Hex Socket Threaded Slug, Permits High Clamping Pressure On Conductors Without Damaging Strands (3)
  • Fast and Easy Installation (2)
  • Features: Easily Installation, No Tools Required, 60 Pound Test Pull (2)
  • Features: F Connectors Utilize Threaded Couplings And Cable Conductors As Contacts For CATV And Other UHF Applications; After Cable Is Stripped, Simply Twist On Connector; No Termination Tool Required; Available In Two Styles, RG-6 And 59; Coaxial Cable Type: RG-6 (2)
  • Features: Nickel-Plated, Brass-Construction For Superior Corrosion Resistance; Moisture-Inhibiting Design; Approved For Indoor And Outdoor Use; Use 30-793 Compression Tool; 75 OHM Nominal Impedance; Gold-Plated Pin Contact Area; Available In Plenum Versions; Nominal Impedance: 75 OHM; Dielectric Diameter: 0.175 - 0.183 IN; Coaxial Cable Type: RG-6; Overall Jacket Diameter: 0.260 - 0.305 IN (2)
  • Features: Non Insulated, For Rigid Conduit (2)
  • Features: No-Twist Connection Reduces Repetitive Motion Fatigue; Low Insertion Force For Fast And Easy Connections; Compact Size Makes Installation Easy; Clear Shell Gives Visual Verification Of Connection; UL Listed To 486C And CSA Certified To C22.2 #188; UL 467 Listed For Grounding And Bonding Applications; 600V Maximum Building Wire, 1000V; Maximum Signs And Lighting Fixtures; Shell Rated To 105 DEG C; Tough, UL 94V-2 Flame-Retardant Shell Rated At 105 DEG C (221 DEG F); Model: 39 (2)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Fits 60 Pct Reg/Tri/Quad Cable;Nickel-Plated, Brass-Construction for Superior Corrosion Resistance;Approved for Use By Satellite and Cable Tv Companies;Approved for Indoor and Outdoor Use;Use 30-603, 30-793 or 30-633 Compression Tools (3)
  • Five Color-Coded Models Cover Common Construction Wire Ranges (8)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (14)
  • Flame Retardant (9)
  • Flexible Skirt covers over strip and conforms to fit into tight spaces - Fixed precise square wire spring provides secure gripping of conductors - Flame retardant UL 94V-2 thermoplastic shell provides excellent electrical insulation - Zinc-plated spring for low contact resistance (4)
  • Flush Mounted (2)
  • Furnished with 2-way Phillips/Slotted Head Screw (23)
  • Furnished with locknut; Male hub threads-NPS (2)
  • Furnished with Tri-Drive screw (8)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (4)
  • HCF (3)
  • Hcf/Hcfmci-A (6)
  • Hex Design Bolts are Machined from High-Conductivity Bronze Alloy (6)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (4)
  • Individual Wiring Terminals Completely Enclosed;Fast Lead Assembly Screws;Beveled Housing Prevents Snagging (3)
  • Industrial grade plugs & conns (3)
  • Industrial grd high current plugs & conn (5)
  • Industrial grd plugs & conns (17)
  • Install from outside or inside outlet box or enclosure. (2)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 degree C (2)
  • IP20 (3)
  • Liquid Tight and Water Tight Protection (6)
  • Liquid Tight;Strain Relief (8)
  • Liquidtight fittings are used with metallic and non-metallic conduit to seal out water, oil, and dust in applications food processors, beverage & chemical plants, plastics fabricators, machine shops, etc. (5)
  • Locking Device California Standard (2)
  • Locking Device, impact resistant (14)
  • Long Barrel;High Conductivity (2)
  • Low-profile, unobtrusive appearance. Blends with any dTcor or setting. ScuffCoat finish, tough, durable, scratch-resistant can be overpainted with latex paint. Fittings have removable covers which allow easy access to wiring for changes and additions. (2)
  • Made of 1350 Aluminum Alloy for High Strength and High Conductivity;Standard Compression Tools and Dies Install all Sizes;No Special Tools Needed;Field-Proven Ribbed Design Enables Excellent Connector/Conductor Contact Without Distorting the Conduct (2)
  • Material Flame Retardant Polypropylene (3)
  • Meets Coast Guard CG293 (8)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation;Transparent Wiring Guide to Verify All Wire Strands Are In Place Before Securing Wire (2)
  • Multiple Seal Plug/Connector Interface Keeps Out Contaminants;Resists Vapor And Water From High-Pressure Wash Down Up to 1000psi;Floating Blade Construction Provides Self-Alignment, And A Better Mechanical And Electrical Connection Minimizing Wear And Heat Generation (2)
  • NEMA 3R Enclosure (6)
  • Nylon Cord Connector Resists Most Common Industrial Corrosives;Provides Effective Pullout Protection;Lightweight Design (3)
  • Oil Tight, Furnished With Sealing Ring and Locknu (6)
  • Oil Tight, Furnished With Sealing Ring And Locknut (4)
  • Ordinary, Wet, or Dry Locations;Extended Range with Superior Strain Relief (11)
  • Plastic Insulator Rated 105 Degree C (6)
  • Provide Exceptional Durability and Performance;Floating Blade Construction Provides Self-Alignment and a Better Mechanical and Electrical Connection Minimizing Wear and Heat Generation (2)
  • Provide strain relief to protect the cord or cable;UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (6)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (11)
  • Push-On Installation;No Tools (17)
  • Quick drive assembly screws, floating blades, rubber body construction, multiple ring seals (2)
  • Raintight (3)
  • Raintight/Concrete-Tight (2)
  • Rated watertight for 1,500 psi high-pressure hosedown, P&S Turnlok® watertight plugs & connectors feature rugged construction, multiple seals to ensure protection against the environment and ease of installation. (17)
  • Ready to wire, nylon housing, rugged 2pc cord grip (3)
  • Ready to wire, rugged 2pc cord grip & internal dust shield (2)
  • Retrofit, Insulated Throat (2)
  • Reusable;Easy tool-Free Installation (3)
  • RJ25 Configuration;Wall Plated Mount (5)
  • Robust spring design for high performance holding power (6)
  • Rubber Housing;Nickel Plated Blades & Contacts (2)
  • Rugged Construction protects Cord from Damage;Compact Design Permits close Spacing of Fittings on panel Applications;Tightening One Nut Creates Watertight Seal;Male Tapered Thread NPT (12)
  • Safety Grip Straight Body;Wiring Type Back Wire (2)
  • Safety Grip Straight Body;Wiring Type Side Wire (2)
  • Sealing Ring and Groove with Innovative Profile Better Than Standard O-Ring (10)
  • Sealing Sleeves on all Conduit Openings;PVC Coated Connector Work Together to Seal Out Water and Other Corrosive Liquids, Protecting the Conductors from Damage (3)
  • Secure Grip;Cord Grip Design Protects Terminations From Excess Strain;Clear, Funnel Shaped Wire Entry For Ease Of Termination (3)
  • Silicone-Based Sealant Protects Against Moisture and Corrosion;Easy to Apply Pre-Filled Twist-On Wire Connectors (3)
  • Single-Channel Capacity;Male Connect (2)
  • Smooth Body Design (2)
  • Spec grade plugs & conns (3)
  • Specifically Created For The Residential Markets;The T/R+ Replaces The Yellow;Tan and Red Connectors In The Majority Of Field Applications (2)
  • Standard (6)
  • Standard Product (41)
  • Straight (2)
  • Superior Cord Grip Design Protects Terminations From Excess Strain;Clear, Funnel Shaped Wire Entry For Ease Of Termination (6)
  • T&B Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit (1)
  • Tapered (NPT) Threads (2)
  • The Dual Internal sealing rings create a raintight seal. (3)
  • The metal body of zinc fittings bonds to the metal (2)
  • Time-Tested Design;3 Phase (3)
  • Turnlock, locking device, quick thread assembly, rounded back contour, impact & corrosion resistant, new design external cord grips (12)
  • Ultra Grip;3 Phase;Back Wire Terminal Clamps For Easy Secure Wiring (6)
  • Ultra Grip;Back Wire Terminal Clamps For Easy Secure Wiring (4)
  • Ultrasonically Welded Together for Unrivaled Strength (9)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Watertight (15)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • Watertight locking (11)
  • Watertight, rubber body construction, closure cap, nickel plated blades, multiple seals between plug/connector (2)
  • Watertight;Wiring Type Back Wire;3 Phase (4)
  • With Cover (3)
  • Show More...

• Application

  

  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree Male- Form 2 (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (14)
  • Anywhere power needs to be distributed to more than 1 load (2)
  • Armored Cable;Metal Clad Cable;MCI-A Cable;Flexible Metallic Conduit to a Box or Enclosure;Dry Appliations (3)
  • Cable Installation (5)
  • Commercial (29)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (14)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (11)
  • Commercial;Industrial;Wet Location (7)
  • Commercial;Non-Hazardous Location (4)
  • Commercial;Video, Data and Telephony Applications (3)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (4)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Dust Tight, Hazardous Location, Indoor, Electrical Enclosure, Machine Tool, Potable Power Tool (2)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (7)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (3)
  • Electrical (12)
  • Existing 1/2 in or 5/8 in wall with 4 in hole saw. (3)
  • Exterior Area and Security Lighting;Outdoor Power Outlets;Decorative Patio & Deck Lighting;Marine Shore-Power and Dock Lighting;Traffic-Signal Control Circuits;Outdoor Signage;Basement;Garage;and Car-Port Circuits;Bathroom/Spa Vent Fans;Automatic Carwashes;Industrial Hosedown/Washdown (3)
  • Extra Hard Use (5)
  • Extra Heavy Duty Industrial (17)
  • For AC - MCI-A - HCF steel and aluminum cable (4)
  • For CCTV System Installations/Integrations And General Purpose Applications on RG 6 Cable (2)
  • For Combinations of Aluminum to Aluminum and Aluminum to Copper Conductors (2)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For copper to copper connections, for grounding of steel structures or transformers using one or two cables, for tapping one or two cables from bus bar (5)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (9)
  • For Grounding And Bonding Applications (3)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (2)
  • For Liquidtight Flexible Metal Conduit (16)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (7)
  • For Threaded Couplings And Cable Conductors As Contacts For CATV And Other UHF Applications (4)
  • For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box (5)
  • For use with EMT conduit (10)
  • For use with non-metallic sheathed cable (1)
  • For Use with Rigid/IMC Conduits (4)
  • For use with SNA terminal blocks (2)
  • For Used To Ground And Secure Nonmetallic Sheathed And Service Entrance Cable to Boxes And Enclosures (2)
  • Grounding and Bonding Applications (2)
  • Grounding Wire (6)
  • Hazardous Location (4)
  • Hazardous Locations;Ordinary Location;Wet/Dry Locations (2)
  • Heavy Duty (2)
  • Heavy Duty Industrial (23)
  • High-pressure washdowns. Particle build-up. Condensation. Corrosive substances. Food and beverage processing plants can be harsh, challenging environments. Fortunately, we have a full menu of electrical devices that keep things running smoothly while protecting people and equipment. IEC PIN & SLEEVE DEVICES Watertight Plugs & Connectors ¦ Thermoplastic elastomer body resists water, oils, lubricants and soaps while maintaining NEMA 4, 4X, 6, 6P, and IP65, 66, 67 ratings ¦ Ideal for washdown areas — rated wa (17)
  • High-quality, corrosion-resistant, liquidtight termination for LTA flexible aluminum conduit (7)
  • Ind Facilities & Factories - Facility - Other (38)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (10)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (7)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (7)
  • Indoor (2)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Industrial (104)
  • Industrial Spec Grade (14)
  • Industrial/Commercial (22)
  • Insulating or Joining 1 or more aluminum to copper conductors (2)
  • Insulating or Joining 1 or more conductors (22)
  • Insulating or Joining 2 or more conductors (2)
  • lighting (6)
  • moisture proof electrical connection for type U.F.-B underground feeder cable rated for 600 volts (Copper Wire Only) ranging from #14/3 without ground wire up to #8/3 with ground wire. (2)
  • New work and Retrofit (2)
  • New Work in Poured Concrete;Maintenance, Repairs and Alterations;Connections at Panels and Boxes;New Altered or Damaged Stub-Ups;Applicable Locations Where Field Threading is Impractical or Undesirable (7)
  • NM Cable (10)
  • NM Sheathed Cable (2)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • Outdoor (18)
  • Outdoor;Non Metallic Liquid Tight Conduit Type B;Material;Plastic;Type;Screw On Straight Connector;Color;Gray 0;Size;1 Ph;Description;Pvc 065360 1/2 St Scr On Conn;Form;Form B;Category Description;Non-Metallic Fittings;Special Features;1.44in Length X 1. (2)
  • Provide a Liquidtight and Strain Relief Termination for Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable;For use in Wet or Dry Locations Sealing Electrical Connections Against Dust and Dirt;Oil;Water or Other Atmosphere Containing Moisture (8)
  • Provide a Means for Passing a Cord Cable Into an Enclosure Through a Bulkhead or Into a Rigid Conduit;Form a Mechanical Grip and Water and/or Oil-Resistant Seal for Cord;Form a Non-Slip Connection or Termination for Flexible Cord (11)
  • Provide a Means for Passing a Cord Cable Into an Enclosure;Form a Watertight seal for Cord;Provide Pull-Out Protection for Cord;Ensuring a secure Connection (12)
  • Residential and commercial wiring jobs (6)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - Other (4)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (2)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Splicing Wire (22)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Straight Male- Form 1 (3)
  • Straight Male- Form 2 (4)
  • Straight Male- Form 3 (3)
  • Straight Male- Form 4 (5)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • Suitable for Use In Hazardous Locations Where General Purpose Equipment is Specifically Permitted by NEC 501-4(B) (8)
  • T&B Bullet meets performance requirements when terminating Type B liquidtight non-metallic conduit or flexible non-metallic tubing to a box or enclosure with knockout opening or threaded hub (13)
  • TELEPHONE (2)
  • Terminate, Splice, Tap Power Connectors (9)
  • Terminating an F Style connection onto RG 6 Quad Coax . (2)
  • Termination of an F Type Connection;Compression Style RG6 (3)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box or Enclosure, or to Couple Ends of Threadless Conduit (5)
  • To Connect and Effectively Bond Threadless Rigid Metal Conduit/Intermediate Metal Conduit to a Box/Enclosure or to Couple Ends of Threadless Conduit (4)
  • To Connect Threaded Metal Conduit to a Threadless Opening in a Box or Enclosure (10)
  • To ground and secure EMT Raceways to boxes and enclosures (11)
  • To positively bond conduit to box or enclosure (7)
  • To Provide a Liquidtight;Dust Tight Connection Between Flexible, Non-Metallic Conduit and a Box or an Enclosure (3)
  • UL Listed (2)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electric Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing require (6)
  • Use to secure and seal cords or cables entering enclosures or raceways. Z Series connectors are also suitable for use in hazardous locations per National Electrical Code (Articles 501-4(b), 502-4(a&b), 503-3(a&b)). Consult these articles for sealing requi (2)
  • Use with metallic and non-metallic conduit to seal out water, oil, and dust in applications for food processors, beverage and chemical plants, plastics fabricators, machine shops, etc. Liquidtight connectors are also suitable for use in hazardous location (5)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (9)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to join EMT to box or enclosure. Concrete/Raintight (2)
  • Used to join EMT to box or enclosure. Concrete tight. (20)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (2)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to secure steel EMT to box or enclosure. concrete tight when taped (2)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (3)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used Where Flexible Metal Raceway is Installed in Outdoor or Indoor Locations Where Exposed to Continuous or Intermittent Moisture (27)
  • Vehicles: On-Road - PickUp & Delivery: Food (2)
  • Voice/Data/Video Tools (2)
  • Wet Location (16)
  • Wet Location;Hazardous (18)
  • Wire Termination (25)
  • Wireway Accessory (2)
  • Wiring Enclosure, Pendant Station, Hand Tool, Construction, Processing and Material Handling Equipment, Pump, Motor and Machine Tool, Hazardous/Wet Location (2)
  • Show More...

• Weight

  

  • 0.0006 lb/EA (2)
  • 0.01 lb (14)
  • 0.01 lb/EA (2)
  • 0.02 lb (3)
  • 0.02 lb/EA (7)
  • 0.03 lb (2)
  • 0.03 lb/EA (4)
  • 0.038 lb/EA (2)
  • 0.04 lb (3)
  • 0.04 lb/EA (4)
  • 0.049 lb/EA (2)
  • 0.05 lb/EA (7)
  • 0.058 lb/EA (2)
  • 0.06 lb/EA (4)
  • 0.062 lb/EA (3)
  • 0.068 lb/EA (2)
  • 0.07 lb/EA (4)
  • 0.076 lb/EA (2)
  • 0.08 lb/EA (10)
  • 0.082 lb/EA (2)
  • 0.09 lb/EA (4)
  • 0.1 lb/EA (10)
  • 0.11 lb/EA (3)
  • 0.12 lb/EA (2)
  • 0.13 lb/EA (3)
  • 0.138 lb/EA (2)
  • 0.14 lb/EA (6)
  • 0.15 (2)
  • 0.15 lb (6)
  • 0.15 lb/EA (3)
  • 0.17 lb/EA (2)
  • 0.18 lb (2)
  • 0.18 lb/EA (2)
  • 0.2 lb (6)
  • 0.2 lb/EA (5)
  • 0.2000 lb (2)
  • 0.21 lb/EA (3)
  • 0.22 lb/EA (5)
  • 0.2200 lb (6)
  • 0.24 lb/EA (2)
  • 0.2400 lb (3)
  • 0.25 lb (7)
  • 0.25 lb/EA (3)
  • 0.2500 lb (2)
  • 0.26 lb (2)
  • 0.26 lb/EA (2)
  • 0.27 lb/EA (2)
  • 0.3000 lb (2)
  • 0.33 lb (2)
  • 0.34 lb (6)
  • 0.34 lb/EA (2)
  • 0.35 lb (8)
  • 0.35 lb/EA (2)
  • 0.36 lb/EA (4)
  • 0.37 lb (3)
  • 0.38 lb (3)
  • 0.39 lb (2)
  • 0.4 lb (5)
  • 0.4 lb/EA (2)
  • 0.41 lb (2)
  • 0.41 lb/EA (2)
  • 0.44 lb (2)
  • 0.45 lb (3)
  • 0.46 lb (2)
  • 0.5 lb/EA (2)
  • 0.52 lb/EA (3)
  • 0.55 lb/EA (4)
  • 0.67 lb (3)
  • 0.72 lb (2)
  • 0.73 lb (2)
  • 0.77 lb (2)
  • 1 lb (4)
  • 1 lb/EA (3)
  • 1.25 lb (4)
  • 1.6 oz (45 g) (4)
  • 10 lb/100 (6)
  • 11.3 lb/100 (2)
  • 13 lb/100 (2)
  • 137.5 lb/100 (2)
  • 14 lb/100 (6)
  • 15.00 lb/100;6.80 kg/100 (2)
  • 19 lb/100 (3)
  • 20 lb/100 (2)
  • 23 lb/100 (2)
  • 25 lb/100 (2)
  • 37.5 lb/100 (3)
  • 50 lb/100 (3)
  • 6 lb/100 (2)
  • Show More...

• Amperage

  

  • 15.0 (27)
  • 20.0 (42)
  • 30.0 (43)
  • 50.0 (22)
  • Show More...

• Manufacturer Status

  

  • Inactive (32)
  • Non-Stock (32)
  • Show More...

• Category Description

  

  • ALL PLASTIBOND FITTINGS (15)
  • Breaker Connector and Mounting Kits & Other Accessories (8)
  • COAX CABLE (1)
  • Commercial cord connectors (7)
  • Commercial receptacles (3)
  • Comp & Mech Lugs and Butt Splices (31)
  • CORD CONNECTORS & CORD GRIPS (233)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (3)
  • Datacom Wiring Devices and Accessories (77)
  • DIECAST EMT FITTINGS (11)
  • DIECAST OFFSET & CHASE NIPPLES (3)
  • FASTENERS (4)
  • FLEX & MC FITTINGS (102)
  • FORM 5 CONDULETS, COVERS, & GASKETS (18)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (7)
  • FUSE BLOCKS,FUSE HOLDERS (3)
  • Fuses & Fuse Accessories (36)
  • HAND TOOLS (2)
  • Industrial cord connectors (123)
  • Industrial receptacles (3)
  • Led Lighting (2)
  • LED SPECIALTY LAMPS & MODULES (5)
  • LED TRACK, RAIL, TASK & UNDERCABINET LIGHTING (10)
  • METALLIC FITTINGS (109)
  • MISC FITTINGS (2)
  • Miscellaneous residential devices (3)
  • NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES (146)
  • NON-METALLIC FITTINGS (61)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (6)
  • Pin & Sleeve Devices (9)
  • PLUG FUSES (1)
  • Portable Cords, Voice, Data, Video Wire & Cable (2)
  • PROXIMITY SWITCHES AND CORDSETS (6)
  • PVC CONDULETS (1)
  • Residential cord connectors (14)
  • Residential receptacles (42)
  • Residential Switches (2)
  • RIGID COUPLINGS (1)
  • ROMEX CONNECTORS (18)
  • SENSORS (2)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (19)
  • SPLICE KITS (47)
  • SPLIT BOLTS (43)
  • STEEL EMT FITTINGS (110)
  • STEEL WIRE WAY JUNCTION BOXES (6)
  • STRUT CHANNEL (3)
  • T&B C TAP LUGS (3)
  • TERMINAL BLOCK ACESSORIES (6)
  • TERMINAL BLOCKS POWER DIST BLOCKS (2)
  • TERMINALS (7)
  • TRANSFORMER ACCESSORIES (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (43)
  • WEATHERPROOF BOXES & COVERS (3)
  • WIRE NUTS (68)
  • Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds (2)
  • Show More...

• Poles

  

  • 1 (23)
  • 2 (91)
  • 2-Pole (28)
  • 3 (13)
  • 3-Pole (31)
  • 3-way (34)
  • 4-Pole (2)
  • 4-Way (7)
  • Consult the Factory (4)
  • Show More...

• Number Of Phases

  

  • 1.0 (8)
  • 3.0 (24)
  • Show More...

• Number Of Conductors

  

  • 1 (48)
  • 1 Cable (12)
  • 2 (13)
  • 2 to 6 (7)
  • 3 (13)
  • 3-Wire Grounding (3)
  • 4 (13)
  • 4-Wire Grounding (2)
  • 5 (1)
  • 6 (1)
  • 8 (1)
  • Single (37)
  • Show More...

• Trade Size

  

  • 0.5 (5)
  • 0.75 (3)
  • 1 (28)
  • 1 in (20)
  • 1 INCH (5)
  • 1/2 (18)
  • 1/2 in (46)
  • 1/2 INCH (6)
  • 1-1/2 (21)
  • 1-1/2 in (13)
  • 1-1/2 INCH (3)
  • 1-1/4 (19)
  • 1-1/4 in (13)
  • 1-1/4 INCH (2)
  • 2 (17)
  • 2 in (22)
  • 2 INCH (3)
  • 2-1/2 (7)
  • 2-1/2 IN (10)
  • 2-1/2 INCH (2)
  • 3 (12)
  • 3 in (9)
  • 3 INCH (3)
  • 3/4 (21)
  • 3/4 in (47)
  • 3/4 INCH (7)
  • 3/8 (10)
  • 3/8 in (21)
  • 3-1/2 (8)
  • 3-1/2 in (2)
  • 3-1/2 INCH (1)
  • 4 (11)
  • 4 in (4)
  • 4 INCH (1)
  • Show More...

• Voltage

  

  • 120.00 LBS (2)
  • 120/208 V (6)
  • 125.0 V (32)
  • 125/208 V (2)
  • 125/250 V (12)
  • 250.0 V (31)
  • 277.0 V (4)
  • 277/480 VAC (2)
  • 300.0 V (4)
  • 480.0 V (22)
  • 600.0 V (13)
  • Show More...

• Connection Type

  

  • Back Wire (9)
  • E-Z Lock(R) (2)
  • F (3)
  • FMC (11)
  • Liquidtight (6)
  • M12 x 1 Plug-In Connection (4)
  • NPT (11)
  • PIGTAIL (1)
  • Screw (3)
  • Screw Terminal (3)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (3)
  • Set Screw (10)
  • Single Screw Strap-Type (2)
  • Snap-In (17)
  • Squeeze (16)
  • Straight (39)
  • Straight Male (18)
  • Threaded (52)
  • Threaded Hub (8)
  • Threaded x Push In (6)
  • Threaded x Screw-In (13)
  • Type F (6)
  • Show More...

• Mounting

  

  • 1/2 Mounting Hole (2)
  • Cable (1)
  • Connector (13)
  • Cord (55)
  • Device, Wall (2)
  • FLUSH (1)
  • Locknut or Tapped Opening (37)
  • None (2)
  • Plug (19)
  • PLUG IN (1)
  • Push In (5)
  • Receptacle (15)
  • SCREW (2)
  • Screw Mount (13)
  • Snap In Mount (2)
  • track (1)
  • Under Cabinet (4)
  • WALL (7)
  • Show More...

• Connector Type

  

  • Compression (47)
  • E-Z Lock® (3)
  • FMC (23)
  • Jacketed MC/TECK (2)
  • Liquidtight (13)
  • PUSH-EMT® (4)
  • RJ45 (3)
  • Screw-In (4)
  • Screw-In, Insulated (6)
  • SET SCREW (27)
  • Snap (2)
  • Squeeze (17)
  • Squeeze, Insulated (8)
  • Steel Raintight/Concrete-Tight Insulated (7)
  • STRAIGHT (12)
  • STRAIGHT MALE (4)
  • Straight Nonmetallic (9)
  • Straight, Insulated (3)
  • Two Screw, Strap Type (4)
  • Two-Screw, Strap Type (10)
  • Type F (2)
  • Show More...

• Enclosure Type

  

  • Class I Div 2;Class II Div 1 and 2;Class III;NEMA 3R (8)
  • Nema 4 (12)
  • NEMA 4/4X/12/13 (18)
  • NEMA 6 and 4X (4)
  • NEMA FB-1 (6)
  • Show More...

• Operating Temperature

  

  • -40° to 158°F (-40° to 70°C) (6)
  • -40°-60°C (18)
  • -40°-75°C (4)
  • Show More...

• Type

  

  • 45 DEG (1)
  • 45 Degree (7)
  • 90 DEG (2)
  • 90 Degree (9)
  • 90 Degree Liquidtight Non-Insulated Connector (2)
  • 90° Male (2)
  • 90º Cord Connector (2)
  • Accessory (10)
  • Aluminum Double Lug (4)
  • Aluminum Lay-In Lug (3)
  • Aluminum Single Lug (3)
  • Armored Cable/Flexible Metal Conduit Fittings (1)
  • Auto grip (4)
  • BNC (2)
  • Bullet-45 Degree (2)
  • Bullet-90 Degree (5)
  • Bullet-Straight (6)
  • BUTT (1)
  • Cable Connector (2)
  • California Style Turnlock Receptacle (2)
  • Color Coded Locking (13)
  • Commercial Lay-in Hinged-Cover Type 1 Wireway;U-Connector (2)
  • COMPRESSION (4)
  • Compression Connector (21)
  • Compression Couplings & Connectors (4)
  • CONDUIT CONNECTOR (1)
  • CONNECTOR (270)
  • Connector Body (28)
  • Connector, Straight Blade (2)
  • Connectors (11)
  • Connectors-45 Degree (1)
  • Connectors-90 Degree (6)
  • Connectors-Straight (31)
  • Copper Connectors (2)
  • Copper Split Bolts (2)
  • Cord Connectors-Straight (1)
  • Cord grip (12)
  • Cord Grips (12)
  • Double Sided Entry (2)
  • Dual-Rated Mechanical Connector (12)
  • EMT (2)
  • EMT Conduit Fittings (15)
  • EMT Conduit Straight Compression Connector (10)
  • Extra heavy-duty angled plug (4)
  • FITTING (7)
  • Fixture Accents/Parts (5)
  • Flanged Inlet (1)
  • Flex (4)
  • Floor Box (2)
  • F-Type (10)
  • GAR (2)
  • Grounding Connectors-Straight (6)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (2)
  • Heavy-duty universal NEMA power plug (3)
  • H-Type Compression Tap Connector (2)
  • Hub Connector (11)
  • Insulation Displacement (12)
  • JACK (2)
  • LED Luminaire (5)
  • LED Tapes (2)
  • Liquidtight connector (11)
  • LOCKING CONNECTOR (8)
  • LOCKING PLUG (7)
  • Locking, Plug (8)
  • Long Barrel - One Hole (2)
  • Low Profile Strain Relief Cord Connector (10)
  • Mechanical Grounding (6)
  • Mechanical Split Bolt Connector (2)
  • Model 62® Connector (2)
  • MODULAR (2)
  • No Thread Connector (2)
  • Outlet (8)
  • Panelboard Lug (4)
  • PIGTAIL (1)
  • PLUG (37)
  • Plugs (21)
  • POLARIZED (1)
  • Power - Trac Systems (1)
  • Pro grip California standard (6)
  • Push In Wire Connectors (3)
  • Push-In (3)
  • Push-In Connector (29)
  • Raintight Compression (3)
  • RECEPTACLE (5)
  • Receptacle adapter (2)
  • Red/Yellow (2)
  • RING (1)
  • Safety grip (4)
  • Sconce Box (3)
  • Secure Grip Wire Connectors (6)
  • Service Post Connectors (4)
  • Set screw type connector (2)
  • Severe duty (2)
  • Single Flush Receptacle (7)
  • Single Sided Entry (2)
  • Snap-on (14)
  • Splice Kit (3)
  • Split-Bolt (1)
  • Squeeze Connectors (3)
  • ST Series 45 DEG Liquidtight Connector With Plain Throat (2)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (6)
  • ST Series Straight Liquidtight Connector With Plain Throat (11)
  • Standard locking (2)
  • Standard Wire Connectors (6)
  • Steel Cord Grips (10)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (5)
  • STRAIGHT (11)
  • Straight Blade Connector (5)
  • Straight Blade, Connector (2)
  • Straight Cord Connector (8)
  • Straight Liquidtight Non-Insulated Connector (2)
  • Straight Liquidtight Strain Relief Connector (17)
  • STRAIGHT MALE (34)
  • Strain Relief Cord Connectors-Straight (8)
  • Tan/Red (2)
  • Terminal blocks (2)
  • Threadless Connector (9)
  • Three way "T" connector (4)
  • Tubular photoelectric sensor (6)
  • Turnlock Plug (3)
  • Turnlock Receptacle (4)
  • Turnlock Single Receptacle (9)
  • Twist-On (2)
  • Type SR Gold Seal Strain Relief Straight Connector (7)
  • UF Connectors (2)
  • Ultra grip (31)
  • Wallplate with connector (3)
  • Watertight (15)
  • Watertight locking plug (2)
  • Wide Range Tap Connectors (4)
  • Winged Wire Connectors (10)
  • WIRE (3)
  • Wireway connector (4)
  • Show More...

• Used On

  

  • EMT CONDUIT (4)
  • Liquid Tight Conduit (3)
  • Liquidtight Conduit (8)
  • Liquidtight Conduit to Wire Motor, Transformer, Processing Equipment, Pump (14)
  • Show More...

• Size

  

  • 0.75 (3)
  • 0.780 IN Length X 086 IN Width X 0.450 IN Height (2)
  • 1 (39)
  • 1 1/2 (5)
  • 1 1/4 (8)
  • 1 in (6)
  • 1 INCH (15)
  • 1" NPT (3)
  • 1.13 in x 0.55 in x 1.1 in (2)
  • 1.29 in x 0.55 in x 1.1 in (3)
  • 1.49 In Diameter X 7.14 In Length (2)
  • 1.5 in (2)
  • 1.50 in Diamater X 3.88 in Length (4)
  • 1.53 in x 1.53 in x 1.97 in (2)
  • 1.53 in x 1.53 in x 2.78 in (3)
  • 1.56 in x 0.5 in x 2.3 in (2)
  • 1.85 in x 1.85 in x 4.62 in (2)
  • 1.88 in x 1.88 in x 2.45 in (2)
  • 1/2 (50)
  • 1/2 in (19)
  • 1/2 INCH (18)
  • 1/2" NPT (7)
  • 1-1/2 (24)
  • 1-1/2 in (3)
  • 1-1/2 INCH (7)
  • 1-1/4 (16)
  • 1-1/4 in (3)
  • 1-1/4 INCH (4)
  • 2 (27)
  • 2 1/2 (4)
  • 2 in (2)
  • 2 INCH (8)
  • 2" (2)
  • 2.26 in x 2.26 in x 2.75 in (2)
  • 2.3 in (2)
  • 2.33 in x 2.33 in x 2.75 in (4)
  • 2.33 in x 2.33 in x 3.86 in (5)
  • 2.51 in x 2.51 in x 3.96 in (3)
  • 2.51 in x 2.51 in x 5.69 in (4)
  • 2.64" (3)
  • 2.77 in x 2.77 in x 3.94 in (2)
  • 2.77 in x 2.77 in x 5.67 in (3)
  • 2.78 in x 1.53 in x 1.53 in (2)
  • 2.8 in (5)
  • 2-1/2 (9)
  • 2-1/2 in (3)
  • 2-1/2 Inch (6)
  • 3 (16)
  • 3 1/2 (6)
  • 3 in (2)
  • 3 INCH (5)
  • 3.28 in x 1.7 in x 1.23 in (3)
  • 3.28 in x 1.70 in x 1.23 in (2)
  • 3.3 in (24)
  • 3.3" (15)
  • 3.4" (3)
  • 3.75" (4)
  • 3.8 in (16)
  • 3.8" (5)
  • 3/4 (48)
  • 3/4 in (17)
  • 3/4 INCH (15)
  • 3/4" NPT (4)
  • 3/8 (22)
  • 3/8 in (9)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 3/8 INCH (3)
  • 3-1/2 (4)
  • 3-1/2 Inch (2)
  • 4 (13)
  • 4 in (5)
  • 4 INCH (6)
  • 4" (3)
  • 4.4" (2)
  • 4.75" (2)
  • 6.0 IN Length 4.0 IN Width 0.5 IN Height (2)
  • 6.0 IN Length 4.0 IN Width 0.6 IN Height (2)
  • 6.0 IN Length 6.0 IN Width 6.0 IN Height (1)
  • 6.37 in x 2.56 in x 2.56 in (4)
  • 6.50 in x 2.56 in x 2.50 in (4)
  • 7.5 (2)
  • F2 (9)
  • F3 (6)
  • F4 (2)
  • H=1.01 - W=.717 - ID=.252 (3)
  • H=1.13 - W=.795 - ID=.327 (3)
  • H=1.25 - W=.906 - ID=.354 (2)
  • L(0.978) x W(0.978) x H(1.792) (4)
  • L(0.978) x W(0.978) x H(1.963) (2)
  • L(1.040) x W(1.040) x H(1.827) (2)
  • L(1.230) x W(1.230) x H(2.250) (4)
  • L(1.280) x W(1.280) x H(2.205) (2)
  • L(1.390) x W(1.000) x H(1.000) (2)
  • L(1.410) x W(0.850) x H(0.850) (3)
  • L(1.420) x W(1.420) x H(2.376) (2)
  • L(2.682) x W(3.645) x H(3.645) (2)
  • L(2.874) x W(4.107) x H(4.107) (2)
  • Length 1-13/16 inch (1)
  • Standard (3)
  • Standard Sized (2)
  • Standard Sized Product (7)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Show More...

• Knockout Size

  

  • 1 in (6)
  • 1/2 in (16)
  • 1-1/2 in (2)
  • 1-1/4 in (4)
  • 2 in (2)
  • 3/4 in (8)
  • Show More...

• Housing Material

  

  • Aluminum (8)
  • Copper (6)
  • Thermoplastic (5)
  • Show More...

• Wire Type

  

  • Al/Cu (3)
  • ALUMINUM/COPPER (2)
  • Class A & B (6)
  • Class B & C (5)
  • COPPER (11)
  • CU Wire Only (24)
  • SOLID, STRANDED (1)
  • Solid, Stranded, Stranded (Tin Bonded) (3)
  • STRANDED (1)
  • Show More...

• Thread Size

  

  • 0.63 in (2)
  • 1 in (8)
  • 1 in NPT (4)
  • 1/2 in (24)
  • 1/2 in NPT (3)
  • 1/2 Inch Threaded (2)
  • 1-1/2 in NPT (4)
  • 1-1/4 in NPT (3)
  • 2 in NPT (4)
  • 2-1/2 in NPT (2)
  • 3 in NPT (4)
  • 3/4 in (21)
  • 3/4 in NPT (5)
  • 3/4 Inch Threaded (2)
  • 4 in NPT (2)
  • Show More...

• Number Of Mounting Holes

  

  • 1 (10)
  • 2 (2)
  • Show More...

• Construction

  

  • Concrete Tight (9)
  • Die-Cast (4)
  • N/A (5)
  • Show More...

• Insulation Material

  

  • Flame Retardant Polycarbonate (3)
  • PVC (3)
  • Silicon Bronze (2)
  • Thermoplastic (14)
  • Show More...

• Minimum Qty

  

  • 10 (2)
  • 100 (33)
  • 1000 (2)
  • 15 (1)
  • 150 (4)
  • 20 (1)
  • 20000 (1)
  • 25 (2)
  • 250 (6)
  • 30 (1)
  • 350 (1)
  • 50 (10)
  • 500 (15)
  • 75 (1)
  • 750 (1)
  • Show More...

• Temperature Rating

  

  • 105 (2)
  • 105 C (9)
  • 105 DEG C (2)
  • 105 DEG C Shell Rated (3)
  • 105?°C (24)
  • 5-15P (2)
  • 90 (1)
  • 90 C (4)
  • 900 DEG F (1)
  • Show More...

• Insulation Color

  

  • Black (2)
  • Blue (5)
  • Blue/Gray (2)
  • Gray (4)
  • Green (3)
  • Orange (3)
  • Purple (3)
  • Red (12)
  • Tan/Red (2)
  • Yellow (10)
  • Show More...

• Style

  

  • (blank) (5)
  • Traditional (2)
  • Transitional (6)
  • Show More...

• Minimum Conductor Size

  

  • #14 AWG (12)
  • #2 AWG (3)
  • #22 AWG (5)
  • #6 AWG (8)
  • #6 AWG (Stranded) (7)
  • #8 AWG (2)
  • (2) #14 AWG (5)
  • (2) #18 AWG (10)
  • (2) #20 AWG (2)
  • (2) #22 AWG (2)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (3)
  • (3) #22 AWG (2)
  • 0.08 mm^2;28 AWG (2)
  • 250 MCM (2)
  • 4/0 AWG (1)
  • Show More...

• Insulation Type

  

  • Non-Insulated (5)
  • UNINSULATED (3)
  • Show More...

• Cable Type

  

  • CAT 5/CAT 5e (2)
  • CAT5e (8)
  • CAT6 (6)
  • RG59 (2)
  • RG6 (2)
  • RG-6 Reg/Tri/Quad (3)
  • RG6/6Q (2)
  • Show More...

• Color Code

  

  • ANSI 61 (2)
  • BLACK (1)
  • BLUE (6)
  • BROWN (6)
  • GRAY (2)
  • ORANGE (3)
  • Orchid (5)
  • PINK (2)
  • RED (3)
  • WHITE (3)
  • YELLOW (4)
  • Show More...

• Stud Size

  

  • 1/2 (4)
  • 1/4 (2)
  • Show More...

• Cable Entry

  

  • Back (2)
  • Black (3)
  • Push-In tabs for NM cable (2)
  • Two piece steel clamp with tabs to insert through knockout (4)
  • Show More...

• Maximum Conductor Size

  

  • #12 AWG (3)
  • #2 AWG (Stranded) (3)
  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #8 AWG (3)
  • (2) #14 AWG (2)
  • (2) #6 AWG (2)
  • (2) #8 AWG (2)
  • (3) #10 AWG (2)
  • (3) #12 AWG (6)
  • (3) #16 AWG (3)
  • (4) #12 AWG (2)
  • (5) #12 AWG (10)
  • 1/0 AWG (4)
  • 1/0 AWG (Stranded) (3)
  • 2.5 mm^2;12 AWG (2)
  • 2/0 AWG (2)
  • 2/0 AWG (Stranded) (2)
  • 250 kcmil (2)
  • 250 MCM (3)
  • 3/0 AWG (2)
  • 300 MCM (1)
  • 350 kcmil (2)
  • 350 MCM (1)
  • 500 MCM (2)
  • 600 kcmil (2)
  • 600 MCM (2)
  • Show More...

• Standard Package

  

  • 10 (4)
  • 1000 PER CASE (1)
  • 15 (5)
  • 2 (2)
  • 20 (6)
  • 3 in (2)
  • 30 (2)
  • 4 (4)
  • 40 (3)
  • 5 in (2)
  • 5 PER CARTON (1)
  • 6 (1)
  • 8 W (2)
  • Show More...

• Overall Length

  

  • 0.571 in;14.5 mm (2)
  • 1.47 in (4)
  • 1-15/32 in (4)
  • 2 in (2)
  • 3.18 in (2)
  • 3-3/16 in (2)
  • 4 in (3)
  • 4-3/16 in (2)
  • Show More...

• Depth

  

  • .327 (2)
  • .748 (3)
  • Show More...

• Wattage

  

  • 1 (2)
  • 12 (3)
  • 3 (1)
  • 4 (1)
  • 5 (2)
  • 7 (2)
  • 8 (1)
  • 9,600 (2)
  • Electrical power is expressed in Amps and Volts. (8)
  • Show More...

• Thread Length

  

  • 0.406 in (4)
  • 0.64 in (2)
  • 0.84 in (3)
  • 1.25 INCH (1)
  • 1.375 INCH (1)
  • 1.5 INCH (1)
  • 3/8 in (2)
  • 5/8 in (3)
  • 7/16 in (2)
  • 9/16 in (3)
  • Show More...

• Height

  

  • .411 (3)
  • 0.71 (2)
  • 0.87 in (4)
  • 0.978 in (3)
  • 1.13 (2)
  • 1.230 in (3)
  • 1.31 in (2)
  • 1.8 (1)
  • 1/2 in;12.7 mm (2)
  • 12 (1)
  • 1-7/8 in (2)
  • 2 (3)
  • 3.28 in (3)
  • 4 (1)
  • 6 (1)
  • 8 (1)
  • Show More...

• Number Of Gangs

  

  • 1 (2)
  • 1.0 (2)
  • 3 (1)
  • Show More...

• Thickness

  

  • 0.04 INCH (1)
  • 1/4 in (2)
  • Show More...

• Cord Size

  

  • 0.43 TO 0.54 INCH (2)
  • 0.5 TO 0.625 INCH (1)
  • 0.625 TO 0.75 INCH (1)
  • Show More...

• Conductor Size

  

  • 12 TO 10 AWG (1)
  • 4 AWG (1)
  • Show More...

• Cover Type

  

  • HINGED (1)
  • SCREW (1)
  • Show More...