Products by Nsi Industries (9)
Products by Nsi Industries (9)
280-288 of 431
CT106 - Nsi

Copper C Tap Grounding Connector For 3 to 4 Awg Copper "C" Taps Ensure Positive, All Around Compression With Low-Resistance and High Pull-Out Values. Made Of High Conductivity Copper, They Satisfy The Requirements Of NEC250-81 and 250-91 For Connecting to The Grounding Electrode System. Rated 600 Volts.

  • MFR Part #: CT-106
  • Nacogdoches Availability: 0
  • Total Availability: 215
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 100 ($1,708.85) ·
CT106 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$1,708.85

Per 100

QTY:
Each
Add
IPCS5040 - Nsi

Insulation Piercing Connector 500 MCM - 2/0 Awg Insulation Piercing Connectors Are Made For Use With Copper-Copper, Copper to Aluminum and Aluminum to Aluminum Applications. They Are Safe to Use and Are Completely Insulated, No Need to Strip Wire. They Can Be Installed On Energized Conductors With No Contact At Any Point. No Spacer Required Between Connections. Exclusive "Turbo Spacer" Keeps Tap Side Open While Main Conductor Is Being Tightened. Watertight and Corrosion-Free.

  • MFR Part #: IPCS5040
  • Nacogdoches Availability: 0
  • Total Availability: 6
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 1 ($150.88) ·
IPCS5040 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$150.88

Each

QTY:
Each
Add
IPL5003 - Nsi

The Polaris IPL500-3 Multi-Tap Single Side Entry Connector Features 3 Ports Sized For 500 MCM - 4 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

  • MFR Part #: IPL500-3
  • Nacogdoches Availability: 0
  • Total Availability: 17
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($260.25) ·
IPL5003 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$86.75

Each

QTY:
Each
Add
IPLD25010 - Nsi

The Polaris IPLD250-10 Multi-Tap Dual-Sided Entry Connector Features 10 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Tra

  • MFR Part #: IPLD250-10
  • Nacogdoches Availability: 0
  • Total Availability: 12
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 2 ($384.10) ·
IPLD25010 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$192.05

Each

QTY:
Each
Add
ISR250C - Nsi

The Polaris Isr-250C Multi-Tap Multi-Tap In-Line Entry Connector Features 2 Ports Sized For 250 MCM - 6 Awg Wires. The Clear Body Allows Users to See Their Conductor Placement and Is Wrapped In A Layer Of Plastisol Insulation. Each In-Line Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Inc

  • MFR Part #: ISR-250C
  • Nacogdoches Availability: 0
  • Total Availability: 6
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 4 ($214.88) ·
ISR250C - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$53.72

Each

QTY:
Each
Add
IT010 - Nsi

Insulation-Tap Connector, #14 Awg Conductor Size, 1/0 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 2 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 1.62 In Overall Length, Screw Terminal, 600 V, 0.13 LB/Ea

  • MFR Part #: ITO-1/0
  • Nacogdoches Availability: 0
  • Total Availability: 3
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($177.72) ·
IT010 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$29.62

Each

QTY:
Each
Add
PT0250 - Nsi

Offset Pin Terminal 250 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

  • MFR Part #: PTO-250
  • Nacogdoches Availability: 0
  • Total Availability: 20
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 10 ($515.74) ·
PT0250 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$5,157.43

Per 100

QTY:
Each
Add
IPL2504 - Nsi

The Polaris IPL250-4 Multi-Tap Single Side Entry Connector Features 4 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

  • MFR Part #: IPL250-4
  • Nacogdoches Availability: 0
  • Total Availability: 10
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 6 ($343.44) ·
IPL2504 - Nsi Industries

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$57.24

Each

QTY:
Each
Add
ISPB020 - Nsi

The Polaris ISPBO2/0 Multi-Tap Direct Burial Submersible Offset Port Connector Features 3 Ports, Two On One Side and One On The Other, Sized For 2/0 - 14 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Offset Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Meets or

  • MFR Part #: ISPBO2/0
  • Nacogdoches Availability: 1
  • Total Availability: 19
  • Manufacturer: Nsi
  • Find: Similar Items
  • Pkg Sizes: 3 ($167.37) ·
ISPB020 - Nsi Industries

Nacogdoches Availability: In Stock

Total Availability: In Stock

Book Price

$55.79

Each

QTY:
Each
Add
CT106 - Nsi

Copper C Tap Grounding Connector For 3 to 4 Awg Copper "C" Taps Ensure Positive, All Around Compression With Low-Resistance and High Pull-Out Values. Made Of High Conductivity Copper, They Satisfy The Requirements Of NEC250-81 and 250-91 For Connecting to The Grounding Electrode System. Rated 600 Volts.

MFR Part #:
CT-106
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
215 Each
Pkg Sizes:
100 Each ($1,708.85)
IPCS5040 - Nsi

Insulation Piercing Connector 500 MCM - 2/0 Awg Insulation Piercing Connectors Are Made For Use With Copper-Copper, Copper to Aluminum and Aluminum to Aluminum Applications. They Are Safe to Use and Are Completely Insulated, No Need to Strip Wire. They Can Be Installed On Energized Conductors With No Contact At Any Point. No Spacer Required Between Connections. Exclusive "Turbo Spacer" Keeps Tap Side Open While Main Conductor Is Being Tightened. Watertight and Corrosion-Free.

MFR Part #:
IPCS5040
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
6 Each
Pkg Sizes:
1 Each ($150.88)
IPL5003 - Nsi

The Polaris IPL500-3 Multi-Tap Single Side Entry Connector Features 3 Ports Sized For 500 MCM - 4 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

MFR Part #:
IPL500-3
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
17 Each
Pkg Sizes:
3 Each ($260.25)
IPLD25010 - Nsi

The Polaris IPLD250-10 Multi-Tap Dual-Sided Entry Connector Features 10 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Dual-Sided Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Tra

MFR Part #:
IPLD250-10
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
12 Each
Pkg Sizes:
2 Each ($384.10)
ISR250C - Nsi

The Polaris Isr-250C Multi-Tap Multi-Tap In-Line Entry Connector Features 2 Ports Sized For 250 MCM - 6 Awg Wires. The Clear Body Allows Users to See Their Conductor Placement and Is Wrapped In A Layer Of Plastisol Insulation. Each In-Line Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Inc

MFR Part #:
ISR-250C
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
6 Each
Pkg Sizes:
4 Each ($214.88)
IT010 - Nsi

Insulation-Tap Connector, #14 Awg Conductor Size, 1/0 Awg Conductor Size, Insulated, Plastisol Insulation Material, Copper/Aluminum Conductor Material, Black Insulation Color, 2 Conductors, -45 °C Operating Temperature, +90 °C Operating Temperature, 1.62 In Overall Length, Screw Terminal, 600 V, 0.13 LB/Ea

MFR Part #:
ITO-1/0
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
3 Each
Pkg Sizes:
6 Each ($177.72)
PT0250 - Nsi

Offset Pin Terminal 250 MCM All-Aluminum Pin Terminals Is Designed For Termination Of Both Aluminum and Copper Conductors. The Pin Is Offset For Use In Tight Spaces and For Ease Of Installation In Side-By-Side Terminations. The Solid Pin Is Made Of Aluminum and Is Tin-Plated and Pre-Filled With Oxide Inhibitor. A Cover Is Provided For Quick Installation. Rated 600 Volts.

MFR Part #:
PTO-250
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
20 Each
Pkg Sizes:
10 Each ($515.74)
IPL2504 - Nsi

The Polaris IPL250-4 Multi-Tap Single Side Entry Connector Features 4 Ports Sized For 250 MCM - 6 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of Plastisol Insulation. Each Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Connections. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Designed For Use In A Wide Range Of Splicing Applications, Including Installation In Cable Trays, Panel Boa

MFR Part #:
IPL250-4
Manufacturer:
Nsi
Local Availability:
Out Of Stock
Total Availability:
10 Each
Pkg Sizes:
6 Each ($343.44)
ISPB020 - Nsi

The Polaris ISPBO2/0 Multi-Tap Direct Burial Submersible Offset Port Connector Features 3 Ports, Two On One Side and One On The Other, Sized For 2/0 - 14 Awg Wires. The Body Is Made From Aluminum Alloy Wrapped In A Layer Of High-Dielectric Strength Rubber Insulation. Each Offset Port Is Pre-Loaded With An Oxide Inhibitor, With Removable Access Plugs Over The Hex Screws Used to Tighten The Radial-Tipped Set Screws. Installs With A Hex Key and Torque Wrench, Without Any Tape or Additional Supplies. Meets or

MFR Part #:
ISPBO2/0
Manufacturer:
Nsi
Local Availability:
In Stock
Total Availability:
19 Each
Pkg Sizes:
3 Each ($167.37)

Begin Live Chat